USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

PRODUCT ID: 954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a...

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V...

$9.95

IN STOCK

SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

PRODUCT ID: 851

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two! This cable is RG178 and is 15cm (5.9") long not including the SMA connector. It has a panel-mount SMA connector on the end, often used for GPS and...

$3.95

IN STOCK

USB DIY Connector Shell - Type Micro-B Plug

PRODUCT ID: 1390

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs. USB DIY Connector Shell - Type Micro-B Plug (3:13)

$0.95

IN STOCK

2-pin JST SM Plug + Receptacle Cable Set

PRODUCT ID: 2880

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has...

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST...

$0.75

IN STOCK

JST 2-pin cable

PRODUCT ID: 261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger! We don't have the...

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger! We don't have the 'mating' version of this, with the receptacle - but we do have a long extension cable that can be cut in half. New! We now use genuine JST PH connectors for these cables so they are easy to insert and remove. For more information about JST PH connectors, visit the JST website

$0.75

IN STOCK

USB DIY Slim Connector Shell - MicroB Plug

PRODUCT ID: 1826

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a modern look. We also carry the slim size in USB-A male and USB-microB female. Normal DIY "USB shells" are available in USB A plug, micro...

$0.95

IN STOCK

USB DIY Connector Shell - Type A Male Plug

PRODUCT ID: 1387

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available...

$0.95

IN STOCK

USB DIY Connector Shell - Type A Socket

PRODUCT ID: 1388

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available...

$0.95

IN STOCK

Tiny OTG Adapter - USB Micro to USB

PRODUCT ID: 2910

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was...

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks. At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen. But don't let the size fool you - this is a perfect and easy way to turn a device or cable with a USB-A to a USB-micro, great for use with OTG...

$2.95

IN STOCK

Panel Mount USB Cable - A Male to A Female

PRODUCT ID: 908

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy...

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box. The jack half has two mounting 'ears' with 4-40 screws installed, 30mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put...

$3.95

IN STOCK

JST-PH Battery Extension Cable - 500mm

PRODUCT ID: 1131

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One...

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the battery pack far from your Flora but useful in many other situations where you need a little more space. JST-PH Battery Extension Cable -...

$1.95

IN STOCK

Waterproof DC Power Cable Set - 5.5/2.1mm

PRODUCT ID: 743

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that...

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). They are a little bulkier than normal DC jacks because of the o-ring and removable over-screw. The o-ring is what makes the waterproof seal, and the over-screw keeps the two halves connected solidly Comes as a set of...

$2.50

OUT OF STOCK

Premium Female/Male 'Extension' Jumper Wires - 40 x 6" (150mm)

PRODUCT ID: 826

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires...

$3.95

IN STOCK

USB cable - A/MicroB - 3ft

PRODUCT ID: 592

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino (among other things)....

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino (among other things). Approximately 3 feet / 1 meter long

$2.95

IN STOCK

USB DIY Connector Shell - Type Mini-B Plug

PRODUCT ID: 1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A...

$0.95

IN STOCK

4-pin JST SM Plug + Receptacle Cable Set

PRODUCT ID: 578

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type...

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector datasheet Our digital...

$1.50

IN STOCK

Waterproof Polarized 4-Wire Cable Set

PRODUCT ID: 744

Outdoor enthusiasts rejoice! We now have very useful 4-wire polarized cable sets in a waterproof variety. These cable sets are ideal for projects...

Outdoor enthusiasts rejoice! We now have very useful 4-wire polarized cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). Each cable has 4 color-coded conductors (red, black, white yellow) that match between the sides, for easy wiring and connectors are polarized so you can't plug them in wrong. They are a little bulky the o-ring and...

$2.50

OUT OF STOCK

2.1mm female/male barrel jack extension cable - 1.5m / 5 ft

PRODUCT ID: 327

This product is a 3-in-1 cable. By itself, it can act as an extension cord for any 5.5/2.1mm DC power cable. The heavy 24 AWG wires can handle...

This product is a 3-in-1 cable. By itself, it can act as an extension cord for any 5.5/2.1mm DC power cable. The heavy 24 AWG wires can handle up to 5A. You can also cut it half to make two barrel cables (one plug and one jack). This will allow you to connect a classic 'wall wart' to a breadboard or PCB without having to solder in a bulky power jack. Or you can use the plug half to connect some batteries to something with a 2.1mm jack. The...

$2.95

IN STOCK

USB OTG Host Cable - MicroB OTG male to A female

PRODUCT ID: 1099

This cable looks like a USB micro cable but it isn't! Instead of a USB A Plug, it has a USB A Socket on the end. This cable is designed for use with...

This cable looks like a USB micro cable but it isn't! Instead of a USB A Plug, it has a USB A Socket on the end. This cable is designed for use with OTG (On the Go) host devices (like the Arduino Due or many tablets) so you can connect a mouse, keyboard, or any other USB device. You'll still need to have drivers on the device, this cable is just a cable and contains no microcontroller or electronics inside. Approximately 6" long from end to end....

$2.50

65 IN STOCK

Panel Mount Ethernet Extension Cable

PRODUCT ID: 909

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when...

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box. The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The...

$4.95

IN STOCK

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

PRODUCT ID: 1675

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We...

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The ribbon cable is 0.06mm/0.025" pitch and the connector is a 1.27mm (0.05") pitch 2x5 box....

