1.8" Color TFT LCD display with MicroSD Card Breakout - ST7735R

PRODUCT ID: 358

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to...

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are...

$19.95

94 IN STOCK

Mini HDMI Plug to Standard HDMI Jack Adapter

PRODUCT ID: 2819

What an adorable little pug! Sorry - plug! What an adorable mini HDMI to HDMI plug. We find this plug adapter really helpful....

What an adorable little pug! Sorry - plug! What an adorable mini HDMI to HDMI plug. We find this plug adapter really helpful. It's a great way to convert any mini HDMI plug to a normal HDMI plug and...that's about it! Now you can use any of your classic HDMI cables. Simple. Useful. Adorable. Note: This product may come in black or white. They are functionally the same. We cannot control...

$2.95

IN STOCK

TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers

PRODUCT ID: 3315

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen...

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display comes with a...

$29.95

82 IN STOCK

Medium 16x32 RGB LED matrix panel

PRODUCT ID: 420

Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in...

Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 512 bright RGB LEDs arranged in a 16x32 grid on the front. On the back there is a PCB with two IDC...

$24.95

IN STOCK

Monochrome 1.3" 128x64 OLED graphic display

PRODUCT ID: 938

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of...

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its...

$19.95

IN STOCK

2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

PRODUCT ID: 2090

Add some jazz & pizazz to your project with a color capactive touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED...

Add some jazz & pizazz to your project with a color capactive touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a capacitive single-touch touchscreen attached to it already, so you can detect finger presses anywhere on the screen. (We also...

$39.95

OUT OF STOCK

i2c / SPI character LCD backpack

PRODUCT ID: 292

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to...

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. We've written tutorials on using character LCDs with an Arduino (or similar microcontroller) but find that the number of pins necessary to control the LCD can be restrictive, especially with ambitious projects....

$9.95

IN STOCK

Mini HDMI to HDMI Cable - 5 feet

PRODUCT ID: 2775

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy...

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long (about 5 feet). Perfect for use with your new Raspberry Pi Zero!

$5.95

OUT OF STOCK

TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch

PRODUCT ID: 2219

It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding...

It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch screen driver. The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not...

$29.95

4 IN STOCK

Standard LCD 16x2 + extras - white on blue

PRODUCT ID: 181

Standard HD44780 LCDs are useful for creating standalone projects. 16 characters wide, 2 rows White text on blue background Connection port is 0.1"...

Standard HD44780 LCDs are useful for creating standalone projects. 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Pins are documented on the back of the LCD to assist in wiring it up Single LED backlight included can be dimmed easily with a resistor or PWM and uses much less power than LCD with EL (electroluminescent) backlights Can be fully controlled with...

$9.95

IN STOCK

3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket - HXD8357D

PRODUCT ID: 2050

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight)...

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This...

$39.95

99 IN STOCK

HDMI 7" 800x480 Display Backpack - With Touchscreen

PRODUCT ID: 2407

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI...

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play. The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP...

$89.95

IN STOCK

2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341

PRODUCT ID: 1770

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight)...

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. We also have a version of this...

$29.95

IN STOCK

RGB backlight positive LCD 16x2 + extras - black on RGB

PRODUCT ID: 398

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full color...

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full color RGB-backlight background! That means you can change the background color to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse, or just leave it off for a neutral background. This LCD is the most daylight readable character LCD we have and is very beautiful...

$12.95

IN STOCK

Monochrome 128x32 I2C OLED graphic display

PRODUCT ID: 931

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its...

$17.50

IN STOCK

Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout - ST7735R

PRODUCT ID: 2088

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to...

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.44" display has 128x128 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and...

$14.95

OUT OF STOCK

Standard LCD 20x4 + extras - white on blue

PRODUCT ID: 198

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is...

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Single LED backlight with a resistor included, you can power it directly from 5V. If it's too bright for you, it can be dimmed easily with a resistor or PWM and uses much less power than LCD with EL (electroluminescent) backlights Can be...

$17.95

IN STOCK

USB + Serial Backpack Kit with 16x2 RGB backlight positive LCD - Black on RGB

PRODUCT ID: 782

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed...

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB sits on the back of our 'standard' character LCD (16x2 or 20x4 sized) and does everything you could want: printing text, automatic scrolling, setting the backlight, adjusting contrast, making custom characters, turning on and off the cursor, etc. It can even handle our RGB backlight LCDs...

$24.95

49 IN STOCK

HDMI 5" Display Backpack - Without Touch

PRODUCT ID: 2232

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it...

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play. The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! The 5"...

$59.95

IN STOCK

OLED Breakout Board - 16-bit Color 1.5" w/microSD holder

PRODUCT ID: 1431

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our big 1.5" color OLED displays are...

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our big 1.5" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.5" diagonal and contains 128x128 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be set with 16-bits of resolution for a large range of colors. Because...

