Ladyada's Electronics Toolkit

PRODUCT ID: 136

Starting out on your electronics adventure? Want to wield the mighty soldering iron? Tired of saying "I'd totally get into electronics if I...

Starting out on your electronics adventure? Want to wield the mighty soldering iron? Tired of saying "I'd totally get into electronics if I only knew what tools to get..."? Working with substandard equipment is a terrible way to learn electronics: a lot of frustration with too little success. The right tool set will keep you progressing without the stressing. This toolbox contains carefully selected hand tools that will last you...

$100.00

74 IN STOCK

Panel Volt Meter - 4.5V to 30VDC

PRODUCT ID: 575

Put a voltage meter anywhere with this very handy display. This panel meter simply connects to whatever DC supply you are trying to track, easy to...

Put a voltage meter anywhere with this very handy display. This panel meter simply connects to whatever DC supply you are trying to track, easy to wire up! Simply connect the red wire to the positive supply, and black to negative ground. The display has a microcontroller that will read the voltage, compare it to a stable reference and display the voltage with 0.1V precision on a 3-digit 0.56" tall 7-segment display. It works from 4.5V up to...

$7.95

IN STOCK

Adafruit PCB Ruler v2 - 6"

PRODUCT ID: 1554

The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens...

The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of different names too! QFN, TDFN, SOIC, SOP, J-Lead, what do they mean and how can you tell how big they are? Now you can have a reference board at your fingertips, with this snazzy PCB reference ruler. Measuring approx 1" x 6", this standard-thickness FR4, gold plate ruler has the most...

$4.95

IN STOCK

Helping Third Hand Magnifier W/Magnifying Glass Tool - MZ101

PRODUCT ID: 291

The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for...

The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for holding small PCBs and wires for tinning or soldering to parts. Every part can rotate around in any way with thunbscrews and wingnuts. Two sturdy alligator clips for holding PCBs, wires, parts 2.5" diameter 4x magnifying glass good for checking out your soldering technique Weighted base keeps...

$6.00

IN STOCK

Mini 3-wire Volt Meter (0 - 99.9VDC)

PRODUCT ID: 705

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it...

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used for measurement. We also have a 2-wire version that measure it's own power supply. Simply connect the red wire to a positive power supply from 4.5 to...

$7.95

IN STOCK

Solder wick - 3S 5ft.

PRODUCT ID: 149

5ft spool - Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount...

5ft spool - Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up.

$3.00

IN STOCK

Simple pliers

PRODUCT ID: 146

Simple needlenose pliers for twisting, pulling and pliering your project.

$3.00

IN STOCK

Fine tip curved tweezers - ESD safe - 120mm

PRODUCT ID: 422

When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day...

When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component. This particular model is 120mm long with a 9mm / 0.35" gap at the tips while open, this allows it to pick up components with better precision for...

$3.95

IN STOCK

Solder sucker

PRODUCT ID: 148

Strangely enough, that's the technical term for this desoldering vacuum tool. Useful in cleaning up mistakes, every electrical engineer has one of...

Strangely enough, that's the technical term for this desoldering vacuum tool. Useful in cleaning up mistakes, every electrical engineer has one of these on their desk. To use, depress the end to engage the vacuum. Then heat up the to-be-desoldered joint until it is liquid. With your other hand hold the plastic tip as close as possible to the joint and depress the button to suck up all the liquid solder. If necessary, clean up the remaining...

$5.00

IN STOCK

Multi-Colored Heat Shrink Pack - 3/32" + 1/8" + 3/16" Diameters

PRODUCT ID: 1649

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores....

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores. This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional black. Each pack contains ten 6" pieces of the following sizes: 3/32", 1/8", and 3/16". You get three of each in black and red, and one of each in...

$4.95

IN STOCK

Precision Straight Tweezers - Rhino SW-11

PRODUCT ID: 3096

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the...

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the ready such as these Rhino SW-11 Tweezers ! They are sharp, straight, and super luxurious. These are our favorite pair of small-component-grabbing tweezers. They're anti-static, anti-magnetic, anti-acid, conductive, and made of hard and frosted stainless steel (although the tips are so...

$9.95

IN STOCK

Flush diagonal cutters - CHP170

PRODUCT ID: 152

These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've...

These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.

$7.25

IN STOCK

Heat Shrink Pack

PRODUCT ID: 344

Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to...

Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super handy. Pack contains four 6" pieces of the following sizes: 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" 2:1 shrink ratio High-grade flexible polyolefin material UL approved

$4.95

IN STOCK

Fine tip straight tweezers - ESD safe - 135mm

PRODUCT ID: 421

When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These tweezers are a great pair of...

When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These tweezers are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component. This particular model is 135mm long with a 12.5mm / 0.5" gap at the tips while open, this allows it to pick of fairly large TQFP's and...

$3.95

IN STOCK

Panel Current Meter - 0 to 9.99A

PRODUCT ID: 574

Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to...

Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hook up! Since current sensors are a little more complex than volt meters, and its easy to confuse the wires, please read carefully to understand how to wire it together! The current meter has two sets of wires, one thin (red and...

$9.95

IN STOCK

Mini Solder spool - 60/40 lead rosin-core solder 0.031" diameter - 100g

PRODUCT ID: 145

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and...

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.031" diameter, 60/40 'no clean' rosin core. Good for all through-hole soldering and some larger SMT soldering (especially when used with wick). This solder is not lead-free, but that's OK for European/UK customers as...

$7.95

IN STOCK

Mini 2-wire Volt Meter (3.2 - 30 VDC)

PRODUCT ID: 460

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it...

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 2-wire version of the volt meter, two wires are used to power it and measure at the same time. We also have a 3-wire version that measure a wider range of voltages. Simply connect the red wire to the positive supply, and black to negative ground....

$7.95

IN STOCK

Professional Silicone-Tip Solder Sucker

PRODUCT ID: 1597

Ever go to a diner and they give you a bottle of ketchup and it says "Extra Fancy" and you're thinking to yourself "what makes...

Ever go to a diner and they give you a bottle of ketchup and it says "Extra Fancy" and you're thinking to yourself "what makes this ketchup 'extra fancy' anyhow?" Well, this professional grade solder sucker is "Extra Fancy" and there's no question as to why. When you hold its machined aluminum body, you'll think "Fancy!", the smooth action and release is also "Fancy" and the...

$17.50

IN STOCK

Hakko Professsional Quality 20-30 AWG Wire Strippers - CSP-30-1

PRODUCT ID: 527

These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very...

These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground notches that do a perfect job every time. No more yanking or twisting to strip wires cleanly and quickly. If you're on a budget, check out our basic wire strippers - they're not as sharp and precise but will do the job for hobbyist work.

$14.95

IN STOCK

Soldering iron stand

PRODUCT ID: 150

A real stand with sponge and double spring prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a...

A real stand with sponge and double spring prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering iron, this is essential for your safety. Comes with a sponge, too! Soldering iron not included, but we have it in the store!

$6.00

IN STOCK

Solder Wire - 60/40 Rosin Core - 0.5mm/0.02" diameter - 50 grams

PRODUCT ID: 1886

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too...

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder contains approximately 0.6mm / .02" diameter in standard 60/40 formulation. This is not lead-free solder, so not for lead-free/RoHS shops. However, for kit builders its a joy to use, much easier than lead-free and great for...

$5.95

IN STOCK

Adjustable 30W 110V soldering iron - XY-258 110V

PRODUCT ID: 180

This 'pen-style' soldering iron is just about the best entry-level tool I've seen. It's not as powerful as a Weller WES51 but it is...

This 'pen-style' soldering iron is just about the best entry-level tool I've seen. It's not as powerful as a Weller WES51 but it is self-contained and easy to use. With proper care it will last for many years. Turn it off when not in use, clean the plated tip with a sponge (no filing or sanding!) The screwdriver tip is perfect for through-hole soldering and can also do some larger surface mount. Plug is 110 US-style and can only...

$22.00

IN STOCK

Pogo Pin Probe Clip

PRODUCT ID: 1969

The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a...

The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a built in springy pogo pin - so you can connect to any PCB pad for 'scoping, analyzing or multimetering The clip is strong enough to grip onto a PCB, but has a soft grip so it won't mar or damage circuits. The 'tongue' is a round-tip pogo pin - a little spring-loaded contact...

$2.95

IN STOCK

Multi-size wire stripper & cutter - 5023

PRODUCT ID: 147

We've upgraded our basic 'adjustable' wire strippers to these multi-sized wire strippers. They include: 20-30 AWG strippers, wire...