$2.95

IN STOCK

FTDI Serial TTL-232 USB Cable

PRODUCT ID: 70

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a...

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. These are perfect for use with a Boarduino, Meggy's, or other Arduino...

$17.95

IN STOCK

3-pin JST SM Plug + Receptacle Cable Set

PRODUCT ID: 1663

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a...

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector datasheet...

$1.50

IN STOCK

Panel Mount USB Cable - B Female to Micro-B Male

PRODUCT ID: 937

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when...

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box. The jack half has two mounting 'ears' with M3 screws installed, ~1.1" / ~29mm apart. Can be used with box walls 0.125" to 0.25" wide. Depending on your usage you may want shorter or longer screws, feel free to experiment!...

$3.95

IN STOCK

USB DIY Slim Connector Shell - A-M Plug

PRODUCT ID: 1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a modern look. We also carry the slim size in Micro-B Male and USB-microB female. Normal DIY "USB shells" are available in USB A plug,...

$0.95

IN STOCK

Panel Mount USB Cable - B Female to Mini-B Male

PRODUCT ID: 936

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. We think this would be most handy when...

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, USB Boarduino, etc into a box! The jack half has two mounting 'ears' with M3 screws installed, ~28.5mm apart. Can be used with box walls 0.125" to 0.25" wide. If you have a thinner-walled box, simply swap out the M3 screws for...

$3.95

IN STOCK

USB DIY Slim Connector Shell - Mini-B Plug

PRODUCT ID: 1825

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY Mini-B...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY Mini-B Male Plug connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a modern look. We also carry the slim size in USB-A male, microB male, and USB-microB female. Normal DIY "USB shells" are available in USB A plug, micro B,...

$0.95

IN STOCK

Miniature Slip Ring - 12mm diameter, 12 wires, max 240V @ 2A

PRODUCT ID: 1195

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the miniature plastic tube is a gold plated slip ring for 12 wires. There are twelve color coded wire sets made of 28 AWG and no matter how you twist...

$24.95

42 IN STOCK

USB Cable - Standard A-B - 3 ft/1m

PRODUCT ID: 62

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 feet /...

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 feet / 1 meter long Color may vary!

$3.95

IN STOCK

JST 2-pin Extension Cable with On/Off Switch - JST PH2

PRODUCT ID: 3064

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin...

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with our JST-terminated battery packs or LiIon & LiPoly batteries/accessories/chargers! One end has a classic female JST-PH2 socket, and the other end has a...

$2.95

IN STOCK

USB cable - 8" A to Mini B Charging and Micro B Data

PRODUCT ID: 1197

Mini or Micro? Mini or Micro??? Mini AND Micro! This is a handy USB cable, it's compact so you can toss it into your toolkit, and has both Mini-B and...

Mini or Micro? Mini or Micro??? Mini AND Micro! This is a handy USB cable, it's compact so you can toss it into your toolkit, and has both Mini-B and Micro-B connector. Now you can hook up your LiPo Charger or a Arduino Micro/Leonardo/Raspberry Pi using the same cable, sweet! Approximately 8" long from end to end, its a little more compact than our classic 3' long cable This cable does not contain a hub, so you can only connect one USB device at...

$3.95

OUT OF STOCK

Premium Female/Male 'Extension' Jumper Wires - 40 x 3" (75mm)

PRODUCT ID: 825

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the...

$3.95

IN STOCK

Panel Mount 2.1mm DC barrel jack

PRODUCT ID: 610

This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely....

This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project enclosure. We like this jack in particular for its long body (so you can use it on thicker wooden panels), sturdy PCB spacer with 3 easy-to-solder eyes and 'forgiving' plastic lip that hides the drill hole.

$2.95

IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 20 x 6"

PRODUCT ID: 1954

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6"...

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin...

$1.95

IN STOCK

RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

PRODUCT ID: 852

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two! This cable is RG178 and is 15cm (5.9") long not including the RP-SMA connector. It has a panel-mount RP-SMA connector on the end, often used for...

$3.95

IN STOCK

Panel mount HDMI Cable - 40 cm

PRODUCT ID: 978

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in...

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two #4-40 screws are used to attach the female socket end, 26.9mm apart. Two hex-body standoff-screws are included as shown above and the hex nuts are embedded inside the molded end. Cable is 40cm long (about 16 inches). This is a HDMI 1.4 cable.

$5.95

57 IN STOCK

USB Cable with Switch

PRODUCT ID: 1620

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you...

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. The data lines are not connected through - this is a ground/5V power switch only! The...

$2.95

IN STOCK

40-pin FPC Extension Board + 200mm Cable

PRODUCT ID: 2098

Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40-pin flex connectors...

Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40-pin flex connectors (both are bottom contact type), and an extension cable to add ~22cm (20cm cable plus 2cm board) Each order comes with one board a 20cm long, 40-pin 0.5mm pitch FPC cable and board. Works great with our 40pin TFTs!

$4.50

IN STOCK

HDMI Flat Cable - 1 foot / 30cm long

PRODUCT ID: 2197

Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is 1 foot...

Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is 1 foot long (~30 cm). This cable is absolutely perfect for an LCD Raspberry Pi project. The cable is so thin and flexible that you won't have any loose dangling HDMI cables getting in the way, and you can even fit your Pi behind the screen.

$3.95

IN STOCK

Passive PoE Injector Cable Set

PRODUCT ID: 435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need...