$39.95

IN STOCK

Assembled Standard LCD 16x2 + extras - White on Blue

PRODUCT ID: 1447

Standard HD44780 LCDs are useful for creating standalone projects. This product is similar to our Standard LCD 16x2 display but comes with the...

Standard HD44780 LCDs are useful for creating standalone projects. This product is similar to our Standard LCD 16x2 display but comes with the header soldered on! 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Pins are documented on the back of the LCD to assist in wiring it up Single LED backlight included can be dimmed easily with a resistor or PWM and...

$10.95

IN STOCK

Monochrome 0.96" 128x64 OLED graphic display

PRODUCT ID: 326

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64...

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its...

$19.50

55 IN STOCK

HDMI 5" 800x480 Display Backpack - With Touchscreen

PRODUCT ID: 2260

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI...

$74.95

IN STOCK

NTSC/PAL (Television) TFT Display - 3.5" Diagonal

PRODUCT ID: 913

Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board....

Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red (+) and black (-) wires, then connect a composite video source to the RCA connectors. Voila, a television display! There's three little buttons that let you enter a menu system for adjusting brightness, color and contrast. The...

$44.95

100 IN STOCK

Monochrome 128x32 SPI OLED graphic display

PRODUCT ID: 661

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32...

$17.50

50 IN STOCK

Nokia 5110/3310 monochrome LCD + extras

PRODUCT ID: 338

These displays were used in old Nokia 5110/3310 cell phones (before the smart-phone fad turned every cell phone into a TV). It's a 84x48...

These displays were used in old Nokia 5110/3310 cell phones (before the smart-phone fad turned every cell phone into a TV). It's a 84x48 pixel monochrome LCD display. These displays are small, only about 1.5" diagonal, but very readable and come with a white backlight. This display is made of 84x48 individual pixels, so you can use it for graphics, text or bitmaps. These displays are inexpensive, easy to use, require only a few...

$10.00

IN STOCK

TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - Without Touch

PRODUCT ID: 2218

It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding...

$24.95

62 IN STOCK

16x24 Red LED Matrix Panel - Chainable HT1632C Driver

PRODUCT ID: 555

These LED panels take care of all the work of making a big matrix display. Each panel has six 8x8 red matrix modules, for a 16x24 matrix. The panel...

These LED panels take care of all the work of making a big matrix display. Each panel has six 8x8 red matrix modules, for a 16x24 matrix. The panel has a HT1632C chip on the back with does all the multiplexing work for you and has a 3-pin SPI-like serial interface to talk to it and set LEDs on or off (you cannot set the LED to be individually dimmed, as in 'grayscale'). There's a few extras as well, such as being able to change the...

$24.95

IN STOCK

Adafruit USB + Serial LCD Backpack Add-On with Cable

PRODUCT ID: 781

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed...

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed PCB can connect to the back of any 16x2 or 20x4 character LCD and does everything you could want: printing text, automatic scrolling, setting the backlight, adjusting contrast, making custom characters, turning on and off the cursor, etc. It can even handle our RGB backlight LCDs with full 8-bit PWM...

$12.95

49 IN STOCK

1.8" SPI TFT display, 160x128 18-bit color - ST7735R driver

PRODUCT ID: 618

We just love this little 1.8" TFT display, with true TFT color (up to 18-bits per pixel!), fine 160x128 resolution, two white LED backlight that...

We just love this little 1.8" TFT display, with true TFT color (up to 18-bits per pixel!), fine 160x128 resolution, two white LED backlight that runs on 3.3V and a very easy SPI interface that requires only 4 or 5 digital pins to send pixels to the display. Please note! This is just the raw display, not attached to a PCB or for use with a breadboard. If you want to use this out of the box with no surface mount soldering, check out our fully...

$9.95

99 IN STOCK

RGB backlight negative LCD 20x4 + extras - RGB on black

PRODUCT ID: 498

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a...

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in person One nice thing about these LCDs is that they are an elegant upgrade, but you can use...

$24.95

6 IN STOCK

32x32 RGB LED Matrix Panel - 4mm Pitch

PRODUCT ID: 607

Bring a little bit of Times Square into your home with this totally adorable 5 inch square 32 x 32 RGB LED matrix panel. These panels are normally...

Bring a little bit of Times Square into your home with this totally adorable 5 inch square 32 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 1024 bright RGB LEDs arranged in a 32x32 grid on the front with 4mm...

$49.95

41 IN STOCK

SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

PRODUCT ID: 1393

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the...

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a matt silver background, and pixels show up as little mirrors for a silver-reflective display, a really beautiful and unique look. It does not have a backlight, but it is daylight readable. For dark/night reading you may need to illuminate the LCD area with...

$39.95

IN STOCK

HDMI 7" 800x480 Display Backpack - Without Touch

PRODUCT ID: 2406

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it...

$79.95

IN STOCK

RGB backlight negative LCD 16x2 + extras - RGB on black

PRODUCT ID: 399

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a...

