<![CDATA[hashcat Forum - All Forums]]> https://hashcat.net/forum/ Thu, 06 Feb 2025 02:04:01 +0000 MyBB <![CDATA[Trying all case permutations for all alphabetical letters of a password?]]> https://hashcat.net/forum/thread-12497.html Tue, 04 Feb 2025 21:15:05 +0000 42]]> https://hashcat.net/forum/thread-12497.html
We have a password of 24 characters with mixed upper and lower case characters, numbers and punctuation.

I want to try a mask attack of all possible upper/lower case permutations of each alphabetical character in the password e.g. say the password is:

ThisIsA24CharacterPassw0

Then it should do a mask of all the A..Z an a..z characters and try ever case modulation option on each of them.

Currently mask attacks allow for:

?l = abcdefghijklmnopqrstuvwxyz
?u = ABCDEFGHIJKLMNOPQRSTUVWXYZ
?d = 0123456789
?h = 0123456789abcdef
?H = 0123456789ABCDEF
?s = «space»!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
?a = ?l?u?d?s
?b = 0x00 - 0xff

So one more like:

?aC

Which would try a and A in that position so both upper and lower case of the letter a in this case the mask input needs to be 3 characters to allow the user to input the initial character that should be tried in all its case varients.

So it would be something like:

?TC?hC?iC?sC?IC?sC?AC24?CC?hC?aC?rC?aC?cC?tC?eC?rC?PC?aC?sC?sC?wC0

I can't see any simple way to do this in Hashcat presently without a complex additional Python script and I find it strange that a "case-toggling" mask is not available?

Let me know your thoughts, if this could be implemented or perhaps there is already a simple way to implement this?

Kindest wishes,

Martin]]>
We have a password of 24 characters with mixed upper and lower case characters, numbers and punctuation.

I want to try a mask attack of all possible upper/lower case permutations of each alphabetical character in the password e.g. say the password is:

ThisIsA24CharacterPassw0

Then it should do a mask of all the A..Z an a..z characters and try ever case modulation option on each of them.

Currently mask attacks allow for:

?l = abcdefghijklmnopqrstuvwxyz
?u = ABCDEFGHIJKLMNOPQRSTUVWXYZ
?d = 0123456789
?h = 0123456789abcdef
?H = 0123456789ABCDEF
?s = «space»!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
?a = ?l?u?d?s
?b = 0x00 - 0xff

So one more like:

?aC

Which would try a and A in that position so both upper and lower case of the letter a in this case the mask input needs to be 3 characters to allow the user to input the initial character that should be tried in all its case varients.

So it would be something like:

?TC?hC?iC?sC?IC?sC?AC24?CC?hC?aC?rC?aC?cC?tC?eC?rC?PC?aC?sC?sC?wC0

I can't see any simple way to do this in Hashcat presently without a complex additional Python script and I find it strange that a "case-toggling" mask is not available?

Let me know your thoughts, if this could be implemented or perhaps there is already a simple way to implement this?

Kindest wishes,

Martin]]> <![CDATA[Truecrypt backup header?]]> https://hashcat.net/forum/thread-12495.html Mon, 03 Feb 2025 22:12:50 +0000 42]]> https://hashcat.net/forum/thread-12495.html
I'm working on a standard TrueCrypt container and managed to extract the header (and header hashes) with:

dd if=container of=container.hash bs=512 count=1

That's the 1st 512 bytes and the extracted "hash" i.e. header file works just fine with the known password of a container I test it with (same result as with the container).

Now I would like to do the same with the backup header, it seems from forums it is subposed to be at the last 512 bytes of the container but this does not bear fruit.

I am wondering if anyone has experience with this and knows the exact location of the backup header for a default setting TrueCrupt container?

Many thanks!

Martin]]>
I'm working on a standard TrueCrypt container and managed to extract the header (and header hashes) with:

dd if=container of=container.hash bs=512 count=1

That's the 1st 512 bytes and the extracted "hash" i.e. header file works just fine with the known password of a container I test it with (same result as with the container).

Now I would like to do the same with the backup header, it seems from forums it is subposed to be at the last 512 bytes of the container but this does not bear fruit.

I am wondering if anyone has experience with this and knows the exact location of the backup header for a default setting TrueCrupt container?

Many thanks!