We've upgraded our basic 'adjustable' wire strippers to these multi-sized wire strippers. They include: 20-30 AWG strippers, wire cutters, 'plier' tips, and a wire loop. Ground blades for precision cutting. Spring return, comfy molded handles and a closing-lock. Great for general usage, we use them for standard 22 AWG solid-core breadboarding wire and 26 AWG stranded ribbon cable, sometimes for other thin wires like thicker...

$6.95

IN STOCK

ESD-Safe PCB Cleaning Brush

PRODUCT ID: 1209

Neat-freaks! Put down that toothbrush and pick up this nice ESD-safe cleaning brush! If you want to have a nice clean board (or maybe you're doing...

Neat-freaks! Put down that toothbrush and pick up this nice ESD-safe cleaning brush! If you want to have a nice clean board (or maybe you're doing some repair) you can use this stiff-bristled brush without worries. Some people like to drip a little rubbing alcohol on their PCBs after soldering and then scrubbing to remove rosin/flux. Finally, you have the right tool for the job. About 7" long from end to end, scrubby part is 1.5" x 0.5" with...

$2.95

IN STOCK

Panavise Jr. - PV-201

PRODUCT ID: 151

The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and...

The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and doesn't mind if you hit it with the soldering iron by accident. Made in the USA. The easy-to-use single knob controls head movement through 3-planes: 210° Tilt, 360° Turn & 360° Rotation Fine/coarse adjusting knob controls jaw pressure for delicate work Grooved jaws are excellent for...

$28.00

IN STOCK

Hakko Brass Sponge Solder Tip Cleaner

PRODUCT ID: 1172

This brass sponge is super glam and super useful. Preferred by many soldering pros for cleaning off the tips of their soldering irons, it never needs...

This brass sponge is super glam and super useful. Preferred by many soldering pros for cleaning off the tips of their soldering irons, it never needs wetting, wont cool down the tip, and its slightly abrasive to remove caked-on flux. This model is made by Hakko so you know it's not only good-looking but a pleasure to use. Hakko Brass Sponge Solder Tip Cleaner (10:10)

$10.95

IN STOCK

Digital Multimeter - Model 9205B+

PRODUCT ID: 2034

This massive multimeter has everything but the kitchen sink included. It's a great addition to any work bench or tool box. It's low cost,...

This massive multimeter has everything but the kitchen sink included. It's a great addition to any work bench or tool box. It's low cost, simple to use, and has a big clear display with all the measurements you need and more! The multimeter includes: AC/DC Voltage measurement Current measurement, from 2mA range up to 20A range (both AC and DC) Beeping continuity test, and diode test for measuring voltage and lighting up LEDs Resistance...

$17.50

IN STOCK

Hakko Soldering Tip: T18-S4 Fine SMD - For Lead or Lead-Free Use

PRODUCT ID: 1249

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits...

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (simply set the iron to the temperature required for the solder you are using). This is a "Fine Point" tip, great for any SMT soldering...

$9.95

IN STOCK

Fixture Clip - Short

PRODUCT ID: 2458

Doesn't this fixture clamp look like a character in a Pixar movie? If you just drew two little eyes on it then you could just...

Doesn't this fixture clamp look like a character in a Pixar movie? If you just drew two little eyes on it then you could just imagine it hopping around on nifty, adorable little adventures that are heartwarming and...sorry, we got carried away. This fixture clamp is a great way to hold a printed circuit board in place while you're testing or programming. It comes with two mounting screws so you can attach the...

$0.95

IN STOCK

Third Hand Pana Hand Workstation Add-On for Panavise

PRODUCT ID: 3019

We've really gotta HAND it to them, the Third Hand Pana Workstation brings the benefits of the Super Fancy Third Hand Kit to the PanaVise...

We've really gotta HAND it to them, the Third Hand Pana Workstation brings the benefits of the Super Fancy Third Hand Kit to the PanaVise line of work holding vises. This is the most luxurious desktop work-holding solution we've laid our hands on. Note: Panavise Jr. and Panavise Multi-Purpose Work Center + base are not included! The gold-color anodized base of the Pana Workstation has integrated mounting holes to be seamlessly...

$54.95

48 IN STOCK

Digital Genuine Hakko FX-888D (936 upgrade) - FX-888D

PRODUCT ID: 1204

Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888D with digital temperature control ! We...

Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888D with digital temperature control ! We worked hard to get the best and a great price, these are not knock-offs. This iron is an upgrade to the venerable Hakko 936 - smaller footprint but more powerful for a faster heat up time. The Hakkos have quality construction, this iron is the last one you'll need for decades. Heats up in 30...

$109.95

IN STOCK

Bus pirate basic probe set

PRODUCT ID: 238

This is a interface cable designed for Bus Pirate which can makes it easier to connect the Bus Pirate to a circuit and get hacking!

$7.00

23 IN STOCK

Panel Temperature Meter / -30 to +70 °C

PRODUCT ID: 576

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in...

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident. To use, simply connect the thin red wire to a positive supply, and the thin black wire to ground. Then tape the black thermistor bulb to whatever you want to...

$9.95

98 IN STOCK

IFixit Jimmy - Electronics Opening Knife

PRODUCT ID: 2414

The all-mighty Jimmy from IFixIt is the best way out from an iRock and an iHardPlace. Slide, cut, twist, poke, slice, part, uproot,...

The all-mighty Jimmy from IFixIt is the best way out from an iRock and an iHardPlace. Slide, cut, twist, poke, slice, part, uproot, divide, lift, dissect, separate, and pry your devices to check out their insides, void your warranties, and mod your gear. The Jimmy is a high-quality flexible steel blade that easily slips between the tightest gaps in the toughest devices. Bust through your previously unpenetrable...

$7.95

IN STOCK

Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB

PRODUCT ID: 2107

Have some USB logic analyzer, multimeter or oscilloscope and bumping up against the frustation of a shared earth ground? The Offspring (known for...

Have some USB logic analyzer, multimeter or oscilloscope and bumping up against the frustation of a shared earth ground? The Offspring (known for being electrical engineers) wisely sang "Ya gotta keep'em isolated!" Power and signal isolation improves common-mode voltage, enhances noise rejection, and permits two circuits to operate at different voltage levels. This handy little low-cost USB isolator is exactly what you...

$34.95

40 IN STOCK

Solder Wire - SAC305 RoHS Lead Free - 0.5mm/.02" diameter - 50g

PRODUCT ID: 1930

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too...

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder contains approximately 0.5mm / .02" diameter in standard SAC305 formulation. This is lead-free solder, so great for lead-free/RoHS shops. For flux, it contains a 'no clean' rosin core. Its good for all through-hole...

$14.95

99 IN STOCK

Bus Pirate - BPv3.6 - v3.6

PRODUCT ID: 237

Interfacing a new microchip can be a hassle. Breadboarding a circuit, writing code, hauling out the programmer, or maybe even prototyping a PCB. We...

Interfacing a new microchip can be a hassle. Breadboarding a circuit, writing code, hauling out the programmer, or maybe even prototyping a PCB. We never seem to get it right on the first try. The 'Bus Pirate' is a universal bus interface that talks to most chips from a PC serial terminal, eliminating a ton of early prototyping effort when working with new or unknown chips. Many serial protocols are supported at 0-5.5volts, more can be added....

$30.00

OUT OF STOCK

Precision screwdriver set (6 pieces)

PRODUCT ID: 424

Break seals! Void warranties! With this handy screwdriver set at your hands, all hardware you touch will open up and reveal their secret innards....

Break seals! Void warranties! With this handy screwdriver set at your hands, all hardware you touch will open up and reveal their secret innards. This set contains 6 screwdrivers, 3 Phillips (#1, #0 and #00) and 3 flat (2.4mm, 1.8mm and 1.4mm). These sizes will open up pretty much any consumer electronics you come across. We picked this set to carry because it is better quality than most low cost sets. Instead of thin metal rods, these have...

$7.95

IN STOCK

Carbide PCB Drill Bit - 0.9mm

PRODUCT ID: 2120

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to...

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces. But that's only half the job! You'll also need a way to drill some tiny and accurate holes. That's why we've started selling these PCB drill tips in a variety of sizes. They're made from carbide (tungsten steel) and are suitable for circuit boards,...

$1.95

51 IN STOCK

USB Microscope - 5MP interpolated 220x magnification / 8 LEDs

PRODUCT ID: 636

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and...

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 5.0 megapixel sensor inside and an optical magnifier that can adjust from 20x (for basic PCB inspection) to 220x (for detailed inspection). Eight white LEDs are angled right onto whatever you're...