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in person We had these custom made to our specification so that you can use them in existing LCD...

$13.95

IN STOCK

HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1287

Yes, this is a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest,...

Yes, this is a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10" diagonal and is a 'raw' display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs....

$144.95

41 IN STOCK

5.0" 40-pin 800x480 TFT Display without Touchscreen

PRODUCT ID: 1680

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics....

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. This version does not have touchscreen attached It's exactly the same TFT...

$29.95

IN STOCK

Graphic ST7565 Positive LCD (128x64) with RGB backlight + extras - ST7565

PRODUCT ID: 250

This graphical display looks great, costs less! The dark gray pixels are visible in daylight, and there's also a full RGB LED backlight, which...

This graphical display looks great, costs less! The dark gray pixels are visible in daylight, and there's also a full RGB LED backlight, which you can control with PWM to make any color you can imagine. Four mounting holes and a blank 11 pin 2mm-pitch labeled breakout on the side - we just soldered some wire to each hole as shown in the photos, its very easy. (The LCDs have no wires soldered in when we ship them) Bonus! We're including a...

$17.95

38 IN STOCK

5.0" 40-pin TFT Display - 800x480 with Touchscreen

PRODUCT ID: 1596

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need...

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. This version has a 4-wire...

$39.95

93 IN STOCK

USB + Serial Backpack Kit with 16x2 RGB backlight negative LCD - RGB on Black

PRODUCT ID: 784

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed...

$24.95

49 IN STOCK

Adjustable Bent-Wire Stand - up to 7" Tablets and Small Screens

PRODUCT ID: 1679

This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose...

This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & TFT holding. We use it to hold up our HDMI displays while connected to a Pi - even though it is meant for 7" we found that its fine for 5" to 10" TFTs since they're not as heavy as a tablet. You can adjust the angle and collapse it for travel. iPad mini, screen and...

$4.95

OUT OF STOCK

RA8875 Driver Board for 40-pin TFT Touch Displays - 800x480 Max

PRODUCT ID: 1590

Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480...

Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480 pixels. Then you look at your Arduino. You love your Arduino (you really do!) but there's no way it can control a display like that, one that requires 60Hz refresh and 4 MHz pixel clocking. Heck, it doesn't even have enough pins. I suppose you could move to ARM core processors with TTL display...

$34.95

79 IN STOCK

7" Display 1280x800 (720p) IPS + Speakers - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1667

Yes, this is an adorable small HDMI television with incredibly high resolution and built in 3W stereo speakers ! We tried to get the smallest...

Yes, this is an adorable small HDMI television with incredibly high resolution and built in 3W stereo speakers ! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures only 7" (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect a 9 to 12VDC adapter to the 2.1mm center-positive DC jack (not...

$169.95

IN STOCK

OLED Breakout Board - 16-bit Color 1.27" w/microSD holder

PRODUCT ID: 1673

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are...

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27" diagonal and contains 128x96 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be set with 16-bits of resolution for a large range of colors. Because the...

$34.95

7 IN STOCK

HDMI 4 Pi: 7" Display w/Touchscreen 1024x600 w/ Mini Driver

PRODUCT ID: 2396

Make a lovely, touchscreen video setup with a 7" screen at 1024x600 resolution with a resistive touchscreen overlay! For this...

Make a lovely, touchscreen video setup with a 7" screen at 1024x600 resolution with a resistive touchscreen overlay! For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal. We matched this version with a small driver board that can be powered with a USB port. The driver board only has an...

$84.95

2 IN STOCK

Qualia Bare Driver Board for LP097QX1 Display

PRODUCT ID: 1716

The Qualia Retina driver board is a work of art (it was designed by resident engineer KTOWN). It's used in the Adafruit Qualia 9.7"...

The Qualia Retina driver board is a work of art (it was designed by resident engineer KTOWN). It's used in the Adafruit Qualia 9.7" DisplayPort Monitor Kit and we use the really awesome LT3754 as a 12-channel constant current driver with individual backlight string channel control. This gives the backlight perfect consistency over any usage or temperature range. A ATtiny85 handles the backlight dimming and soft on/off, so you can PWM...

$79.95

39 IN STOCK

Adafruit 1.8" Color TFT Shield w/microSD and Joystick

PRODUCT ID: 802

This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout...

This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)! Since the display uses only 4 pins to communicate and has its own pixel-addressable frame buffer, it can be used easily to add a display & interface without...

$34.95

OUT OF STOCK

Adafruit 2.4" TFT LCD with Touchscreen Breakout w/MicroSD Socket - ILI9341

PRODUCT ID: 2478

Add some jazz & pizzazz to your project with a color touchscreen LCD. This TFT display is 2.4" diagonal with a bright (4 white-LED)...

Add some jazz & pizzazz to your project with a color touchscreen LCD. This TFT display is 2.4" diagonal with a bright (4 white-LED) backlight and it's colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. If you need a larger...