Martin]]> <![CDATA[stdout problem...]]> https://hashcat.net/forum/thread-12494.html Mon, 03 Feb 2025 14:38:03 +0000 zamgold]]> https://hashcat.net/forum/thread-12494.html
for example I have two rule files:

case_u.rule:
u

and

case_l.rule:
l

When I run the script:
hashcat --stdout -a 0 my.dic -r case_u.rule -o out1.dic

and other script:
hashcat --stdout -a 0 my.dic -r case_l.rule -o out2.dic


Files out1.dic and out2.dic files have different number of lines in the output of the work...
Why does this happen?
All three files must have the same number of lines!]]>
for example I have two rule files:

case_u.rule:
u

and

case_l.rule:
l

When I run the script:
hashcat --stdout -a 0 my.dic -r case_u.rule -o out1.dic

and other script:
hashcat --stdout -a 0 my.dic -r case_l.rule -o out2.dic


Files out1.dic and out2.dic files have different number of lines in the output of the work...
Why does this happen?
All three files must have the same number of lines!]]> <![CDATA[Blockchain V0 Recovery Issue]]> https://hashcat.net/forum/thread-12493.html Mon, 03 Feb 2025 06:47:28 +0000 rrossman]]> https://hashcat.net/forum/thread-12493.html
I'm trying to recover an old Blockchain.info (Bitcoin) wallet from many years ago and need some help. After doing some research, I came across this GitHub issue, which suggests that v0 wallets are not cracking correctly due to differences in decryption modes.

I’ve already:
  • Retrieved my wallet hash using the blockchain2john script.
  • Compiled a list of possible passwords in a text file.
  • Run Hashcat with various built-in and third-party rules.

I’m almost certain my password is in the candidate list, but I believe that due to the decryption issue, I haven’t had any success. Based on the discussion in the GitHub thread, it seems that OFB mode needs to be implemented instead of CBC and the encryption rounds need to be decreased to properly decrypt Blockchain v0 wallets. I'm not familiar enough with Hashcat’s internals to make these changes myself, but I’d be happy to pay for assistance—either upfront or as a percentage of recovered funds. If modifying the Hashcat source code to support this is possible, even just a one-off build, I’d greatly appreciate it.

If you're knowledgeable about this and think you can help, please send me a direct message.

Thank you.
rrossman]]>
I'm trying to recover an old Blockchain.info (Bitcoin) wallet from many years ago and need some help. After doing some research, I came across this GitHub issue, which suggests that v0 wallets are not cracking correctly due to differences in decryption modes.

I’ve already:
  • Retrieved my wallet hash using the blockchain2john script.
  • Compiled a list of possible passwords in a text file.
  • Run Hashcat with various built-in and third-party rules.

I’m almost certain my password is in the candidate list, but I believe that due to the decryption issue, I haven’t had any success. Based on the discussion in the GitHub thread, it seems that OFB mode needs to be implemented instead of CBC and the encryption rounds need to be decreased to properly decrypt Blockchain v0 wallets. I'm not familiar enough with Hashcat’s internals to make these changes myself, but I’d be happy to pay for assistance—either upfront or as a percentage of recovered funds. If modifying the Hashcat source code to support this is possible, even just a one-off build, I’d greatly appreciate it.

If you're knowledgeable about this and think you can help, please send me a direct message.

Thank you.
rrossman]]> <![CDATA[NVIDIA GeForce RTX 5080 Benchmark]]> https://hashcat.net/forum/thread-12492.html Sun, 02 Feb 2025 23:59:46 +0000 digi]]> https://hashcat.net/forum/thread-12492.html
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
CUDA API (CUDA 12.8)
====================
* Device #1: NVIDIA GeForce RTX 5080, 14867/16302 MB, 84MCU

OpenCL API (OpenCL 3.0 PoCL 6.0+debian  Linux, None+Asserts, RELOC, LLVM 17.0.6, SLEEF, DISTRO, POCL_DEBUG) - Platform #1 [The pocl project]
============================================================================================================================================
* Device #2: cpu-haswell-AMD Ryzen Threadripper 3960X 24-Core Processor, 31061/62187 MB (8192 MB allocatable), 48MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable

-------------------
* Hash-Mode 0 (MD5)
-------------------

Speed.#1.........:  104.8 GH/s (53.38ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  3795.8 MH/s (11.88ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  108.6 GH/s