$79.95

IN STOCK

Carbide PCB Drill Bit - 0.7mm

PRODUCT ID: 2119

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to...

$1.95

IN STOCK

Sugru - Black and White Pack

PRODUCT ID: 437

Sugru! Soft-touch silicone rubber that molds and sets permanently. Sticks to aluminum, steel, ceramics, glass, wood and some fabrics + plastics!...

Sugru! Soft-touch silicone rubber that molds and sets permanently. Sticks to aluminum, steel, ceramics, glass, wood and some fabrics + plastics! sugru is the incredible new air-curing rubber for hackers, makers, gadget lovers & anyone else who wants to make things or make their stuff work better. Self-adhesive to most other materials, and flexible when cured, sugru is a versatile tool for hackers and makers - Repair and strengthen damaged...

$17.95

99 IN STOCK

Toggle Clamp - Small Flip-down Style

PRODUCT ID: 2459

*Ka-thunk* Pin down that PCB with our Toggle Clamp , a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a...

*Ka-thunk* Pin down that PCB with our Toggle Clamp , a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but you have to somehow get that PCB aligned right and evenly pressed down on each pogo. After much experimenting, we settled on this toggle clamp and we use it all the time in our testing processes. This beauty is strong enough...

$3.95

IN STOCK

Hakko Soldering Tip: T18-D16 Screwdriver - For Lead or Lead-Free

PRODUCT ID: 1250

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits...

$7.95

IN STOCK

Adafruit USB Power Gauge Mini-Kit

PRODUCT ID: 1549

This little USB port go-between is like a speed gauge for your USB devices. Instead of hauling out a multimeter and splicing cables, plug this in...

This little USB port go-between is like a speed gauge for your USB devices. Instead of hauling out a multimeter and splicing cables, plug this in between for a quick reading on how much current is being drawn from the port. Great for seeing the charge rate of your phone or tablet, checking your battery chargers, or other USB powered projects. There are a few USB power meters out there, The Practical Meter and the USB Spypow. We wanted something...

$9.95

OUT OF STOCK

Replacement Tubes for Professional Silicone-Tip Solder Sucker - SS-02

PRODUCT ID: 2476

These Silicone Tubes are replacements for your fancy professional silicone-tipped solder sucker! You can just cut a new section off as...

These Silicone Tubes are replacements for your fancy professional silicone-tipped solder sucker! You can just cut a new section off as necessary. Silicone nozzles are particularly nice because they're both elastic and heat resistant (up to 350°C) so you can get in close to your soldering iron and suck up solder with little-to-no residue. With these 50mm spare tubes you can cut your desired length of tube freely and...

$1.95

IN STOCK

Super Fancy Third Hand Kit from Hobby Creek with Four Arms

PRODUCT ID: 2474

Frustrated with traditional third hands? Want a more adaptable tool? Love Doctor Octopus? Search no more! We present the ultra-fancy Third Hand...

Frustrated with traditional third hands? Want a more adaptable tool? Love Doctor Octopus? Search no more! We present the ultra-fancy Third Hand Kit . The Third Hand Kit comes with 4 bendable arms which can easily be positioned and are stiff enough to stay in place. Alligator clips are securely attached to the end of the arms using thread locker. There are both small and large clips which allow you to easily clip wires, circuits...

$44.95

5 IN STOCK

Pomona SMD Micro Grabber

PRODUCT ID: 2618

The highest quality test clips in the world! This Pomona SMD Grabber will last you years, if not decades. Use these to make your very own test cables...

The highest quality test clips in the world! This Pomona SMD Grabber will last you years, if not decades. Use these to make your very own test cables and jigs. Push down on the end to extend the grabber clip. When 'grabbing', the plastic shroud helps avoid shorting, a common annoyance with alligator clips. These are the really nice ultra small grabber that can snag TQFP and SOIC pins. The SMD Grabber clips are a great way to test and...

$4.50

IN STOCK

Hakko Precision Flat Pliers

PRODUCT ID: 1368

These Italian-made Hakko pliers are excellent for any precision work. The nose is flattened and fairly short to provide excellent control. The inside...

These Italian-made Hakko pliers are excellent for any precision work. The nose is flattened and fairly short to provide excellent control. The inside of the jaws is also flattened so they won't leave ridge-marks. And the grips are ultra comfy too, you can use these all days with no discomfort.

$11.95

76 IN STOCK

Atten 50-Watt Soldering Iron - SA-50

PRODUCT ID: 2163

Treat yourself with this wonderful pen type Atten 50-Watt Soldering Iron . We love the durability, strong grounded cord, nice handle, and fast heat...

Treat yourself with this wonderful pen type Atten 50-Watt Soldering Iron . We love the durability, strong grounded cord, nice handle, and fast heat up designed with PTC ceramic material! When you don't need a full soldering 'station' this pen type iron will fulfill your needs. At 50W it can handle any task you throw at it, and the lovely adjustable knob on the side lets you set the temperature so you get just the right temperature for your lead...

$29.95

75 IN STOCK

Extech EX330 12-function autoranging multimeter - EX330

PRODUCT ID: 308

If you're looking for one of the best multimeters, we're proud to now offer our personal favorite! The Extech EX330 "12 Function Mini...

If you're looking for one of the best multimeters, we're proud to now offer our personal favorite! The Extech EX330 "12 Function Mini MultiMeter + Non-Contact Voltage Detector. Autoranging DMM with NCV detector and Temperature function". This product is the winner of EEVBlog Multimeter Shootout (Extech press release) & Dave's site here and on top of that, its been our daily-use multimeter for over 3 years. It's...

$59.95

51 IN STOCK

Carbide Square End Mill - 1/8" Shaft - 0.8mm Diameter

PRODUCT ID: 2075

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC...

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting away the copper trace outlines. We initially ordered these end mills for our use with an Othermill but they will likely work great in a wide variety of precision CNC machines. While we already carry PCB drill bits, end mills are slightly...

$3.95

68 IN STOCK

ST-Link STM8/STM32 v2 Programmer & Emulator

PRODUCT ID: 2548

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller...

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy whenever you encounter them. You can even get 5V and regulated 3.3V power! Comes with one USB stick and a couple pieces of female-female jumpers. You may...

$12.50

85 IN STOCK

38 Piece Screwdriver Set

PRODUCT ID: 822

Look, over there at that thing! Take it apart! You can now attack just about every kind of box or enclosure that needs undoing with this 38-bit...

Look, over there at that thing! Take it apart! You can now attack just about every kind of box or enclosure that needs undoing with this 38-bit screwdriver set. This set is fine quality and excels at disassembling games, phones, cameras, and other small portable electronic goodies. What drew us to this tool box is its small compact size, the big grippy rubber handle (not a thin or slippery metal grip), the magnetic bit holder (which is not...

$14.95

49 IN STOCK

Super Scissors - PH-51

PRODUCT ID: 1599

Save your scissors! Instead of using your nice shears (and dulling them) or wire cutters (not right for the job) - use these super scissors....

Save your scissors! Instead of using your nice shears (and dulling them) or wire cutters (not right for the job) - use these super scissors. They're meant for engineering/maker cutting jobs such as cutting plastic, leather, copper sheet/wire, even coaxial & ribbon cables. There's a notched flat section and a grippy tooth section. Notched (front) section capabilities: Nylon/Kevlar fiber: Various types Copper braided wire: Various...

$14.95

56 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 36" - Red

PRODUCT ID: 2609

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 36" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

51 IN STOCK

SMD Component Testing Tweezers

PRODUCT ID: 1359

These tweezers are perfect for anyone who does a lot of work with SMD components (and hey, who isn't these days?) Use these instead of squinting...

These tweezers are perfect for anyone who does a lot of work with SMD components (and hey, who isn't these days?) Use these instead of squinting and trying to use clumsy multimeter probes to detect an LED's color, polarity or resistor/cap value! The multimeter 'probes' are the two tips of a tweezer-shaped multimeter. Simply 'grab' a resistor, capacitor, diode or LED to test. It has a "scanning" mode where it...

$27.95

14 IN STOCK

Toggle Clamp - Large Size - 201B

PRODUCT ID: 2457

*Ka-thunk* Pin down that PCB with our Toggle Clamp , a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great...

$4.95

85 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 36" - Black

PRODUCT ID: 2608

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 36" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

76 IN STOCK

Solder Wire - RoHS Lead Free - 0.5mm/.02" diameter - 50g

PRODUCT ID: 2473

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too...

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder is the less expensive version of our popular SAC305 RoHS solder. This is lead-free solder, so great for lead-free shops, however it's not SAC305, a formulation which some people prefer. For flux, it contains a 'no...