$27.50

82 IN STOCK

NTSC/PAL (Television) TFT Display - 2.0" Diagonal

PRODUCT ID: 911

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The...

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but...

$39.95

59 IN STOCK

RGB backlight positive LCD 20x4 + extras - black on RGB

PRODUCT ID: 499

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full color...

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full color RGB background! That means you can change the display background color to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in person. This LCD is the most daylight readable character LCD we have and is very beautiful and easy...

$24.95

47 IN STOCK

7.0" 40-pin TFT Display - 800x480 with Touchscreen

PRODUCT ID: 2354

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need...

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. This version has a 4-wire...

$47.50

45 IN STOCK

HDMI 4 Pi: 5" Display w/Touch and Mini Driver - 800x480 HDMI

PRODUCT ID: 2109

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. And yes it comes with...

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. And yes it comes with an equally cute little driver board and USB-enabled 40-pin to 50-pin touchscreen adapter board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. We also chose our favorite 5" touchscreen then paired it with a small USB powered driver...

$79.95

42 IN STOCK

OLED Breakout Board - 16-bit Color 0.96" w/microSD holder

PRODUCT ID: 684

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are...

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains 96x64 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be set with 16-bits of resolution for a large range of colors....

$29.95

72 IN STOCK

Resistive Touchscreen Overlay - 7" diag. 165mm x 105mm - 4 Wire

PRODUCT ID: 1676

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this...

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this glass resistive overlay over it to add a resistive touch screen. To use, first remove the protective plastic wrap from both sides. Attach to your touchscreen controller (we suggest our AR1100 USB touch adapter if you need USB mouse interface, or the STMPE610 breakout for I2C/SPI) and test to make...

$14.95

31 IN STOCK

NTSC/PAL (Television) TFT Display - 2.5" Diagonal

PRODUCT ID: 912

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board....

Yes, this is an adorable small television! The visible display measures only 2.5" (6.35cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's one little button to adjust the LED backlight brightness up and down. There is no other...

$44.95

56 IN STOCK

10.1" 1366x768 Display IPS + Speakers - HDMI/VGA/NTSC/PAL

PRODUCT ID: 2261

Yes, this is an adorable HDMI television with incredibly high resolution and built in 3.5W stereo speakers ! We tried to get the best possible...

Yes, this is an adorable HDMI television with incredibly high resolution and built in 3.5W stereo speakers ! We tried to get the best possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures 10.1" (25.7cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect a 9 to 12VDC adapter to the 2.1mm center-positive DC jack (not included)...

$189.95

35 IN STOCK

Monochrome 2.7" 128x64 OLED Graphic Display Module Kit

PRODUCT ID: 2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal,...

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is...

$49.95

36 IN STOCK

10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1694

Make a lovely audio/video setup with a 10.1" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 10.1" TFT...

Make a lovely audio/video setup with a 10.1" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10" diagonal and is a 'raw' display as is used in a tablet, ultra thin...

$154.95

9 IN STOCK

7.0" 40-pin TFT Display - 800x480 without Touchscreen

PRODUCT ID: 2353

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These...

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. This version does not have touchscreen attached It's exactly the same TFT display as PID...

$37.50

16 IN STOCK

Monochrome 2.42" 128x64 OLED Graphic Display Module Kit

PRODUCT ID: 2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42"...

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal , and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to...

$39.95

74 IN STOCK

LG LP097QX1 - iPad 3/4 Retina Display

PRODUCT ID: 1751

These are the same glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS displays you may have seen in iPad 3 or 4's. This product comes...

These are the same glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS displays you may have seen in iPad 3 or 4's. This product comes with only the brand new 9.7" diagonal TFT display module, no driver thunderbolt connector! We also sell a Qualia driver and a full kit with our Adafruit Qualia 9.7" DisplayPort Monitor Kit. This part is for advanced users, we suggest our monitor kit for most people. Exact part number and...

$99.95

10 IN STOCK

HDMI 4 Pi - 7" Display 1280x800 (720p) IPS - HDMI/VGA/PAL/NTSC

PRODUCT ID: 1033

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI/VGA display with high-res,...

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures only 7" (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video...

$159.95

31 IN STOCK

Acrylic Stand for 16x2 Character LCD

PRODUCT ID: 1365

Here is a mini-kit to get your 16x2 LCD standing up straight on your table. Made of 3mm black acrylic pieces, with 4 x 1" nylon screws & 4 x...

Here is a mini-kit to get your 16x2 LCD standing up straight on your table. Made of 3mm black acrylic pieces, with 4 x 1" nylon screws & 4 x nylon hex nuts, it goes together in a jiffy and looks super-spiffy! This product is designed specifically for our 16x2 USB/Serial backpacks. Our OLED 16x2 displays and RGB backlight positive and negative LCDs have slightly smaller screw holes so you'll have to drill them out to...

$4.95

22 IN STOCK

Blue Character OLED 16x2

PRODUCT ID: 823

When you need low power, ultra-high contrast and any-angle readability, you can't beat these great looking character OLEDs. They are pin/shape...