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an official Power-over-Ethernet standard that allows devices and routers to activate a 48VDC power line on the unused Ethernet pins (4,5 and 7,8) but PoE is...

$5.95

IN STOCK

USB DIY Connector - MicroB Female Plug

PRODUCT ID: 1829

As an addition to our other USB DIY shells, we have a 'micro B female' in a panel-mount-like connector. This isn't true panel mount but...

As an addition to our other USB DIY shells, we have a 'micro B female' in a panel-mount-like connector. This isn't true panel mount but you could glue the black plastic shell into your project and then press-fit in the micro B connector. The 5-pins are much easier to solder than a surface mount connector We have other DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a...

$0.95

IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 20 x 3"

PRODUCT ID: 1953

These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3"...

These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon...

$1.95

IN STOCK

10-pin Socket/Socket IDC cable - 6"

PRODUCT ID: 370

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long...

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side, they're quite sturdy!

$2.00

57 IN STOCK

MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter

PRODUCT ID: 2789

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC...

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. We also have a cable-version of this, but this one is compact and cute! Since this does not...

$1.95

IN STOCK

MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter

PRODUCT ID: 2727

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel...

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. We also have a shorty adapter-without-cable version Since this does not have any resistors or other...

$1.95

IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 40 x 12" (300mm)

PRODUCT ID: 824

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires...

$7.95

IN STOCK

Right Angle USB cable - A/MicroB

PRODUCT ID: 1318

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the...

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a Raspberry Pi Model A or B as the cable doesn't stick out as far. We got cables with extra-beefy 24 AWG power wires, and 28 AWG data lines, so it's particularly good for power-hungry devices like...

$4.95

IN STOCK

USB/Serial Converter - FT232RL

PRODUCT ID: 18

This USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately)...

This USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-10V serial (RS232) not 5V serial (TTL), good for old devices like GPS, handhelds, programmers, etc with chunky DB9's on the side. Some cheaper RS232 cables 'cheat' and only give you 0-5V which wont work with some devices - this one has a true voltage doubler/inverter to make it more...

$14.95

IN STOCK

USB Power Only Cable with Switch - A/MicroB

PRODUCT ID: 2379

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so...

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well. Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2. Just hook up the standard USB end to a 5V 1A USB port power supply or 5V 2A USB port power supply and the Micro B end to a Raspberry Pi and you have a Pi with a switch. This...

$5.95

IN STOCK

USB A/Micro Cable - 2m

PRODUCT ID: 2185

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer...

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonardo/Micro, FONA or Trinket (among other things). It's got extra beefy 24 AWG power wires so it works great for high power (1-2 Amp) computer powering. If you want something a little shorter, check out our 3'...

$4.95

IN STOCK

USB cable - 6" A/MicroB

PRODUCT ID: 898

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi...

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things). Approximately 6.5" long from end to end, its a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

IN STOCK

6-conductor 0.1" socket-socket cable - 6" long

PRODUCT ID: 206

6" (150mm) long jumper cable of 6 conductors, 0.1" spacing with two 'female'/sockets on either end. Great for wiring up ShiftBrites together!

$1.75

3 IN STOCK

HDMI Cable - 1 meter

PRODUCT ID: 608

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet)....

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). This is a HDMI 1.3 cable.

$4.95

IN STOCK

Mini HDMI to HDMI Cable - 5 feet

PRODUCT ID: 2775

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy...

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long (about 5 feet). Perfect for use with your new Raspberry Pi Zero!

$5.95

OUT OF STOCK

Panel Mount USB Cable - B Male to B Female

PRODUCT ID: 907

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting...

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box. The jack half has two mounting 'ears' with M3 screws installed, 1.1" / 29mm apart. Can be used with box walls 0.125" to 0.25" wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones. Cable, from connector to connector, is...

$3.95

IN STOCK

USB cable - A/MiniB - 3ft

PRODUCT ID: 260

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector,...

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other things. Approximately 3 feet / 1 meter long Color may vary!

$4.00

IN STOCK

Micro B USB 2-Way Y Splitter Cable

PRODUCT ID: 3030

Double up on your micro USB capabilities with the Micro B USB 2-Way Splitter Cable . This splitter is great for reducing cable clutter and freeing up...

Double up on your micro USB capabilities with the Micro B USB 2-Way Splitter Cable . This splitter is great for reducing cable clutter and freeing up port space. It takes a single Micro B connection (with data and power) and gives you two outputs. The longer cable has data and power brought to it. The shorter cable is only power. You can also use it just for power splitting if data is not needed, of course. Simply connect your existing...

$2.95

IN STOCK

USB to 2.1mm DC Booster Cable - 12V

PRODUCT ID: 2778

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. We also have a version that provides 9V, and if you just need a passthough cable, here's one for 5VDC. These are rated at 500mA output, but you...

$6.50

IN STOCK

Servo Extension Cable - 30cm / 12" long -

PRODUCT ID: 972

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo...

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later, a 3 pin female connection. It even keeps the common red/black/white color coding. A great add-on to our 16 channel PWM/Servo driver and goes with all the servos we carry.

$1.95

IN STOCK

Servo Extension Cable - 50cm / 19.5" long

PRODUCT ID: 973

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo...