----------------------
* Hash-Mode 100 (SHA1)
----------------------

Speed.#1.........: 34045.2 MH/s (82.43ms) @ Accel:128 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1698.2 MH/s (28.20ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 35743.4 MH/s

---------------------------
* Hash-Mode 1400 (SHA2-256)
---------------------------

Speed.#1.........: 13567.2 MH/s (51.56ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  605.4 MH/s (81.58ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 14172.6 MH/s

---------------------------
* Hash-Mode 1700 (SHA2-512)
---------------------------

Speed.#1.........:  4933.9 MH/s (71.03ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:  214.7 MH/s (57.19ms) @ Accel:256 Loops:1024 Thr:1 Vec:4
Speed.#*.........:  5148.6 MH/s

-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------

Speed.#1.........:  1627.2 kH/s (51.96ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:    86654 H/s (67.45ms) @ Accel:512 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  1713.9 kH/s

-----------------------
* Hash-Mode 1000 (NTLM)
-----------------------

Speed.#1.........:  164.5 GH/s (33.97ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  6120.1 MH/s (6.87ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  170.6 GH/s

---------------------
* Hash-Mode 3000 (LM)
---------------------

Speed.#1.........: 88534.5 MH/s (15.15ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  889.5 MH/s (54.49ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 89424.0 MH/s

--------------------------------------------
* Hash-Mode 5500 (NetNTLMv1 / NetNTLMv1+ESS)
--------------------------------------------

Speed.#1.........: 94459.2 MH/s (29.48ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#2.........:  3752.5 MH/s (12.04ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 98211.7 MH/s

----------------------------
* Hash-Mode 5600 (NetNTLMv2)
----------------------------

Speed.#1.........:  7446.8 MH/s (46.89ms) @ Accel:64 Loops:256 Thr:256 Vec:1
Speed.#2.........:  257.7 MH/s (47.35ms) @ Accel:1024 Loops:256 Thr:1 Vec:8
Speed.#*.........:  7704.5 MH/s

--------------------------------------------------------
* Hash-Mode 1500 (descrypt, DES (Unix), Traditional DES)
--------------------------------------------------------

Speed.#1.........:  3783.0 MH/s (92.31ms) @ Accel:32 Loops:1024 Thr:128 Vec:1
Speed.#2.........: 31654.6 kH/s (97.14ms) @ Accel:64 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  3814.6 MH/s

------------------------------------------------------------------------------
* Hash-Mode 500 (md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5)) [Iterations: 1000]
------------------------------------------------------------------------------

Speed.#1.........: 43863.7 kH/s (54.37ms) @ Accel:32 Loops:1000 Thr:1024 Vec:1
Speed.#2.........:  334.1 kH/s (68.65ms) @ Accel:1024 Loops:500 Thr:1 Vec:8
Speed.#*.........: 44197.8 kH/s

----------------------------------------------------------------
* Hash-Mode 3200 (bcrypt $2*$, Blowfish (Unix)) [Iterations: 32]
----------------------------------------------------------------

Speed.#1.........:  124.4 kH/s (52.94ms) @ Accel:4 Loops:32 Thr:24 Vec:1
Speed.#2.........:    23277 H/s (42.63ms) @ Accel:48 Loops:16 Thr:1 Vec:1
Speed.#*.........:  147.7 kH/s

--------------------------------------------------------------------
* Hash-Mode 1800 (sha512crypt $6$, SHA512 (Unix)) [Iterations: 5000]
--------------------------------------------------------------------

Speed.#1.........:  775.9 kH/s (66.50ms) @ Accel:8192 Loops:512 Thr:64 Vec:1
Speed.#2.........:    14689 H/s (12.08ms) @ Accel:1024 Loops:1024 Thr:1 Vec:4
Speed.#*.........:  790.6 kH/s

--------------------------------------------------------
* Hash-Mode 7500 (Kerberos 5, etype 23, AS-REQ Pre-Auth)
--------------------------------------------------------

Speed.#1.........:  1948.6 MH/s (89.79ms) @ Accel:512 Loops:128 Thr:32 Vec:1
Speed.#2.........: 28617.4 kH/s (53.55ms) @ Accel:256 Loops:128 Thr:1 Vec:8
Speed.#*.........:  1977.2 MH/s