When you need low power, ultra-high contrast and any-angle readability, you can't beat these great looking character OLEDs. They are pin/shape compatible with 'standard' HD44780 LCDs. The code is slightly different (they're more timing sensitive) so we have our own Arduino library that plays better with the OLEDs than the standard LiquidCrystal library. Best of all, no backlight or contrast control is required, so they're...

$27.95

OUT OF STOCK

HDMI 4 Pi: 5" Display (no Touch) w/Mini Driver - 800x480 HDMI

PRODUCT ID: 1928

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the smallest display that...

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB port. The visible display measures 5" diagonal and is a 'raw' TTL display as is used in portable electronics. The driver board only has...

$59.95

OUT OF STOCK

40-pin TFT Friend - FPC Breakout with LED Backlight Driver

PRODUCT ID: 1932

This breakout board is something we designed in-house to help us work with 'dot-clock' 40-pin TFT displays that require the RGB pixel data to be...

This breakout board is something we designed in-house to help us work with 'dot-clock' 40-pin TFT displays that require the RGB pixel data to be clocked in continuously. These displays have 40-pin Flex PCB (FPC) cables and often require a boost converter for the backlight LED, which makes them annoying to breadboard. To make them breadboardable, we stuck a 40-pin FPC and a FAN5333-based backlight driver with adjustable current onto a labeled...

$9.95

13 IN STOCK

Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter

PRODUCT ID: 3305

This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please...

This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital...

$14.95

48 IN STOCK

Adjustable Bent-Wire Stand for 8-10" Tablets and Displays

PRODUCT ID: 1753

This handy bent-wire stand was originally designed to hold tablets from 8-10 inches but the rubberized design is great for general purpose...

This handy bent-wire stand was originally designed to hold tablets from 8-10 inches but the rubberized design is great for general purpose electronics & TFT holding. We use it to hold up our HDMI displays while connected to a Pi. You can adjust the angle and collapse it for travel. iPad, screen and Mho's Resistance not included :)

$4.95

52 IN STOCK

HDMI 4 Pi: 7" Display no Touchscreen 1024x600 w/ Mini Driver

PRODUCT ID: 2300

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that...

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB port. The visible display measures 7" diagonal and is a 'raw' TTL display as is used in portable electronics. The driver board only has an...

$69.95

28 IN STOCK

4.3" 40-pin TFT Display - 480x272 with Touchscreen

PRODUCT ID: 1591

This 4.3" TFT screen has lots of pixels, 480x272 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need...

This 4.3" TFT screen has lots of pixels, 480x272 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. This is a "raw...

$29.95

48 IN STOCK

Graphic KS0108 LCD 128x64 + extras - white on blue

PRODUCT ID: 188

A big, bold, beautiful blue LCD with white back-lit pixels. This LCD is the graphical upgrade to those popular 16x2 LCDs, but allows full graphical...

A big, bold, beautiful blue LCD with white back-lit pixels. This LCD is the graphical upgrade to those popular 16x2 LCDs, but allows full graphical control. Blue background with 128 x 64 'monochrome' white pixels Low power white LED back-light The LCD is driven by on-board 5V parallel interface chipset KS0108 and KS0107. They are extremely common and well documented Existing Arduino library over at the wiki use 'pin out B' PCB is...

$24.00

19 IN STOCK

2.8" TFT Display with Resistive Touchscreen

PRODUCT ID: 1774

This is a screen for advanced hackers who like the look of the TFT screen we've put into the PiTFT, TFT shield v2 and 2.8" TFT breakout....

This is a screen for advanced hackers who like the look of the TFT screen we've put into the PiTFT, TFT shield v2 and 2.8" TFT breakout. This display has 320x240 pixels and is driven with the ILI9341 chipset. This is just the display module! No PCB is included! You can talk to this chip with SPI (4 or 3 wire), 8 bit parallel, or 16 bit parallel. It also can be put into "dot clock mode" for raw TTL signal in but we have never...

$17.95

71 IN STOCK

NTSC/PAL (Television) TFT Display - 1.5" Diagonal

PRODUCT ID: 910

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The...

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but...

$39.95

13 IN STOCK

Analog panel meter - 50uA

PRODUCT ID: 252

Analog panel meters are not as blingy as LEDs but they add a touch of elegance and are easier to read quickly. This one is fairly large and is easy...

Analog panel meters are not as blingy as LEDs but they add a touch of elegance and are easier to read quickly. This one is fairly large and is easy to open up the front with two screws and replace the gauge. There's a 'zero adjust' as well. The back has four 3mm (4-40) screws, 6.5cm apart, so its easy to attach to a box or enclosure Size: 3.125" (8 cm) square, 1.25" thick (the panel is 0.5", the coil sticks out another...