$11.95

1 IN STOCK

Toggle Clamp - Medium Flip-up Style

PRODUCT ID: 2456

*Ka-thunk* Pin down that little PCB with our Toggle Clamp , a sturdy and reliable way to quickly press and release with precision! A pogo-pin...

*Ka-thunk* Pin down that little PCB with our Toggle Clamp , a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but you have to somehow get that PCB aligned right and evenly pressed down on each pogo. After much experimenting, we settled on this toggle clamp and we use it all the time in our testing processes. This beauty is strong...

$3.95

89 IN STOCK

Deluxe Solder Stand with Solder Roll Holder

PRODUCT ID: 1154

This is such a sweet soldering stand, we had to carry it in the shop. It comes with a nice heavy metal frame, a double-wrapped soldering iron tube to...

This is such a sweet soldering stand, we had to carry it in the shop. It comes with a nice heavy metal frame, a double-wrapped soldering iron tube to keep your hands safe, a removable sponge and (best of all) a solder roll holder! Upgrade your setup for some luxurious soldering action. Comes with the metal stand, and sponge. Take a few minutes to put together with a screwdriver. Doesn't include a soldering iron or solder! Fits every soldering...

$17.50

64 IN STOCK

GoodFET v42 by Travis Goodspeed - v4.2

PRODUCT ID: 1279

The GoodFET is an open-source JTAG adapter, loosely based upon the TI MSP430 FET UIF and EZ430U boards, as described in their documentation. It has...

The GoodFET is an open-source JTAG adapter, loosely based upon the TI MSP430 FET UIF and EZ430U boards, as described in their documentation. It has expanded to be useful as a microcontroller multitool, with 'clients' for programming/debugging MSP430 JTAG, Nordic RF, Chipcon 8051/SPI, AVR, PIC, etc. A handy tool for advanced microcontroller work, and especially for MSP430 fans who want their own JTAG debugger for everyday use. Comes as a...

$49.95

28 IN STOCK

Carbide PCB Drill Bit - 0.5mm

PRODUCT ID: 2118

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to...

$1.95

IN STOCK

DSO Nano v3 - Pocket-size color digital oscilloscope - v3.0

PRODUCT ID: 468

This cute pocket oscilloscope is a perfect companion to your tool box. For beginners, its a good starter scope - it is not as complicated as a...

This cute pocket oscilloscope is a perfect companion to your tool box. For beginners, its a good starter scope - it is not as complicated as a benchtop scope so its easy to use. For advanced EE's, its useful as a scope-on-the-go, for field-debugging, when you don't want to drag your scope over, or when a floating-ground is needed (it will naturally do 'differential' measurements as long as its not plugged into a computer USB...

$99.95

12 IN STOCK

Pomona Female 0.1" Socket to Banana Plug - 24" - Red

PRODUCT ID: 2666

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop...

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Red version . We also carry this cable in black. This Female Socket to Banana Plug cable is terrific for prototyping or for use as a jumper on circuit boards, you can shove a ~22AWG solid...

$8.00

46 IN STOCK

Carbide PCB Drill Bit - 1.1mm

PRODUCT ID: 2121

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to...

$1.95

26 IN STOCK

Pomona Female 0.1" Socket to Banana Plug - 24" - Black

PRODUCT ID: 2665

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop...

We have a couple of these handy Pomona Female 0.1" Socket to Banana Plug 24" cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Black version . We also carry this cable in red. This Female Socket to Banana Plug cable is terrific for prototyping or for use as a jumper on circuit boards, you can shove a ~22AWG solid...

$8.00

51 IN STOCK

Hot Air Soldering Rework Station w/ Three Nozzles - Quick 957D

PRODUCT ID: 1869

If you've ever made a mistake when surface-mount soldering, you'll know how much of a pain it can be to fix it without the right tools. It...

If you've ever made a mistake when surface-mount soldering, you'll know how much of a pain it can be to fix it without the right tools. It can add critical time to a project and can seriously dampen your soldering momentum if you run into a bad component or a faulty reflow. With the Quick 957D Soldering Station, you can easily rework your boards and get your project back on track. Its also possible to use solder paste (in a syringe for...

$97.50

1 IN STOCK

Hakko Soldering Tip: T18-C2 Hoof - For Lead or Lead-Free Use

PRODUCT ID: 1248

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits...

$7.95

48 IN STOCK

Panavise Multi-Purpose Work Center - PV-350

PRODUCT ID: 2452

The Panavise Multi-Purpose Work Center is a versatile combination designed for holding larger, heavier objects. Very stable. An exceptional...

The Panavise Multi-Purpose Work Center is a versatile combination designed for holding larger, heavier objects. Very stable. An exceptional choice for any workbench! Self-centering, extra-wide opening jaws open a full 9" (228.6mm) and hold heavier objects by centering weight over base Parts Tray Base Mount adds stability [8.5" (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools. Includes six...

$99.95

23 IN STOCK

Pomona Minigrabber Test Clip Kit - Multi-Color Pack of 10 - POM-5522

PRODUCT ID: 2617

The highest quality test clips in the world! These Pomona Minigrabber Test Clips will last you years, if not decades. Use these to make your...

The highest quality test clips in the world! These Pomona Minigrabber Test Clips will last you years, if not decades. Use these to make your very own test cables and jigs. Push down on the end to extend the grabber clip. When 'grabbing', the plastic shround helps avoid shorting, a common annoyance with alligator clips. The Minigrabber-sized clips are a great way to test and connect without soldering, these clips are best for...

$21.95

73 IN STOCK

Chip Quik Tack Flux 10cc Syringe with Plunger and Tip - SMD291

PRODUCT ID: 2667

The Chipquik Tack Flux 10cc Syringe is ideal for all rework, solder, de-solder, and reflow applications! The tack flux is non-corosive,...

The Chipquik Tack Flux 10cc Syringe is ideal for all rework, solder, de-solder, and reflow applications! The tack flux is non-corosive, non-conductive, no-clean and it won't run all over your PCB when applied. In our GIF demo we used the syringe to apply the tack flux on an Adafruit Metro and then used a Chipquik SMD Removal Kit for the rest! Flux Type: Synthetic No-Clean (for Leaded and Lead-Free applications) Flux Classification: REL0 ...

$15.95

47 IN STOCK

Professional IC Extraction Tool

PRODUCT ID: 1598

You take your soldering seriously, so you deserve a serious IC extractor tool. We purposefully never carried the cheap bent-sheet IC extractors, and...

You take your soldering seriously, so you deserve a serious IC extractor tool. We purposefully never carried the cheap bent-sheet IC extractors, and if you've ever used one you know why. They should call them "IC try-to-extract-but-end-up-bending-half-the-pins-ors" and even with a lot of experience they're just a pain. The Japanese made IC extractor is an exception, it's got ground tips that can wedge in there to lift the...

$14.95

27 IN STOCK

Mini Work Tool

PRODUCT ID: 1425

A little tool-box in your wallet - good for every-day use, travel, or when you're on a camping trip. Handy credit card sized multitool packed...

A little tool-box in your wallet - good for every-day use, travel, or when you're on a camping trip. Handy credit card sized multitool packed with useful features. Comes with 11 tools: Can Opener Knife Edge Screwdriver Ruler Cap opener 4 Position wrench Butterfly screw wrench Saw blade Direction ancillary indication 2 Position wrench Lanyard/key chain hole Made from high quality stainless steel. Comes with a leatherette protection sleeve....

$4.95

71 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 24" - Red

PRODUCT ID: 2607

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

17 IN STOCK

Universal Micro Crimping Pliers - 1.0 to 1.9mm Size Contacts - PA-09

PRODUCT ID: 350

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro,...

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro, no more painful struggles with pliers and generic crimpers that smoosh your contacts so they wont fit properly. This model will work best for smaller common connectors, from 1.0 to 1.9mm / AWG #32-20 - all those frighteningly small contacts used in fine pitch connectors. There's a great website...

$49.95

92 IN STOCK

FriedCircuits USB Tester v2.0

PRODUCT ID: 1456

USB has become the core of many projects, but it's troublesome to test USB voltage levels and current usage using a breadboard. Some people try...

USB has become the core of many projects, but it's troublesome to test USB voltage levels and current usage using a breadboard. Some people try to splice cables and alligator clip onto frayed ends, but it's difficult to get solid readings. This USB Tester will make it much easier to monitor any USB project's power source. As part of the USB spec, ports are limited to 500mA, so you want to monitor how close you are. Most people use...

