SparkFun will be closed for the Thanksgiving holiday from 3pm on 11/23 through 11/27. Orders placed after 2pm on the 23rd will ship out Monday the 28th.
- Home
- Product Categories
- CNC
- Shapeoko Deluxe Kit
images are CC BY-NC-SA 3.0
Description: This is the Shapeoko Deluxe Kit, a desktop, 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, hardwoods, and plastics. This special SparkFun Edition of the Shapeoko Kit includes everything from the base frame and hardware to the motors and SparkFun Stepoko controller. This is an entry-level CNC machine designed for hobbyists, artists, and fabricators! The only thing that is not included is a trim router which can be purchased from most hardware stores or online retailers.
The included SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to accept stepper motor commands. The Stepoko’s design and firmware are completely open source and it works with an open source Java based cross platform G-Code sending application to translate commands. Don’t worry, we’ve designed the Stepoko to be as simple to use as possible. With it being pre-programmed grbl software and the installation of the Stepoko consisting of just plugging the stepper motors in, connecting it to power and to your computer you’ll be amazed by just how simple this board really is! To top it off, we’ve designed the SparkFun Stepoko to fit and be secured inside of a custom Big Red Box for an effective enclosure option that allows access to all of the boards connectors and a spot for the massive heatsink to rest in.
The Shapeoko 3 has a cutting area of 425mm x 425 mm x 75mm (16" x 16" x 3") and an overall footprint of 725mm x 600mm (28.5" x 23.6"). We don’t currently carry a router to go on your machine. The folks at Shapeoko recommend the Dewalt DW611 or the Porter Cable 450 to use with the machine. We ended up using a cheap Harbor Freight one that we 3D printed an adapter for to make it fit. Don’t forget you can put whatever you want on the end, whether that’s a laser, 3D print extrusion head, or a marker. Get creative!
The new revision of the Stepoko board updates the firmware to the latest version (0.9j). We’ve also added a piece of thermal gap filler to help electrically insulate the board from your chassis and prevent problems from ESD. Finally, we added three cable carriers to help get your cabling under control.
Note: The power cable included in this kit is designed for the United States National Plug Standard. If you are purchasing this kit outside the US you will need to use or buy a power cable that fits your country’s standard.
Note: Please keep in mind that the Shapeoko Deluxe Kit Assembly Guide in the Documents section below lists items for the Carbide3D version of the complete Shapeoko kit, not the SparkFun version. Be sure to reference the hard copy guide that comes with your kit when ordered.
Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please do not hesitate to contact us to see if further actions may be taken.
Includes:
- 1x SparkFun Stepoko (with thermal gap filler)
- 1x Shapeoko 3 CNC Machine - Mechanical Kit
- 4x Stepper Motor - 125 oz.in (200 steps/rev)
- 1x Power Supply - 24V 5A
- 1x Power Cable - 7A IEC C13
- 1x USB Cable A to B - 6 Foot
- 1x Toggle Switch
- 1x Big Red Box Enclosure (Milled)
- 3x Cable carrier
Features:
- Footprint: 725mm x 600mm (28.5" x 23.6")
- Cutting Area: 425mm x 425 mm x 75mm (16" x 16" x 3")
- Motion System: GT2 Belting, 2mm pitch with NEMA23 Motors
- Frame: SparkFun Red 10ga Formed Steel Plates with Aluminum Extrusions
- Recommended Spindle: Dewalt DW611 or Porter Cable 450
- Weight ~55lbs.
Documents:
- Stepoko Schematic
- Stepoko Eagle Files
- Stepoko Hookup Guide
- Shapeoko Deluxe Kit Assembly Guide
- Shapeoko Coaster Project
- Information Page
- Thermal Gap Filler Datasheet
- Support Documentation
- Universal G-Code Sender
- grbl Wiki
- GitHub (grbl Repo)
- GitHub (Stepoko Design Files, Library, & Example Code)
Customer Reviews
5 out of 5
Based on 1 ratings:
One of the cooliest things I've ever owned
It’s been a learning process but I’ve enjoyed working with all aspects of CNC machining. I’ve had set backs and success. It’s a great machine and hope to continue learning all the basics and tricks.
I was really bummed to see that the Shapeoko 3 Sprakfun delux kit I just received didn’t include the 2016 summer updates that now are included in the Carbide 3D version. Are there plans to update the design?