$12.50

71 IN STOCK

HDMI 4 Pi 5" Display not Touchscreen 800x480 - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1678

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution ( NOT TOUCHSCREEN ). We tried to get the smallest display that would be...

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution ( NOT TOUCHSCREEN ). We tried to get the smallest display that would be good for embedded computing usage and at a good price. The visible display measures 5" diagonal and is a 'raw' TTL display as is used in portable electronics. We include a driver board with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect a 5-12V DC...

$64.95

OUT OF STOCK

HDMI 4 Pi: 7" Display w/Touchscreen 1024x600- HDMI/VGA/NTSC/PAL

PRODUCT ID: 2395

Make a lovely, touchscreen video setup with a 7" screen at 1024x600 resolution with a resistive touchscreen overlay ! For this...

Make a lovely, touchscreen video setup with a 7" screen at 1024x600 resolution with a resistive touchscreen overlay ! For this model, we tried to get an inexpensive 1024x600 touchscreen display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal. We include a driver board with HDMI, VGA and Composite inputs. We also include one of our...

$89.95

17 IN STOCK

NTSC/PAL (Television) TFT Display - 4.3" Diagonal

PRODUCT ID: 946

Yes, this is an adorable small television! The visible display measures only 4.3" (11cm) diagonal, the TFT comes with a NTSC/PAL driver board,...

Yes, this is an adorable small television! The visible display measures only 4.3" (11cm) diagonal, the TFT comes with a NTSC/PAL driver board, enclosure and stand. The display is very easy to use - simply connect 12VDC to the 2.1mm center-positive DC jack (or use the cable and connect to the red and black wires), then connect a composite video source to one of the RCA cable. Voila, a television display! There's three little buttons in...

$49.95

66 IN STOCK

HDMI 4 Pi: 7" Display no Touchscreen 800x480 - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1934

Make a lovely video setup with a 7" screen at 800x480 resolution . For this model, we tried to get an inexpensive 800x480 display that was still...

Make a lovely video setup with a 7" screen at 800x480 resolution . For this model, we tried to get an inexpensive 800x480 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL' display, the model has an extra-bright backlight that looks much better than other 7" TFTs we've tested. We include a driver board with HDMI, VGA and...

$74.95

32 IN STOCK

NTSC/PAL (Television) TFT Display - 7" Diagonal

PRODUCT ID: 947

Yes, this is an adorable small television! The visible display measures only 7" (17.8cm) diagonal, the TFT comes with a NTSC/PAL driver board,...

Yes, this is an adorable small television! The visible display measures only 7" (17.8cm) diagonal, the TFT comes with a NTSC/PAL driver board, enclosure and stand. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a composite video source to one of the RCA cable. Voila, a television display! There's some little buttons on the front that let you enter a menu...

$74.95

28 IN STOCK

RCA coupler - Male to Male

PRODUCT ID: 951

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So...

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So instead of a long cable from the display to something like the Raspberry Pi, just pop one of these in between!

$1.50

34 IN STOCK

HDMI 4 Pi: 5" Display (w/Touch) 800x480 - HDMI/VGA/NTSC/PAL

PRODUCT ID: 2110

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay . This display comes...

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay . This display comes with a driver board with HDMI, VGA, and Composite inputs and USB-enabled 40-pin to 50-pin touchscreen adapter board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. We also chose our favorite 5" touchscreen then paired it with a...

$84.95

7 IN STOCK

HDMI 4 Pi: 7" Display & Audio 1024x600 w/Touchscreen

PRODUCT ID: 2397

"Give me the works!" That's what we said when we put together this 7" screen at 1024x600 resolution, with...

"Give me the works!" That's what we said when we put together this 7" screen at 1024x600 resolution, with a resistive touchscreen overlay AND with HDMI stereo speaker support ! For this model, we tried to get an inexpensive 1024x600 touchscreen display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL'...

$99.95

4 IN STOCK

Adafruit Qualia 9.7" DisplayPort Monitor - 2048x1536 Resolution

PRODUCT ID: 1652

Add a glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS display to any computer with a Thunderbolt/DisplayPort port. This product...

Add a glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS display to any computer with a Thunderbolt/DisplayPort port. This product comes with a new 9.7" diagonal TFT display module (the same one used in the iPad 3 & 4), along with our custom made driver board, a stand-up monitor enclosure kit, 10' DisplayPort cable and 9V power adapter. The driver board is a work of art (it was designed by resident engineer KTOWN) - and we use...

$224.95

4 IN STOCK

Monochrome 2.3" 128x32 OLED Graphic Display Module Kit

PRODUCT ID: 2675

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very...

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display...

$39.95

33 IN STOCK

HDMI 4 Pi: 7" Display & Audio 1024x600 - HDMI/VGA/NTSC/PAL

PRODUCT ID: 2301

Yes, this is a 7" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that...

Yes, this is a 7" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. We include a driver board with HDMI, VGA and Composite inputs as stereo 4 ohm at 3W output speaker driving capability. The visible display measures 7" diagonal and is a 'raw TTL' display. The set up is very easy to use...