$11.95

66 IN STOCK

Articulated Arm Stand for USB Microscope

PRODUCT ID: 969

We love pulling out our 5 Megapixel USB microscope for inspecting PCBs once in a while, but we really got to use it every day when we picked up this...

We love pulling out our 5 Megapixel USB microscope for inspecting PCBs once in a while, but we really got to use it every day when we picked up this beautiful machined aluminum 3D stand. It has multiple articulated 'joints' for positioning the microscope in any way and is very sturdy and solid with a large flat base. A single hand-friendly knob is used to loosen all the joints for positioning, then tighten it up to fix the position. The...

$49.95

15 IN STOCK

Carbide Square End Mill - 1/8" Shaft - 0.5mm Diameter

PRODUCT ID: 2072

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC...

$3.95

51 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 24" - Black

PRODUCT ID: 2606

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

65 IN STOCK

Professional Non-Slip Magnetic Project Mat

PRODUCT ID: 1636

Repairs can be tough. You don't need missing screws making it worse. iFixit designed this mat to make repairs easier. You won’t lose screws...

Repairs can be tough. You don't need missing screws making it worse. iFixit designed this mat to make repairs easier. You won’t lose screws and won’t forget which screws go where. Magnetized to hold tight onto small screws.Dry erase surface lets you keep notes and stops mistakes.Reduces reassembly time by up to 40% while preventing errors. New! The Pro version of this mat has a better quality magnet for a strong hold and a foam...

$19.95

55 IN STOCK

Precision Torx Screwdriver Set (6 pieces)

PRODUCT ID: 452

Break seals! Void warranties! With this handy Torx driver set at your hands, all hardware you touch will open up and reveal their secret innards....

Break seals! Void warranties! With this handy Torx driver set at your hands, all hardware you touch will open up and reveal their secret innards. This set contains 6 torx drivers: T-10, T-9, T-8, T-7, T-6 and T-5. These sizes will open up pretty much any consumer electronics you come across. We picked this set to carry because the drivers have nice rubber grips and long thin shafts for getting into boxes with deeply recessed screws. The ends...

$6.95

57 IN STOCK

Pocket Autoranging Digital Multimeter

PRODUCT ID: 850

When we're on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we've found. It's so good you'll end...

When we're on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we've found. It's so good you'll end up using it as your main multimeter! First up, this meter can measure nearly everything: it's got DC and AC voltage, resistance, diode, and beeping continuity test, capacitance, and frequency. And that's not all! It's also auto-ranging, has a data-hold button and turns itself off automatically after...

$24.95

5 IN STOCK

65 Piece Ratchet Screwdriver and Tool Bit Set

PRODUCT ID: 829

Look, over there at that thing! Take it apart! You can now attack just about every kind of box or enclosure that needs undoing with this ratchet...

Look, over there at that thing! Take it apart! You can now attack just about every kind of box or enclosure that needs undoing with this ratchet screwdriver set. This set is fine quality and excels at disassembling and assembling larger hardware and makes a good companion to our smaller 38-piece set. What drew us to this tool box is its comprehensive selection of bits, the two rubber screwdriver handles (one small and one large, neither are thin...

$29.95

16 IN STOCK

Premium Digital Stainless Steel Calipers

PRODUCT ID: 1724

The most useful tool we've ever laid our hands on. These calipers are really good quality and an excellent choice if you need something better...

The most useful tool we've ever laid our hands on. These calipers are really good quality and an excellent choice if you need something better than a cheap 'disposable' pair of digital calipers but you're not quite ready for a set of high-end Mitsutoyo calipers. These digital calipers work by having a capacitive sensor instead of a rack and pinion, so they never go out of alignment even if, say, you accidentally drop them (a few...

$59.95

53 IN STOCK

Pomona Test Lead Holder - For cables up to .32" / 0 AWG diameter - Black - POM-4408

PRODUCT ID: 2625

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the black version, meant for wires up to .32" diameter or 0AWG. With these racks, all of your patch...

$11.95

12 IN STOCK

Saleae Logic 8 - 8 Channels Logic + Analog - Black

PRODUCT ID: 2512

Saleae has updated their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital...

Saleae has updated their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital signals in your electronics project, perfect for debugging protocols and communications between two chips. An oscilloscope lets you look at analog signals, good for determining what's up with your power supply, audio circuit, or sensor. With the new Logic you can now do both! This is...

$219.95

56 IN STOCK

Solder Spool - 1/4 lb SAC305 RoHS lead-free / 0.031" rosin-core - 0.25 lb / 100 g

PRODUCT ID: 734

If you want to make a kit you'll need some solder. This 1/4 lb (about 110 gram) spool is just the right amount, not too much (like 1 lb spools) and...

If you want to make a kit you'll need some solder. This 1/4 lb (about 110 gram) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). This spool of solder is 0.031" diameter, with the 'industry standard' SAC305 RoHS lead-free formulation. For flux, it contains a 'no clean' rosin core. Good for all through-hole soldering and some larger SMT soldering (especially when used with...

$24.95

24 IN STOCK

Hakko Soldering Tip: T18-D24 Screwdriver - For Lead or Lead-Free

PRODUCT ID: 1286

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits...

$7.95

41 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Black

PRODUCT ID: 2611

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

20 IN STOCK

Pomona Test Lead Holder - For cables up to .21" / 3 AWG diameter - Orange - POM-1508

PRODUCT ID: 2624

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the orange version, meant for wires up to .21" diameter or 3AWG. With these racks, all of your patch cords...

$14.95

36 IN STOCK

Ratcheting Crimper Pliers - #18-28 AWG

PRODUCT ID: 1213

Make cables and wiring harnesses with ease using smooth ratcheting crimpers. These precision machined crimpers will turn you into a pro, no more...

Make cables and wiring harnesses with ease using smooth ratcheting crimpers. These precision machined crimpers will turn you into a pro, no more painful struggles with pliers and generic crimpers that smoosh your contacts so they wont fit properly. Once you've pressed enough, the ratchet releases, so you know when you've applied enough force. This model will work best for smaller common connectors, from 0.1mm2-1.0mm2 / AWG #18-28 - all...

$34.95

10 IN STOCK

BitScope Micro USB

PRODUCT ID: 2053

Poke and prod your electronics with the BitScope Micro Oscilloscope and Analyzer! This micro USB powered oscilloscope by BitScope is tiny, light...

Poke and prod your electronics with the BitScope Micro Oscilloscope and Analyzer! This micro USB powered oscilloscope by BitScope is tiny, light weight, and water resistant. It's also fully user programmable and comes with a set of ten mixed signal mini-grabber test probes and a USB cable for power. The BitScope works with a full line of BitScope software for Windows, Mac OSX, Linux, and Raspberry Pi. The best part about all...

$145.00

OUT OF STOCK

Oscilloscope Probe 100MHz

PRODUCT ID: 1528

Poke and prod your electronics with a new 'scope probe. This is a classic probe, good quality and has a nice strong spring-clip and grounding...

Poke and prod your electronics with a new 'scope probe. This is a classic probe, good quality and has a nice strong spring-clip and grounding clip. Good for up to 100MHz signals, with a standard oscilloscope BNC connector. Comes as shown, the ring color on the body of the probe/connector may vary.

$14.95

11 IN STOCK

Large Double-Sided Storage Tote Box

PRODUCT ID: 1149

This tote is "totes awesome" - plenty large with lots of storage, double sided design, solid clips, clear tops and a pleasing, easy to...

This tote is "totes awesome" - plenty large with lots of storage, double sided design, solid clips, clear tops and a pleasing, easy to carry shape. We love this tote for storing all of our goodies and keeping them safe from home to the studio to the workshop. One side has little 'cups' that can be removed. The other side has the classic divider system. Outside dimensions: 13.5"x11.5"x3.25" One side contains 15...

$24.95

89 IN STOCK

Carbide Square End Mill - 1/8" Shaft - 0.7mm Diameter

PRODUCT ID: 2074

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC...

$3.95

36 IN STOCK

Chip Quik SMD Removal Kit - SMD1

PRODUCT ID: 2660

Removing SMD parts more complex than a resistor or SOT-23 can be a real bear. You want to get the part off without damaging traces, and if possible,...

Removing SMD parts more complex than a resistor or SOT-23 can be a real bear. You want to get the part off without damaging traces, and if possible, without damaging the part either. You could haul out your hot air tool or you could go in surgically with this handy SMD Removal Kit from Chipquik - SMD removal is made easy! It uses a special metal alloy that bonds to your solder but stays liquid for a long time so can melt it over the...

$16.00

27 IN STOCK

Midnight hacker - Pocket electrician

PRODUCT ID: 36

The Adafruit "midnight hacker" is a Leatherman Squirt ES4 and a very handy, unique key-chain size multi-tool. The E4 sets you up with 20GA,...