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 50cm later, a 3 pin female connection. It even keeps the common red/black/white color coding. A great add-on to our 16 channel PWM/Servo driver and goes with all the servos we carry.

$2.50

IN STOCK

Slip Ring with Flange - 22mm diameter, 6 wires, max 240V @ 2A

PRODUCT ID: 736

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the plastic tube is a gold plated slip ring for 6 wires. There are six color coded wire sets made of 26 AWG and no matter how you twist the assembly,...

$14.95

IN STOCK

Right-Angle 3.5mm Stereo Plug to Pigtail Cable

PRODUCT ID: 1700

One of the most common converter cables you'll want in your cable collection - this 32" long cable converts a standard 3.5mm stereo jack to...

One of the most common converter cables you'll want in your cable collection - this 32" long cable converts a standard 3.5mm stereo jack to pigtail wires. Ground ring is black, middle ring is white and tip is red. Cable is 32"/81cm long from end to end. Right-Angle 3.5mm Stereo Plug to Pigtail Cable (4:49)

$1.95

64 IN STOCK

Miniature Slip Ring - 12mm diameter, 6 wires, max 240V @ 2A

PRODUCT ID: 775

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the miniature plastic tube is a gold plated slip ring for 6 wires. There are six color coded wire sets made of 26 AWG and no matter how you...

$17.50

IN STOCK

Cable Gland - Waterproof RJ-45 / Ethernet connector - RJ-45

PRODUCT ID: 827

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how...

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cables for power, data or sensors? That's where cable glands come in. By installing these over the cable, they form-fit to make a seal, keeping your project box innards safe from the outdoors. This particular gland is specifically...

$7.95

IN STOCK

6-pin JST SM Plug + Receptacle Cable Set

PRODUCT ID: 1665

These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching...

These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 6 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector datasheet Each...

$1.50

IN STOCK

In-line power cable 1 meter long extension cord (for EL wire)

PRODUCT ID: 616

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to...

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter long, you can of course snap more together if necessary, or cut and re-solder it if you need to shorten. Because this is meant for EL wire extending, and EL is not 'polarized' we don't guarantee that that the plug and...

$1.95

IN STOCK

USB Cable - 6" Standard A-B

PRODUCT ID: 900

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among other...

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among other things). 6" long from end to end, its a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

IN STOCK

USB Patterned Fabric Cable - A/MicroB - 3ft

PRODUCT ID: 2008

Oooh it's so soft! And that beautiful pattern! If you have to have visible cables then you might as well have the nicest fabric bound...

Oooh it's so soft! And that beautiful pattern! If you have to have visible cables then you might as well have the nicest fabric bound cable with a eye-catching snake-like pattern. That's why we now carry this standard A to micro-B USB cable for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino Leonardo/Micro, Raspberry Pi, NETduino, (among other things). Basically: have something with a microUSB port? This...

$3.95

IN STOCK

USB Extension Cable - 3 meters / 10 ft long

PRODUCT ID: 993

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years...

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years of reliability. We use these handy cables all over our factory and homes. Cable is standard "Adafruit black". Cable length: 10 feet (3 meters)

$3.95

IN STOCK

5-pin JST SM Plug + Receptacle Cable Set

PRODUCT ID: 1664

These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a...

These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 5 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector datasheet...

$1.50

IN STOCK

Cable Gland PG-9 size - 0.158" to 0.252" Cable Diameter - PG-9

PRODUCT ID: 761

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how...

$1.95

IN STOCK

Cable Gland PG-7 size - 0.118" to 0.169" Cable Diameter - PG-7

PRODUCT ID: 762

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how...

$1.95

IN STOCK

Bus pirate basic probe set

PRODUCT ID: 238

This is a interface cable designed for Bus Pirate which can makes it easier to connect the Bus Pirate to a circuit and get hacking!

$7.00

IN STOCK

USB 3-Way Charging Cable - iPhone 5/iPhone/iPad and MicroUSB

PRODUCT ID: 1514

For charging nearly any kind of portable gadget, this 3-in-1 cable can handle it. Great for use with a Mintyboost, or our USB power packs (or just...

For charging nearly any kind of portable gadget, this 3-in-1 cable can handle it. Great for use with a Mintyboost, or our USB power packs (or just powering your projects). One USB-A jack splits into three connectors: Micro USB, iPhone/iPad/iPod 30pin (for older iDevices) and the newer Lightning (newer iDevices). Approximately 6" long from end to end, it's a little more compact than our classic 3' long cables. Keep in mind, This...

$4.95

IN STOCK

Slip Ring with Flange - 22mm diameter, 12 wires, max 240V @ 2A

PRODUCT ID: 1196

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the plastic tube is a gold plated slip ring for 12 wires. There are 12 color coded wire sets made of 28 AWG and no matter how you twist the...

$19.95

IN STOCK

Stereo 3.5mm Plug/Plug Audio Cable - 6 feet

PRODUCT ID: 876

This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need...

This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices together. Cable is 6 ft long.

$2.95

6 IN STOCK

Ethernet Cable - 10 ft long

PRODUCT ID: 730

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 10...

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 10 feet long, black and has all 8 wires installed. Perfect for use with the BeagleBone, Arduino Uno Ethernet, Arduino Ethernet Shield, NETduino Plus, Patch Shield, PoE Injector cables, IoT Printer pack or any other Ethernet-cable-needing product! This is a 'straight-thru' cable, not a...