$84.95

1 IN STOCK

HDMI 4 Pi: 7" Display (no Touch) w/Mini Driver - 800x480 HDMI

PRODUCT ID: 1933

Yes, this is a 7" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the best medium-size display that...

Yes, this is a 7" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB port. The visible display measures 7" diagonal and is a 'raw' TTL display as is used in portable electronics. The driver board only has an...

$69.95

25 IN STOCK

Monochrome 1.54" 128x64 OLED Graphic Display Module Kit

PRODUCT ID: 2720

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 1.54"...

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 1.54" diagonal , and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to...

$34.95

35 IN STOCK

HDMI 4 Pi: 7" Display no Touchscreen 1024x600- HDMI/VGA/NTSC/PAL

PRODUCT ID: 2299

Make a lovely video setup with a 7" screen at 1024x600 resolution . For this model, we tried to get an inexpensive 1024x600 display that was...

Make a lovely video setup with a 7" screen at 1024x600 resolution . For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL' display. We include a driver board with HDMI, VGA and Composite inputs. The setup is very easy to use - simply connect a 5-12VDC adapter to the 2.1mm...

$74.95

1 IN STOCK

MONOCHRON KS0108 Graphic LCD - white on black

PRODUCT ID: 253

A big, bold, beautiful, black LCD with white back-lit pixels. This LCD is the graphical upgrade to those popular 16x2 LCDs, but allows full graphical...

A big, bold, beautiful, black LCD with white back-lit pixels. This LCD is the graphical upgrade to those popular 16x2 LCDs, but allows full graphical control. This LCD is used in the MONOCHRON kit, we had to custom order these to get the black color so they are more expensive than the more common blue & white ones. Black background with 128 x 64 'monochrome' white pixels Low power white LED back-light The LCD is driven by on-board 5V...

$30.00

13 IN STOCK

HDMI 4 Pi: 7" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1931

Make a lovely video setup with a 7" IPS screen at 1280x800. Here we have a beautiful bright 7" TFT display with incredibly high resolution and great...

Make a lovely video setup with a 7" IPS screen at 1280x800. Here we have a beautiful bright 7" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw LVDS' display as is used in a tablet which makes it ultra thin and very bright. We include a driver board with...

$114.95

OUT OF STOCK

HDMI 4 Pi: 7" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1726

Make a lovely audio/video setup with a 7" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 7" TFT display...

Make a lovely audio/video setup with a 7" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 7" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw LVDS' display as is used in a tablet which makes it...

$124.95

OUT OF STOCK

RePaper - 1.44" Graphic eInk Development Board - SG020

PRODUCT ID: 1347

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 1.44" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V...

$32.95

DISCONTINUED

NTSC/PAL (Television) Video Glasses

PRODUCT ID: 1452

You are from the future with these futuristic video glasses. Or at least, an 80's version of the future. Wearing these turns your vision into what...

You are from the future with these futuristic video glasses. Or at least, an 80's version of the future. Wearing these turns your vision into what appears to be a 52" television a few feet away. These are basic video glasses, they do work well, taking standard NTSC/PAL video in and projecting a 320x240 display onto your eyeballs. They're not terribly comfortable for long term use as they're a bit heavy, but we think these would be best used for...

$109.95

DISCONTINUED

Graphic ST7565 Negative LCD (128x64) with RGB backlight + extras - ST7565

PRODUCT ID: 438

This graphical display looks fantastic, at a great price! This display will add the ultimate cool to your project, with a black negative display that...

This graphical display looks fantastic, at a great price! This display will add the ultimate cool to your project, with a black negative display that has a full RGB LED backlight. You can control with PWM to make any color you can imagine, and it will look stunning with the black inverted (negative) background. Four mounting holes and a blank 11 pin 2mm-pitch labeled breakout on the side - we just soldered some wire to each hole as shown in the...

$18.95

DISCONTINUED

RePaper - 2.7" Graphic eInk Development Board - SM027

PRODUCT ID: 1346

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.7" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V and...

$39.95

DISCONTINUED

RePaper - 2.0" Graphic eInk Development Board - SG020

PRODUCT ID: 1316

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And...

Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.0" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. This kit comes with a driver board that is powered from 3V and...

$34.95

DISCONTINUED

2.8" TFT Touch Shield for Arduino - 2.8"

PRODUCT ID: 376

We've discontinued this version of the shield (which was expensive and difficult to make) and replaced it with a version 2: its got a better...

We've discontinued this version of the shield (which was expensive and difficult to make) and replaced it with a version 2: its got a better price, uses way fewer pins, is Mega/Leonardo compatible and has a great touchscreen controller built in. Wow! Check it out here. Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.8" diagonal) bright (4...

$59.00

DISCONTINUED

20x2 Character VFD (Vacuum Fluorescent Display) - SPI interface - 20T202DA2JA

PRODUCT ID: 347

One up your plain old character LCD with a gorgeous VFD! These displays look and act just like character LCDs but are way glowier, and are very...