The Adafruit "midnight hacker" is a Leatherman Squirt ES4 and a very handy, unique key-chain size multi-tool. The E4 sets you up with 20GA, 18GA, 16GA, 14GA and 12GA wire strippers and electrical wire cutters to handle all kinds of precise jobs. The gripping edges on the ES4's spring-action pliers help you get a firm grasp on fuses, small cables, and many hard-to-reach items. Tools: 420HC Clip Point Knife Spring-action Needlenose...

$30.00

12 IN STOCK

JTAGulator by Grand Idea Studio

PRODUCT ID: 1550

On-chip debug (OCD) interfaces can provide chip-level control of a target device and are a primary vector used by engineers, researchers, and hackers...

On-chip debug (OCD) interfaces can provide chip-level control of a target device and are a primary vector used by engineers, researchers, and hackers to extract program code or data, modify memory contents, or affect device operation on-the-fly. Depending on the complexity of the target device, manually locating available OCD connections can be a difficult and time consuming task, sometimes requiring physical destruction or modification of the...

$174.95

34 IN STOCK

Saleae Logic Pro 8 - 8 Channels Logic + Analog - Black

PRODUCT ID: 2313

Saleae has updated their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital...

$479.00

34 IN STOCK

Saleae Logic Pro 16 - 16 Channels Logic + Analog - Black

PRODUCT ID: 2431

Saleae has updated their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital...

$599.95

31 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Red

PRODUCT ID: 2605

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

20 IN STOCK

1 GS/s 50 MHz 4-channel Digital Oscilloscope - Rigol DS1054Z - Rigol DS1054Z

PRODUCT ID: 2145

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the...

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the workings of your circuits to better understand them. Difficult problems will suddenly become trivial. We tried many beginner oscilloscopes and found this one to be a perfect balance of price and function for anyone looking to to examine signals lower than 50MHz and in need of 4 channels. At...

$449.00

13 IN STOCK

Carbide Square End Mill - 1/8" Shaft - 0.6mm Diameter

PRODUCT ID: 2073

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC...

$3.95

9 IN STOCK

Autoranging Digital Multimeter Pen - MS8211D

PRODUCT ID: 1360

Chances are you spent time today poking into a circuit with two hands and then craning your neck over looking over at a multimeter display, which...

Chances are you spent time today poking into a circuit with two hands and then craning your neck over looking over at a multimeter display, which causes you to slip and lose your spot. OK well at least we had to do that, and that's when we decided it was time to pick up one of these pen-style digital multimeters. It's small and light but has a full featured multimeter inside. The ground probe is actually a wired clamp (it has a nice...

$34.95

6 IN STOCK

Mitutoyo - Absolute Digimatic Digital Calipers, 6 in. - 500-196-30

PRODUCT ID: 294

The most useful tool we've ever laid our hands on. We thought we'd use them just for electronics but then we got our hands on these...

The most useful tool we've ever laid our hands on. We thought we'd use them just for electronics but then we got our hands on these calipers and had so much fun we started measuring everything. They're indestructible - which is good because we don't know what we'd do without them - and ultra precise which is super helpful when measuring components or when trying to decide what diameter blueberry you prefer the...

$155.00

9 IN STOCK

Aluminum MacBook Air 4 1.2mm 5-Point Star/Pentalobe Screwdriver

PRODUCT ID: 889

We tried half a dozen different 5-point star/"pentalobe" screwdriver tools to find the one we liked the most The body is made from a single...

We tried half a dozen different 5-point star/"pentalobe" screwdriver tools to find the one we liked the most The body is made from a single piece of aluminum and has nice knurled grips. The end-cap rotates so you can keep the body steady while rotating. The tip is nicely machined and is magnetic so it holds the miniscule screws in place while inserting/removing them Pentalobe 1.2mm screws are used in MacBook Air cases. Check your Air...

$9.95

16 IN STOCK

Saleae Logic 4 - 4 Channels Logic / 1 Channel Analog - Black

PRODUCT ID: 2312

Saleae has update their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital...

Saleae has update their popular Logic analyzer series to now include analog capabilities. A logic analyzer is a device that lets you watch digital signals in your electronics project, perfect for debugging protocols and communications between two chips. An oscilloscope lets you look at analog signals, good for determining what's up with your power supply, audio circuit, or sensor. With the new Logic you can now do both! This is...

$109.00

2 IN STOCK

Triple Output 195 Watt Power Supply - 30V, 30V, 5V @ 3A - DP832

PRODUCT ID: 2014

Stop noodling around with an LM317 and wall wart - you can wield all the power with the DP832 Triple Output 195 Watt Power Supply! If you're...

Stop noodling around with an LM317 and wall wart - you can wield all the power with the DP832 Triple Output 195 Watt Power Supply! If you're doing any kind of electronics past Arduino-type hacking, you've probably been in a position where you need reliable power and the ability to source, analyze, and coordinate it to best suit your needs. A motor that wants 12V @ 2A? 5V @ 3A? Current-limited power for testing out high-watt...

$495.95

OUT OF STOCK

Precision screw removal pliers - PZ-57

PRODUCT ID: 396

If you've ever had to remove a stripped bolt or screw, you know how incredibly frustrating it can be. Normal pliers slip when trying to grip onto...

If you've ever had to remove a stripped bolt or screw, you know how incredibly frustrating it can be. Normal pliers slip when trying to grip onto the screw head. Unless you're careful, you can easily make the problem worse, requiring you to drill out the screw (a dangerous proposition) That's where these precision screw removal pliers come in. The end is concave and extra-grippy so you can grasp the bolt head and tug on it. It's...

$28.00

20 IN STOCK

Aluminum USB Microscope with Precision Stand

PRODUCT ID: 1061

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and...

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a high quality 640x480 camera sensor inside and an optical magnifier that can adjust from 20x (for basic PCB inspection) to 200x (for detailed inspection). Eight mini white LEDs are angled right onto...

$149.95

9 IN STOCK

Pomona Test Lead Holder - For cables up to .45" 4/0 AWG diameter - Blue - POM-2708

PRODUCT ID: 2623

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the blue version, meant for wires up to .45" diameter or 4/0AWG. With these racks, all of your patch cords...

$14.95

22 IN STOCK

Beagle USB 12 - Low/Full Speed USB Protocol Analyzer + Sticker

PRODUCT ID: 708

USB complexity got you down? Need a hand with enumeration? Reverse engineering a USB device? You will fall in love with the Beagle 12 USB Analyzer....

USB complexity got you down? Need a hand with enumeration? Reverse engineering a USB device? You will fall in love with the Beagle 12 USB Analyzer. This hardware analyzer is completely non-intrusive, and is much better than flaky software analyzers. Perfect for when a problem is bad enough it crashes the USB host, or for real time data capture analysis. We used the big-sister version (the Beagle 480) for our famous Open Kinect...

$399.95

9 IN STOCK

Chip Quik SMD Removal Kit with Lead-Free Alloy - SMD1NL

PRODUCT ID: 2668

Removing SMD parts more complex than a resistor or SOT-23 can be a real bear. You want to get the part off without damaging traces, and if possible,...

$17.00

7 IN STOCK

1 GS/s 100MHz Digital Storage Oscilloscope + Extras - DS1102E - DS1102E

PRODUCT ID: 1987

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the...

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the workings of your circuits to better understand them. Difficult problems will suddenly become trivial. We tried many beginner oscilloscopes and found this one to be a perfect balance of price and function: it's perfect as a 'first scope' or as a hacker-space resource to share. To learn...

$449.95

1 IN STOCK

Universal Crimping Pliers - 1.6 to 2.5mm Size Contacts - PA-21

PRODUCT ID: 349

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro,...

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro, no more painful struggles with pliers and generic crimpers that smoosh your contacts so they wont fit properly. This model does a wide range of the most common connectors, from 1.6 to 2.5mm / AWG #26-18 There's a great website at ENGINEER Co. with lots of details. There is also a video tutorial...

$49.95

10 IN STOCK

Messograf Pen Calipers

PRODUCT ID: 810

Caliper rule? Tire tread gauge? Ruler? Thread scale? Writing instrument? The Messograf is all of these in one. It is a multipurpose instrument,...

Caliper rule? Tire tread gauge? Ruler? Thread scale? Writing instrument? The Messograf is all of these in one. It is a multipurpose instrument, constructed of chromium-plated brass for those who demand more than just the joy of writing. Many have tried to copy it - none have succeeded. This is the original. This retractable ballpoint pen has a large ink cartridge. Made in Germany.