I’ve noticed, even with thermal gap filler, when I turn off my router (dewalt 611) on low rpm, it makes the Z axis jump up about 2 or 3 cm, a few times. When this happens, I can’t control the cnc from universal G-code sender, and have to reset everything…. This is frustrating when doing jobs that require multiple endmills ( it’s difficult to recalibrate X and Y multiple times). I’ve noticed it doesn’t seem to happen if I turn the speed of the router up a lot before turning it off. To avoid this all together, I plug the router into an outlet that is controlled by a light switch.
Me too, and I am using Makita RT0700C. It seems that the Shapeoko board cannot withstand the noise from the switching of the AC motor (I have already installed the insulation pad from Sparkfun). Thanks for the tips of remotely switching the router. Will try to see if this helps in my Makita router.
Is the Sparkfun Deluxe kit fully compatible to the Shapeoko (direct) Expansion Pack upgrade?
Yes.
Might have to make up new connectors, expansion kits are Molex
I am thinking of starting to manufacture a project that I’ve designed. I’m looking at selling around 50 a year. The enclosures I use is a Serpac ABS plastic case that I have to drill quite a few holes in, including several irregular shaped ones (square and double D). The enclosure wall is about 100 mils. As these have to match up with the SMT PCB inside, they need to be accurately places (+- a few mills).
How hard is it to convert a DXF file (I have) to g-codes?
Anyone have any experience using the Shapeopo on such? I was also looking at a CO2 laser CNC, but that’s another $500. Advise?
Converting a DXF to G-code is called CAM. List of free / opensource options for this: http://www.shapeoko.com/wiki/index.php/CAM
Overview of the workflow: http://www.shapeoko.com/wiki/index.php/Workflow
Awesome machine! I can’t tell if the whole kit, ie plates, spindle mount, is under an open license. If so, are there any CAD files on this?. I am trying to figure out if I can somehow increase the reach of the Z axis by modifying it a little bit (extending some plates and rails). Any input on this will be appreciated.
There is actually a discussion on this on the product page for the hardware. The result was the guys from Shapeko pointing here.
I am very intrigued in the Shapeoko. I was just wondering how Sparkfun cuts the big Red Box for the Shapeoko. By any chance does Sparkfun cut’s the ports of the Big Red Box with a Shapeoko?
If not could you share how you cut the Box?
We actually have a larger CNC in the building we use to do these on a larger scale. It is what we also use to cut the heatsink on the Stepoko. The process for those might make an interesting tutorial at some point…
Does it work with a Dremel Tool?
One can make a mount for a Dremel and use it if desired — a trim router is a much better option though:
http://www.shapeoko.com/wiki/index.php/Spindle_Options
The mount is designed for a DeWalt DWP611 router, but with some work, you could mount any tool you like. Modifications have included drag knifes, pens, hot wire cutters, and laser engravers/cutters.
The actual cutting tool isn’t controlled by the kit at all. While the Dremel Tool is likely much smaller than the mounting hole assuming you can find a way to mount it will you should be able to use a Dremel with no problem.
I’m seriously considering purchasing your version over Carbide’s since it has 4" extra cut on the x&y. But does your kit come with the free Carbide Create software?
The physical machines and their cutting area are the same as #108770 noted. More details here: http://www.shapeoko.com/wiki/index.php/Shapeoko_3#Overview
Carbide Create currently requires a Carbide Motion Machine Control Board EDIT: or activation w/ a code for use w/ the SparkFun Stepoko board: http://docs.carbide3d.com/article/75-sparkfun-stepoko-activation
I find InkScape and MakerCAM and F-Engrave quite capable though: http://www.shapeoko.com/projects/project.php?id=154
Since Sparkfun is apparently not interested in replying to its potential customers, I’ll reply. The mechanical kit is pretty much identical to Carbide’s basic kit (not the XL or XXL), so the working area will be identical. I don’t know where you got the differing values. Sparkfun’s kit includes their own controller, however. Carbide Create does not work with Sparkfun’s controller. I believe Carbide said at one point that they’d make a compatible version, but that’s likely fallen by the wayside. There are a plethora of free and paid programs compatible with Sparkfun’s Shapeoko, however. There is much information on the Shapeoko wiki and forums.
P.S. Check out prior reviews of the Shapeoko3 by clicking “previous versions” up there under the price.
So the Power supply is one of those universal ones that is compatible with both 120 and 240v?? it aint specified and not every power-supply is compatible with both US and EU voltages
It is 240v compatible, but the line cord is US style. You can use an IEC line cord from your country without a problem!