$2.95

IN STOCK

USB to 2.1mm DC Booster Cable - 9V

PRODUCT ID: 2777

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 9V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. We also have a version that provides 12V, and if you just need a passthough cable, here's one for 5VDC. These are rated at 500mA output, but you...

$6.50

96 IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 20 x 12"

PRODUCT ID: 1952

These Female/Male 'Extension' Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are...

These Female/Male 'Extension' Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin...

$3.95

IN STOCK

Pig-Tail Cables - 0.1" 2-pin - 4 Pack

PRODUCT ID: 1003

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into...

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakout, to control 16 PWM LEDs that are wired, but there's probably a dozen other uses. Come in a pack of four cables, 12 inches long,...

$1.95

IN STOCK

Ethernet RJ45 Female Socket Push-Terminal Block

PRODUCT ID: 2912

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No...

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required. Just push the little buttons and slide in your stranded or solid-core wire. Note that these aren't recommended for actual Ethernet traffic, especially long term...but for basic power/data distribution, RJ45's are great! This is the Ethernet (RJ45) Female Jack Push-Terminal...

$5.95

IN STOCK

USB cable - 6" A/MiniB

PRODUCT ID: 899

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things)....

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things). The cable is approximately 6" long - a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

IN STOCK

Slim HDMI Cable - 450mm / 1.5 feet long

PRODUCT ID: 2420

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is...

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 450mm long (~1.5 feet). Sporting a teeny 4mm diameter this cable stays out of your way! We also have slim HDMI cables at 914mm long and 1820mm long.

$9.95

IN STOCK

Ethernet RJ45 Male Plug Terminal Block

PRODUCT ID: 2913

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering...

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren't recommended for actual Ethernet traffic, especially long term...but for basic power/data distribution, RJ45's are great! This is the Ethernet...

$5.95

IN STOCK

50-pin FPC Extension Board + 200mm Cable

PRODUCT ID: 2571

Give your 50 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 50pin FPC extension board has two 50-pin flex...

Give your 50 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 50pin FPC extension board has two 50-pin flex connectors, and an extension cable to add ~22cm (20cm cable plus 2cm board) Each order comes with one board a 20cm long, 50-pin 0.5mm pitch FPC cable and board. Works great with our 50pin TFTs, or anything else with the same kind of connector!

$4.95

OUT OF STOCK

RCA (Composite Video, Audio) Male Plug Terminal Block

PRODUCT ID: 2792

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Male Terminal Block . RCA is one of the most common A/V connectors. We also have a (matching) RCA Female Jack Terminal...

$1.50

IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 36" - Red

PRODUCT ID: 2609

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 36" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 36" - Black

PRODUCT ID: 2608

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 36" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

91 IN STOCK

10-pin Socket/Socket IDC cable - Short 1.5"

PRODUCT ID: 556

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. This is a shorter version of the cable we've...

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. This is a shorter version of the cable we've carried for AVR programming, we use this for chaining together 16x24 LED matrix panels. About 1.5" long with two sockets crimped onto either side, they're quite sturdy!

$1.50

IN STOCK

VGA Cable - 1.5m long

PRODUCT ID: 1301

VGA cable, for connecting this VGA device to that VGA display. 1.5 meters long, two male DB-15 connector on either end with embedded ferrites VGA...

VGA cable, for connecting this VGA device to that VGA display. 1.5 meters long, two male DB-15 connector on either end with embedded ferrites VGA Cable - 1.5m long (10:41)

$1.95

IN STOCK

50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10" long

PRODUCT ID: 1682

FPC cables are super thin and flexible. They're often used in electronics when a a round cable would be too bulky, especially if you're...

FPC cables are super thin and flexible. They're often used in electronics when a a round cable would be too bulky, especially if you're dealing with 50 contacts like this one! This cable has 50 pins, 0.5mm pitch, and is 250mm long. It pairs well with our 50 pin 0.5mm pitch breakout board. 50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10" long (14:35)

$1.95

27 IN STOCK

USB 'Noodle' Cable - A/MicroB - 3ft

PRODUCT ID: 1513

Linguine? Rice sticks? Soba? Whatever your favorite noodle may be, you will be pleasantly reminded whenever using this noodle-shaped cable. This here...

Linguine? Rice sticks? Soba? Whatever your favorite noodle may be, you will be pleasantly reminded whenever using this noodle-shaped cable. This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile and classic Adafruit Black. Perfect for connecting a PC to your Arduino Leonardo/Micro, Raspberry Pi, NETduino, (among other things). Basically: it has a microUSB port? This will work! Approximately 3 feet / 1 meter...

$3.95

IN STOCK

Flexible USB Swivel Adapter

PRODUCT ID: 974

This flexible USB swivel adapter will extend your USB port out of the way. Useful when you want to attach a 'bulky' USB device without...

This flexible USB swivel adapter will extend your USB port out of the way. Useful when you want to attach a 'bulky' USB device without blocking a secondary port. We thought this would be handy for BeagleBone or Raspberry Pi users. Rotates 180 degrees in two axes, with a very nice solid construction.

$3.95

63 IN STOCK

Micro-HDMI to HDMI Socket Adapter Cable

PRODUCT ID: 1358

Turn a micro HDMI port into a 'regular sized' HDMI port with this handy adapter. Works great with the Beagle Bone Black, many cameras with...