$27.50

62 IN STOCK

PM51A - Amprobe Pocket Autoranging Digital Multimeter

PRODUCT ID: 2615

The ultimate shirt-pocket sized Pocket Digital Multimeter from Amprobe with frequency & capacitance measurements! This DMM is only...

The ultimate shirt-pocket sized Pocket Digital Multimeter from Amprobe with frequency & capacitance measurements! This DMM is only 3/8” thick and weighs less than 3 oz. With full functionality offering AC and DC voltage to 600 V, resistance to 40 Megohm, capacitance to 3000 μF, frequency to 1 MHz, continuity w/beeper, and diode test. So handy, it's Ladyada's daily multimeter Fully autoranging, this meter offers seven...

$39.95

11 IN STOCK

TV Microscope - 25x & 400x magnification / 8 LEDs

PRODUCT ID: 1345

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little TV-output microscope is the perfect tool. It's smaller and...

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little TV-output microscope is the perfect tool. It's smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 1.3 megapixel sensor inside and an optical magnifier that can adjust to about 25x (for basic PCB inspection) or 400x (for detailed inspection). Eight white LEDs are angled right onto whatever you're...

$69.95

9 IN STOCK

1 GS/s 50MHz Digital Storage Oscilloscope - Rigol DS1052E - Rigol DS1052E

PRODUCT ID: 681

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the...

The ultimate debugging tool for electronics, this oscilloscope will turn you into a "Circuit Whisperer". You will be able to peer into the workings of your circuits to better understand them. Difficult problems will suddenly become trivial. We tried many beginner oscilloscopes and found this one to be a perfect balance of price and function: it's perfect as a 'first scope' or as a hacker-space resource to share. To learn...

$394.95

1 IN STOCK

Leatherman Tread - Stainless Steel

PRODUCT ID: 3011

Carry up to 29 tools anywhere you go with this travel friendly wearable multi-tool; the Leatherman Tread . This is the Stainless Steel version, we...

Carry up to 29 tools anywhere you go with this travel friendly wearable multi-tool; the Leatherman Tread . This is the Stainless Steel version, we also have it in black steel. Ultimate wearability and modern style. The customizable Leatherman Tread goes everywhere you do, it follows TSA specifications for taking on an airplane so it can stay on you when you travel. Roll up your sleeve and get to it with the multi-tool that’s always on...

$165.00

OUT OF STOCK

Aluminum iPhone 4S 0.8mm 5-Point Star/Pentalobe Screwdriver

PRODUCT ID: 888

We tried half a dozen different 5-point star/"pentalobe" screwdriver tools to find the one we liked the most The body is made from a single...

We tried half a dozen different 5-point star/"pentalobe" screwdriver tools to find the one we liked the most The body is made from a single piece of aluminum and has nice knurled grips. The end-cap rotates so you can keep the body steady while rotating. The tip is nicely machined and is magnetic so it holds the miniscule screws in place while inserting/removing them. Pentalobe 0.8mm screws are used in iPhone 4S (not iPhone 4). Check...

$9.95

4 IN STOCK

WiFi Portable Microscope - Usable With Android/iPad/iPhone

PRODUCT ID: 1276

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and...

As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a high quality 640x480 camera sensor inside and an optical magnifier that can adjust from 5x (for basic PCB inspection) to 200x (for detailed inspection). Eight mini white LEDs are angled right onto...

$199.95

1 IN STOCK

Leatherman Tread - Black Steel

PRODUCT ID: 3012

Carry up to 29 tools anywhere you go with this travel friendly wearable multi-tool; the Leatherman Tread . This is the Black Steel version, we also...

Carry up to 29 tools anywhere you go with this travel friendly wearable multi-tool; the Leatherman Tread . This is the Black Steel version, we also have it in stainless steel. Ultimate wearability and modern style. The customizable Leatherman Tread goes everywhere you do, it follows TSA specifications for taking on an airplane so it can stay on you when you travel. Roll up your sleeve and get to it with the multi-tool that’s always on and...

$220.00

2 IN STOCK

Fluke 87V Industrial Multimeter

PRODUCT ID: 2610

You want the best multimeter in the world? OK, we got this! The Fluke 87V combo kit is built around the Fluke 87V in glorious Fluke Yellow. It's...

You want the best multimeter in the world? OK, we got this! The Fluke 87V combo kit is built around the Fluke 87V in glorious Fluke Yellow. It's the most well-known, best-trusted & widely used industrial digital multimeter in the world, and includes special accessories to make you even more productive on the job. Adafruit has always coveted a Fluke meter and now we're an authorized distributor! The 87V is the best meter you can get...

$449.95

OUT OF STOCK

Aluminum iPhone 4 Phillips #000 / PH000 Screwdriver

PRODUCT ID: 890

We tried half a dozen different precision Phillips #000 screwdriver tools to find the one we liked the most. The body is made from a single piece of...

We tried half a dozen different precision Phillips #000 screwdriver tools to find the one we liked the most. The body is made from a single piece of aluminum and has nice knurled grips. The end-cap rotates so you can keep the body steady while rotating. The tip is nicely machined and is magnetic so it holds the miniscule screws in place while inserting/removing them. These small Phillips screws are used in iPhone 4G (not 4S) and nearly every...

$9.95

6 IN STOCK

Black Nylon Screw and Stand-off Set – M2.5 Thread

PRODUCT ID: 3299

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works great with Feathers, Adafruit breakout boards, Pi HATs and plates, and more! Since they are nylon you can file them down easily,...

$16.95

OUT OF STOCK

FIDO U2F Security Key - U2F USB Two Step Authentication Security

PRODUCT ID: 3363

It's never been more important to add two-factor authentication to your online accounts. Two-factor adds another layer of protection in case your...

It's never been more important to add two-factor authentication to your online accounts. Two-factor adds another layer of protection in case your password is stolen or hacked, by relying on a physical thing you own. Normally this is done with a cell phone, where you get an SMS or phone call. But maybe you're tired of hauling out your phone every time you log in to your GMail or GitHub account? That's where physical USB tokens can...

$9.95

OUT OF STOCK

Adafruit Pocket Screwdriver - Black

PRODUCT ID: 3284

Have you ever been in a situation where you desperately needed a screwdriver right away ? Now you can have one at-the-ready all the time...

Have you ever been in a situation where you desperately needed a screwdriver right away ? Now you can have one at-the-ready all the time — enter the Adafruit Pocket Screwdriver ! OK, it's a little tough to write exciting copy for a pocket screwdriver, but really this one is truly great for Adafruit customers. The Phillips head fits the 3.5mm terminal blocks we have on many of our kits, and the slot is great for the common...

$1.50

IN STOCK

Makedo Toolkit for Cardboard Construction

PRODUCT ID: 3285

Looking for something for the little engineer in your life? The Makedo Toolkit is a starter kit of cardboard construction tools that's a...

Looking for something for the little engineer in your life? The Makedo Toolkit is a starter kit of cardboard construction tools that's a great introduction to Makedo. Enter into the world of playful cardboard construction and build small creations with 30 reusable parts. Rocket ships, cars, dinosaurs, a knight in cardboard armor – build whatever you can imagine with these handy little tools. Grab some cardboard and get...

$12.50

IN STOCK

Maker Paste Lead-Free Prototyping Solder Paste

PRODUCT ID: 3217

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no...

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyping Solder Paste from IC Breakout will provide strong, flux-aided conductive bonds for your board. Since it’s premixed, all you need to do is cut off the tip to your desired opening (start small), squeeze the paste onto...

$5.95

IN STOCK

Stickvise PCB Vise

PRODUCT ID: 3197

Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need! In performing the...

Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need! In performing the simple task of holding a PCB near table level, the Stickvise is great because your hands can rest directly on the table, allowing you to steady yourself with minimal effort for fine soldering and probing. The Stickvise also fits easily under a microscope and keeps PCBs...

$29.95

72 IN STOCK

Stickvise High Temperature PTFE Jaws (pair)

PRODUCT ID: 3198

Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These...

Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These High-Temperature PTFE Jaws are a great hack for your PCB Stickvise, keeping your board safe from incineration. Made from Teflon, their main advantage is high temperature resistance. You can take a hot soldering iron and touch it directly to the jaw plates without leaving a mark. Neat! Or should...

$14.95

IN STOCK

Mini Hand from Hobby Creek with Two Arms

PRODUCT ID: 2740

Turns out the Super Fancy Third Hand Kit has a little helper - say hello to The Mini Hand from Hobby Creek ! The Mini Hand is affordable and...