One up your plain old character LCD with a gorgeous VFD! These displays look and act just like character LCDs but are way glowier, and are very readable even from a distance. As a bonus, you only need 3 digital pins to control it as it is a SPI/serial interface not parallel. We have a datasheet for the module and the datasheet for the controller chip (with much more detail in case you need it) These are often used at point of sale machines (at...

$29.95

DISCONTINUED

5.6" Display & Audio 1280x800 (720p) Kit - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1695

Make a lovely audio/video setup with a 5.6" 720p screen with HDMI stereo speaker support. For video, we have a super-sharp 5.6" TFT display...

Make a lovely audio/video setup with a 5.6" 720p screen with HDMI stereo speaker support. For video, we have a super-sharp 5.6" TFT display with incredibly high resolution - it has 270 PPI! We tried to get the smallest & highest resolution display that would be good for embedded computing usage. The visible display measures 5.6" diagonal and is a 'raw' LVDS display as is used in a tablet, ultra thin with some mounting...

$149.95

DISCONTINUED

HDMI 4 Pi - 5.6" Display 1280x800 (720p) Kit - HDMI/VGA/NTSC/PAL

PRODUCT ID: 1666

Yes, this is a super-sharp 5.6" TFT display with incredibly high resolution - it has 270 PPI! We tried to get the smallest & highest...

Yes, this is a super-sharp 5.6" TFT display with incredibly high resolution - it has 270 PPI! We tried to get the smallest & highest resolution display that would be good for embedded computing usage. The visible display measures 5.6" diagonal and is a 'raw' LVDS display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs. The display is...

$139.95

DISCONTINUED

Pixel Qi 10" Display with Controller- 1024x600 HDMI/VGA/NTSC/PAL

PRODUCT ID: 1303

We're really excited to offer the revolutionary Pixel Qi display, a full color screen that can also be used in daylight. The Qi has three modes -...

We're really excited to offer the revolutionary Pixel Qi display, a full color screen that can also be used in daylight. The Qi has three modes - backlit color, backlit grayscale and daylight grayscale. In normal office/indoor use you'll want to go with keeping the backlight on to reveal the color layer. The screen works just like any other 10" TFT with fast refresh (not like slow e-ink). When a bright light shines on it, the display turns...

$179.95

DISCONTINUED

128x64 Graphic VFD (Vacuum Fluorescent Display) - SPI interface

PRODUCT ID: 773

For blue-glow lovers, this is a graphical VFD with 128x64 bit resolution and a stunning high-brightness/high-contrast look. This module would be a...

For blue-glow lovers, this is a graphical VFD with 128x64 bit resolution and a stunning high-brightness/high-contrast look. This module would be a great addition to any project where readability is a must - you can read it in daylight, and at any angle. The VFD module supports both 8-bit parallel and SPI modes of communication. The SPI protocol allows to write and read pixels so no RAM is required to buffer the display (most 128x64 SPI displays...

$94.95

DISCONTINUED

2.2" 18-bit color TFT LCD display with microSD card breakout - HX8340BN

PRODUCT ID: 797

This TFT was discontinued! We have another 2.2" TFT in the shop, so check that out if you need a 2.2" display for your project. Please note...

This TFT was discontinued! We have another 2.2" TFT in the shop, so check that out if you need a 2.2" display for your project. Please note it does not use the same wiring or controller so it is not a drop-in replacement for this TFT. This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 3-wire SPI to communicate and has its own pixel-addressable frame...

$29.95

DISCONTINUED

2.8" 18-bit color TFT LCD with touchscreen breakout board - ILI9325

PRODUCT ID: 335

This screen has been discontinued, but we have a nearly identical replacement, the 2.8" ILI341 touchscreen breakout which as both 8-bit and SPI...

This screen has been discontinued, but we have a nearly identical replacement, the 2.8" ILI341 touchscreen breakout which as both 8-bit and SPI interface modes as well as a MicroSD card socket all in the same form factor so check it out! Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with...

$40.00

DISCONTINUED

PIXEL Guts Kit - Bluetooth Controlled 32x32 RGB LED Matrix Kit - V2.5

PRODUCT ID: 1357

Control a 32x32 LED matrix with your Android, PC, Mac, Linux, Raspberry Pi, or BeagleBone Black with the Pixel Guts Kit V2.5 ! Simply use...

Control a 32x32 LED matrix with your Android, PC, Mac, Linux, Raspberry Pi, or BeagleBone Black with the Pixel Guts Kit V2.5 ! Simply use PIXEL’s free apps and send images, GIF animations, scrolling text, Twitter feeds, and your own pixel art creations in minutes, no soldering or coding required! As an added bonus, the 180+ works of original pixel art commissioned for the Kickstarter project comes included too. PIXEL has two modes:...

$225.00

DISCONTINUED

LCDs & Displays