Turn a micro HDMI port into a 'regular sized' HDMI port with this handy adapter. Works great with the Beagle Bone Black, many cameras with video out, etc. Approximately 6" long. Micro-HDMI to HDMI Socket Adapter Cable (0:27)

$6.95

55 IN STOCK

PS/2 Keyboard+Mouse to USB adapter

PRODUCT ID: 971

This is a nice solution to wanting to use PS/2 devices (such as our capacitive touch pad or magstripe readers). It's also handy if you want to...

This is a nice solution to wanting to use PS/2 devices (such as our capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard and mouse to a Raspberry Pi or Beagle Bone without taking up two USB ports. Inside is a full translation chip - a small USB microcontroller that will translate the PS/2 into "USB Keyboard" and "USB Mouse" We tested this with a Pi, Bone, Linux, Windows and Mac...

$5.95

IN STOCK

3.5mm Male/Male Stereo Cable - 1m

PRODUCT ID: 2698

Seamlessly transmit high-quality stereo audio with this 3.5mm Male/Male Stereo Cable. Ideal for "passing the AUX cord,"...

Seamlessly transmit high-quality stereo audio with this 3.5mm Male/Male Stereo Cable. Ideal for "passing the AUX cord," or connecting audio devices such as smartphones, tablets, MP3 players, car stereos, portable speakers or any other 3.5mm (otherwise known as "1/8 inch") outputs.

$2.50

79 IN STOCK

6-pin Socket/Socket IDC cable - 6"

PRODUCT ID: 371

Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long...

Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side, they're quite sturdy!

$2.00

IN STOCK

Ethernet Cable - 3 ft long

PRODUCT ID: 995

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 3...

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 3 feet long, comes in Adafruit black and has all 8 wires installed. Perfect for use with the BeagleBone, Arduino Uno Ethernet, Arduino Ethernet Shield, NETduino Plus, Patch Shield, PoE Injector cables, IoT Printer pack or any other Ethernet-cable-needing product! This is a 'straight-thru'...

$2.50

57 IN STOCK

Resistive Touchscreen Extension Cable - 20cm / 8" - 1mm Pitch

PRODUCT ID: 1662

Streeeeetch your resistive touch-screen's reach with a 20cm extension cord. This is a great accessory for our resistive touch screen controller...

Streeeeetch your resistive touch-screen's reach with a 20cm extension cord. This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. Pretty nice! The socket connector on the cable is symmetric so if it isn't working the way you like, flip over the connector into the socket. Resistive Touchscreen Extension Cable - 20cm /...

$2.50

IN STOCK

Micro HDMI to HDMI Cable - 2 meter

PRODUCT ID: 1322

Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for...

Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 2 meter long (about 6 feet). This is a HDMI 1.3 cable. Micro HDMI to HDMI Cable - 2 meter (0:47)

$9.95

82 IN STOCK

Ethernet Cable - 5 ft long

PRODUCT ID: 994

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 5...

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 5 feet long, comes in Adafruit black and has all 8 wires installed. Perfect for use with the BeagleBone, Arduino Uno Ethernet, Arduino Ethernet Shield, NETduino Plus, Patch Shield, PoE Injector cables, IoT Printer pack or any other Ethernet-cable-needing product! This is a 'straight-thru'...

$2.75

IN STOCK

USB A Jack to 5.5/2.1mm jack adapter

PRODUCT ID: 988

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple -...

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any resistors or other connections inside for the data lines so this won't work for charging an iPhone, iPod or iPad or other device which expects...

$2.95

IN STOCK

RCA (Composite Video, Audio) Female Jack Terminal Block

PRODUCT ID: 2793

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Female Jack Terminal Block . RCA is one of the most common A/V connectors. We also have a (matching) RCA Male Plug...

$2.50

IN STOCK

3.5mm Stereo to RCA (Composite Audio) Cable 6 feet

PRODUCT ID: 1013

One of the most common converter cables you'll want in your cable collection - this 6 foot long cable converts a standard 3.5mm stereo jack to...

One of the most common converter cables you'll want in your cable collection - this 6 foot long cable converts a standard 3.5mm stereo jack to two color-coded mono RCA coaxial jacks. You'll want this to convert a 'headphone' or 'line out' jack to your TV or stereo audio in panel. Perfect for use with component/composite video and audio, such as the Raspberry Pi® ! Cable is 6 ft long.

$2.95

52 IN STOCK

Silicone Cicoil Wire Cable - 4-pin 24AWG

PRODUCT ID: 1437

This supple, slippery silicone wire has 4 conductors, 24AWG each sealed in a full silicone casing. It's heavy duty so you can pass tons of...

This supple, slippery silicone wire has 4 conductors, 24AWG each sealed in a full silicone casing. It's heavy duty so you can pass tons of current but soft and flexible so its good for wearables. We think this would be a good pair for our LED strips. Silicone Cicoil Wire Cable - 4-pin 24AWG (0:05)

$9.95

30 IN STOCK

10-pin IDC Socket Rainbow Breakout Cable

PRODUCT ID: 1199

We don't really know what to call this thing - it's got a 10 pin IDC cable on one end 6 inches of rainbow ribbon and tipped with 0.1"...

We don't really know what to call this thing - it's got a 10 pin IDC cable on one end 6 inches of rainbow ribbon and tipped with 0.1" female socket connectors on the ends. We think this would be handy as a 10-pin JTAG breakout adapter, or maybe some sort of cable re-arranger. Anyhow, it seems useful and we picked up a bunch. Yeah we know it would be awesome if we could get a 6-pin version but the gray socket connector thing...