Turns out the Super Fancy Third Hand Kit has a little helper - say hello to The Mini Hand from Hobby Creek ! The Mini Hand is affordable and versatile - making it a great addition to your work station. You can feel the quality of the Mini Hand just by holding it. The base is machined from aluminum and anodized for a nice finish. The two 12" arms with large alligator clips allow for balance and holding power. The Mini Hand comes fully...

$29.95

46 IN STOCK

Hakko FX-600 50-Watt Adjustable Soldering Iron

PRODUCT ID: 3037

Upgrade your RatShack fire-starter iron to this luxurious portable soldering iron. It's durable, with a strong grounded cord, a nice handle and...

Upgrade your RatShack fire-starter iron to this luxurious portable soldering iron. It's durable, with a strong grounded cord, a nice handle and fast heat up. When you don't need a full soldering 'station' this pen type iron will fulfill your needs. At 50W it can handle any task you throw at it, and the lovely adjustable knob on the side lets you set the temperature so you get just the right temperature for your lead or lead free...

$44.95

DISCONTINUED

Lockitron Motorized Door Lock Body

PRODUCT ID: 2579

Build your own smart lock with the Lockitron motorized door lock enclosure! Normally, a Lockitron has a built-in WiFi system for locking &...

Build your own smart lock with the Lockitron motorized door lock enclosure! Normally, a Lockitron has a built-in WiFi system for locking & unlocking via their App. Since they have redesigned their enclosure, we now have the 'guts' of the Lockitron available for hacking. There's just enough space inside for some tasty Adafruit electronics You get the housing for the original Lockitron, which contains a geared down DC motor, the...

$44.95

DISCONTINUED

Panavise ActionGrip 3-N-1 Camera Mount

PRODUCT ID: 2079

Be the Mikhail Kalatozov of GoPro with this 3-N-1 ActionGrip Suction Cup Camera Mount Kit! This kit has enough flexibility to give you three...

Be the Mikhail Kalatozov of GoPro with this 3-N-1 ActionGrip Suction Cup Camera Mount Kit! This kit has enough flexibility to give you three different camera mounts - one for low profile mounting, one for full range of motion, and one for maximum adjustability. It's the kind of all-in-one tool that can give your footage a unique perspective with a variety of interesting angles. The ActionGrip also comes with a super powerful suction...

$44.95

DISCONTINUED

Octopart Pocket Electronics Reference PCB

PRODUCT ID: 1797

It's like Circuit Playground for your wallet! Designed by Star Simpson, MIT Engineer! This handy, credit-card sized PCB is the perfect accessory...

It's like Circuit Playground for your wallet! Designed by Star Simpson, MIT Engineer! This handy, credit-card sized PCB is the perfect accessory for the amateur electrical engineer. On one side it has a beautiful eight-color silk screened resistor chart to help you identify resistors by their color (and finally beat Mho's Resistance) and on the other there's a comprehensive SMT reference with to-scale footprints for common SMT parts....

$9.00

DISCONTINUED

Saleae Logic 16 - 16-Channel USB Logic Analyzer

PRODUCT ID: 733

A logic analyzer is a device that lets you watch digital signals in your electronics project. Unlike an oscilloscope, its not good for measuring...

A logic analyzer is a device that lets you watch digital signals in your electronics project. Unlike an oscilloscope, its not good for measuring analog signals - but also unlike an oscilloscope, you can track 16 signals at time! So its a good complementary tool. This logic analyzer plugs into a computer and has easy to use cross-platform software. This makes it small, portable and inexpensive. If you ever have to to debug SPI, i2c, serial, CAN,...

$294.95

DISCONTINUED

EEVblog uCurrent - Precision nA Current Measurement Assistant - v3

PRODUCT ID: 882

An essential companion when working on a ultra-low-power projects! If you've ever used a portable multimeter (even your $300 Fluke!) to measure...

An essential companion when working on a ultra-low-power projects! If you've ever used a portable multimeter (even your $300 Fluke!) to measure sub-uA currents - say for a low power microcontroller or sensor project - you may notice that you're not getting the precision you expect, or that your project is acting finicky. How is this possible? – It’s called Burden Voltage. Many people are aware of Burden Voltage, but few...

$59.95

DISCONTINUED

Universal Crimping Pliers - 1.6 to 2.3mm Size Contacts - PA-20

PRODUCT ID: 2189

Make cables and wiring harnesses with ease using our favorite crimping pliers. These precision machined crimpers will turn you into a pro...

Make cables and wiring harnesses with ease using our favorite crimping pliers. These precision machined crimpers will turn you into a pro — no more painful struggles with pliers and generic crimpers that smoosh your contacts so they wont fit properly. This model is a little bigger than our PA-09 pliers and can crimp 2.5 to 5mm pitch connector pins. The dies range from 1.6mm to 2.3mm. There's a great...

$49.95

DISCONTINUED

HexBright FLEX

PRODUCT ID: 1725

The HexBright FLEX is the world's first open source, Arduino compatible, rechargeable LED light. Features include a high quality CNC aluminum...

The HexBright FLEX is the world's first open source, Arduino compatible, rechargeable LED light. Features include a high quality CNC aluminum body, an ergonomic grip, a TIR lens & sealed ends. Stats for the HexBright FLEX, 500 lm model: USA Made CREE XM-L U2 Rugged All-Aluminum Construction USB Rechargeable and Programmable Regulated light output! Stays constant! High Mode - 500 Lumens/1 Hour Medium Mode - 175 Lumens/8 Hours Low Mode -...

$99.00

DISCONTINUED

Saleae Logic - 8-Channel USB Logic Analyzer

PRODUCT ID: 378

A logic analyzer is a device that lets you watch digital signals in your electronics project. Unlike an oscilloscope, its not good for measuring...

A logic analyzer is a device that lets you watch digital signals in your electronics project. Unlike an oscilloscope, its not good for measuring analog signals - but also unlike an oscilloscope, you can track 8 signals at time! So its a good complementary tool. This logic analyzer plugs into a computer and has easy to use, cross-platform software. This makes it small, portable and inexpensive. If you ever have to to debug SPI, i2c, serial, CAN,...

$149.50

DISCONTINUED

Toool Emergency Lock-Pick Card

PRODUCT ID: 788

Some people say "a college education opens doors" but for thousands of dollars less you can open any door you wish using this ever-handy...

Some people say "a college education opens doors" but for thousands of dollars less you can open any door you wish using this ever-handy emergency pick card. Designed and produced by The Open Organisation Of Lockpickers, this ISO-compliant wallet-sized card can be kept easily on your person without hassle or fuss, but should the need arise for picks in a pinch, simply snap the card apart and you have a nine-piece toolkit at your...

$34.95

DISCONTINUED

Magnetic Project Mat

PRODUCT ID: 1007

Repairs can be tough. You don't need missing screws making it worse. iFixit designed this mat to make repairs easier. You won’t lose screws...

Repairs can be tough. You don't need missing screws making it worse. iFixit designed this mat to make repairs easier. You won’t lose screws and won’t forget which screws go where. Magnetized to hold tight onto small screws. Dry erase surface lets you keep notes and stops mistakes. Reduces reassembly time by up to 40% while preventing errors. Magnetic surface is safe for hard drives, and other modern electronics. Anyone who has...

$12.95

DISCONTINUED

Sugru - multicolor pack

PRODUCT ID: 436

Sugru! Soft-touch silicone rubber that molds and sets permanently. Sticks to aluminum, steel, ceramics, glass, wood and some fabrics + plastics!...

$21.95

DISCONTINUED

Genuine Hakko FX-888 (936 upgrade) - FX-888

PRODUCT ID: 303

Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888. We worked hard to get the best and a...

Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888. We worked hard to get the best and a great price, these are not cheap knock-offs. This iron is an upgrade to the venerable Hakko 936 - smaller footprint but more powerful for a faster heat up time. The Hakkos have quality construction, this iron is the last one you'll need for decades. Heats up in 30 seconds, with a calibrated...

$95.00

DISCONTINUED

IC hook set (9 pcs)

PRODUCT ID: 401

When alligator clips and even scope probes are too large, IC hooks come to the rescue! These fine clips are very nice, and come in a set of 9 colors...

When alligator clips and even scope probes are too large, IC hooks come to the rescue! These fine clips are very nice, and come in a set of 9 colors (black, brown, red, orange, yellow, green, blue, violet, gray). They provide a nice strong grip on SOICs, TQFPs, anything with 0.6mm pin pitch or larger. The hook is made of strong gold-plated 'piano wire', and there are angle connectors so that you can slip these onto your Saleae Logic...

$19.95

DISCONTINUED