$3.95

IN STOCK

Pomona Test Lead Holder - For cables up to .21" / 3 AWG diameter - Orange - POM-1508

PRODUCT ID: 2624

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the orange version, meant for wires up to .21" diameter or 3AWG. With these racks, all of your patch cords...

$14.95

60 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 24" - Black

PRODUCT ID: 2606

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

61 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 24" - Red

PRODUCT ID: 2607

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 24" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

43 IN STOCK

1/4" (6.35mm) Stereo Plug Terminal Block

PRODUCT ID: 2911

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 1/4" (6.35mm) Stereo Plug Terminal Block . It's a pretty common size and is super useful for more heavy duty...

$1.95

IN STOCK

RCA coupler - Male to Male

PRODUCT ID: 951

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So...

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So instead of a long cable from the display to something like the Raspberry Pi, just pop one of these in between!

$1.50

51 IN STOCK

4-pin AT/ATX/IDE power cable

PRODUCT ID: 425

For big projects, with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. Only problem is that these supplies have...

For big projects, with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. Only problem is that these supplies have connectors that only plug into motherboards or hard drives. That's where this cable comes in. It has a matching 4-pin molex connector to the hard drive/CD-ROM power cables that come out of a power supply so you can use this to grab 5V or 12V. Heck, you can even use this cable while your computer is...

$1.95

47 IN STOCK

USB Power & Data Signal Extender - 30+ meters / 100+ feet

PRODUCT ID: 2676

Close your eyes... Now feel your Wireless troubles drift slowly away... Wouldn't it be great if you could replace your wireless project with...

Close your eyes... Now feel your Wireless troubles drift slowly away... Wouldn't it be great if you could replace your wireless project with wires? These USB Signal Extenders may be able to do that for you! The extenders can take power and data from USB (1.0 and 2.0, 3.0 not supported) and transmit them along an ethernet cable of up to 150ft and then back into USB. WHAT?!?!!?!? That's right folks. Send and receive both power...

$17.50

61 IN STOCK

Pomona Test Lead Holder - For cables up to .32" / 0 AWG diameter - Black - POM-4408

PRODUCT ID: 2625

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the black version, meant for wires up to .32" diameter or 0AWG. With these racks, all of your patch...

$11.95

34 IN STOCK

Panel Mount RCA (Composite Video, Audio) Cable

PRODUCT ID: 1729

This handy Panel Mount RCA Cable is perfect for component/composite video and audio and perfect for connecting our Raspberry Pi to RCA...

This handy Panel Mount RCA Cable is perfect for component/composite video and audio and perfect for connecting our Raspberry Pi to RCA component/composite screens. This cable comes with two nice RCA connectors and has two mounting screws 20mm apart. The cable is 264mm / 10.4" long.

$2.95

IN STOCK

Slim HDMI Cable - 914mm / 3 feet long

PRODUCT ID: 2421

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is...

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 914mm long (~3 feet). Sporting a teeny 4mm diameter this cable stays out of your way! We also have slim HDMI cables at 450mm long and 1820mm long.

$12.50

IN STOCK

Slim HDMI Cable - 1820mm / 6 feet long

PRODUCT ID: 2422

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is...

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 1820mm long (~6 feet). Sporting a teeny 4mm diameter this cable stays out of your way! We also have slim HDMI cables at 450mm long and 914mm long.

$14.95

IN STOCK

RCA (Composite Video, Audio) Cable 6 feet

PRODUCT ID: 863

This cable comes with two nice gold-plated RCA connectors. Perfect for use with component/composite video and audio, such as the YBox kit, Propeller...

This cable comes with two nice gold-plated RCA connectors. Perfect for use with component/composite video and audio, such as the YBox kit, Propeller Quick-proto for Quickstart board, and of course a Raspberry Pi® ! Cable is 6 ft long and has 75 ohm impedance.

$2.95

38 IN STOCK

Pomona Test Lead Holder - For cables up to .45" 4/0 AWG diameter - Blue - POM-2708

PRODUCT ID: 2623

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test...

For untangling insane hairdos we have moisturizers and combs, but if your desk or work bench is a big ol' mess of cables / wires / test leads then unfortunately you can't just comb it out. Introducing the Pomona Test Lead Holders ! No need to waste any more time searching for a particular test lead or cable. This is the blue version, meant for wires up to .45" diameter or 4/0AWG. With these racks, all of your patch cords...

$14.95

10 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Black

PRODUCT ID: 2611

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Black version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

17 IN STOCK

Mini DisplayPort to DisplayPort Cable - 10 ft/3 meters - White

PRODUCT ID: 1698

Connect your DisplayPort and Mini DisplayPort sources and devices with this bi-directional cable! This cable has a standard sized DisplayPort (DP)...

Connect your DisplayPort and Mini DisplayPort sources and devices with this bi-directional cable! This cable has a standard sized DisplayPort (DP) connector on one end and a Mini DisplayPort (MDP) connector on the other. The cable is bi-directional, which means that you can use a DP source with a MDP monitor or a MDP source with a DP monitor. The conductors are made of pure copper and the connectors are gold-plated for improved connectivity and...

$9.95

42 IN STOCK

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Red

PRODUCT ID: 2605

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana...

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Red version . Check out different colors and sizes here. The Minigrabber Clip to Banana Plug is a great way to test and connect without...

$6.95

20 IN STOCK

USB Complete: The Developer's Guide by Jan Axelson - Fifth Edition

PRODUCT ID: 3087

Put USB to work in your designs with USB Complete: The Developer's Guide ! This book bridges the gap between the technical specifications...

Put USB to work in your designs with USB Complete: The Developer's Guide ! This book bridges the gap between the technical specifications and the real world of designing and programming devices that connect over the Universal Serial Bus. This is Ladyada's favorite protocol book, and is great at explaining USB at a low level. As the most versatile computer interface around, USB can handle just about any peripheral function you can...

$49.95

9 IN STOCK

DIY RCA Plug - 3 Pack

PRODUCT ID: 2882

RCAs are some of our favorite plugs. Easy to use and easy to handle. They're one of those plugs that everyone has fond memory of...

RCAs are some of our favorite plugs. Easy to use and easy to handle. They're one of those plugs that everyone has fond memory of using. Our favorite memory was when we accidentally plugged the composite video plug into one of the stereo jacks and our TV made a loud noise - classic! This three-pack of RCA plugs comes with everything you need to make your own RCA plug memories. It includes a red, yellow and...

$3.95

IN STOCK

S-Video Cable - 6 feet

PRODUCT ID: 1380

This basic cable comes with two S-Video MiniDIN-4 connectors. It's fairly straight forward, you'll commonly need these to connect two S-Video...

This basic cable comes with two S-Video MiniDIN-4 connectors. It's fairly straight forward, you'll commonly need these to connect two S-Video devices together. Works great with the Uzebox kit when you want better quality than Composite. Cable is 6 ft long. S-Video Cable - 9 feet (1:07)

$1.95

48 IN STOCK

2-pin JST SM In-line power wire connector (female)

PRODUCT ID: 318

If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable...

If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable assembly that latches strongly. One wire is marked with a white dashed line. You can't plug these in backwards. We use these mostly for EL wire. This is the same connector as is on the inverter. It's useful if you're making a Y-connector or want to attach EL wire to some other kind of...

$0.75

DISCONTINUED

2-pin JST SM In-line power wire connector (male)

PRODUCT ID: 319

If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable...

If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable assembly that latches strongly. One wire is marked with a white dashed line. You can't plug these in backwards. This is the matching connector to the inverter. It is required to connect EL wire to the inverter! 0.1" (2.54mm) pitch JST SM connector on the end Please note these are designed...

$0.75

DISCONTINUED

CHARGECARD Thin Lightning Cable for iPhone 5

PRODUCT ID: 1472

Whether you're flying high, driving far, or out on the town with your friends, you'll never be without a charged phone again. You leave the...

Whether you're flying high, driving far, or out on the town with your friends, you'll never be without a charged phone again. You leave the house with your keys, phone, wallet, and CHARGECARD, the jumper cable for your phone. Features: Standard USB Charge/Sync Anywhere 2.5mm Thick Durable, Flexible Plastic Flexible Link for 360º Plug Movement Plug Snaps Hold Cable Securely Works with all Lightning versions of iPhone / iPad / iPod...

$24.95

DISCONTINUED

CHARGECARD Thin Micro USB for Android / Device Charging Cable

PRODUCT ID: 1470

Whether you're flying high, driving far, or out on the town with your friends, you'll never be without a charged phone again. You leave the...

$24.95

DISCONTINUED

CHARGECARD Ultra-thin USB Cable for iPhone 4/4S (30 pin Connect)

PRODUCT ID: 1473

The Thinnest USB Cable for iPhone 4/4s! ChargeCard fits in your wallet, so it's with you when you need it, and out of the way when you don't....

The Thinnest USB Cable for iPhone 4/4s! ChargeCard fits in your wallet, so it's with you when you need it, and out of the way when you don't. Features: Standard USB plug for power and data transfer Credit card sized, and only 0.1" thck Rubber tongue allows full range of motion USB plug snaps securely in place CHARGECARD Ultra-thin USB Cable for iPhone 4/4S (30 pin Connect) (21:09)

$24.95

DISCONTINUED

USB DIY Slim Connector Shell - USB Type A Socket/Female

PRODUCT ID: 1828

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside This is the 'slim' version of the DIY...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside This is the 'slim' version of the DIY USB-A Female connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a modern look. We also carry the slim size in USB-A male, miniB plug, microB male and USB-microB female. Normal DIY "USB shells" are...

$0.95

DISCONTINUED

4-pin JST SM Receptacle Cable

PRODUCT ID: 579

This cable product is no longer sold individually. We now only have them in set pairs for the same price! Get them here. This 4-wire cable is 20cm...

This cable product is no longer sold individually. We now only have them in set pairs for the same price! Get them here. This 4-wire cable is 20cm long and has a JST SM type connector receptacle on the end. It mates with the JST SM plug cable and is good for whenever you have 4 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For...

$1.50

DISCONTINUED

Toroid Slip Ring - 2.1" OD 1/2" ID, 6 wires, max 240V @ 5A

PRODUCT ID: 776

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. This is a toroidal slip ring - a more expensive type of slip ring. Unlike the other capsule-type 'rings, this one has a through-bore hole in the center with a...

$99.95

DISCONTINUED