-------------------------------------------------
* Hash-Mode 13100 (Kerberos 5, etype 23, TGS-REP)
-------------------------------------------------

Speed.#1.........:  1964.1 MH/s (89.33ms) @ Accel:512 Loops:128 Thr:32 Vec:1
Speed.#2.........: 29068.8 kH/s (52.64ms) @ Accel:32 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  1993.2 MH/s

---------------------------------------------------------------------------------
* Hash-Mode 15300 (DPAPI masterkey file v1 (context 1 and 2)) [Iterations: 23999]
---------------------------------------------------------------------------------

Speed.#1.........:  274.3 kH/s (51.58ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:    14341 H/s (71.43ms) @ Accel:1024 Loops:512 Thr:1 Vec:8
Speed.#*.........:  288.6 kH/s

---------------------------------------------------------------------------------
* Hash-Mode 15900 (DPAPI masterkey file v2 (context 1 and 2)) [Iterations: 12899]
---------------------------------------------------------------------------------

Speed.#1.........:  152.2 kH/s (86.55ms) @ Accel:128 Loops:512 Thr:32 Vec:1
Speed.#2.........:    7721 H/s (59.80ms) @ Accel:256 Loops:512 Thr:1 Vec:4
Speed.#*.........:  159.9 kH/s

------------------------------------------------------------------
* Hash-Mode 7100 (macOS v10.8+ (PBKDF2-SHA512)) [Iterations: 1023]
------------------------------------------------------------------

Speed.#1.........:  1973.9 kH/s (82.51ms) @ Accel:4 Loops:1023 Thr:512 Vec:1
Speed.#2.........:    96349 H/s (39.70ms) @ Accel:256 Loops:511 Thr:1 Vec:4
Speed.#*.........:  2070.2 kH/s

---------------------------------------------
* Hash-Mode 11600 (7-Zip) [Iterations: 16384]
---------------------------------------------

Speed.#1.........:  1616.8 kH/s (99.25ms) @ Accel:256 Loops:4096 Thr:32 Vec:1
Speed.#2.........:    23107 H/s (62.93ms) @ Accel:128 Loops:4096 Thr:1 Vec:8
Speed.#*.........:  1639.9 kH/s

------------------------------------------------
* Hash-Mode 12500 (RAR3-hp) [Iterations: 262144]
------------------------------------------------

Speed.#1.........:  223.9 kH/s (95.54ms) @ Accel:16 Loops:16384 Thr:256 Vec:1
Speed.#2.........:    1257 H/s (1.89ms) @ Accel:64 Loops:16384 Thr:1 Vec:8
Speed.#*.........:  225.1 kH/s

--------------------------------------------
* Hash-Mode 13000 (RAR5) [Iterations: 32799]
--------------------------------------------

Speed.#1.........:  166.3 kH/s (62.33ms) @ Accel:128 Loops:1024 Thr:32 Vec:1
Speed.#2.........:    7995 H/s (91.92ms) @ Accel:512 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  174.3 kH/s

--------------------------------------------------------------------------------
* Hash-Mode 6211 (TrueCrypt RIPEMD160 + XTS 512 bit (legacy)) [Iterations: 1999]
--------------------------------------------------------------------------------

Speed.#1.........:  1212.7 kH/s (63.28ms) @ Accel:2 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:    57312 H/s (50.69ms) @ Accel:256 Loops:512 Thr:1 Vec:8
Speed.#*.........:  1270.0 kH/s

-----------------------------------------------------------------------------------
* Hash-Mode 13400 (KeePass 1 (AES/Twofish) and KeePass 2 (AES)) [Iterations: 24569]
-----------------------------------------------------------------------------------

Speed.#1.........:  209.1 kH/s (68.23ms) @ Accel:64 Loops:256 Thr:256 Vec:1
Speed.#2.........:    7199 H/s (69.61ms) @ Accel:256 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  216.3 kH/s

----------------------------------------------------------------
* Hash-Mode 6800 (LastPass + LastPass sniffed) [Iterations: 499]
----------------------------------------------------------------

Speed.#1.........:  9990.4 kH/s (63.65ms) @ Accel:256 Loops:499 Thr:32 Vec:1
Speed.#2.........:  496.0 kH/s (88.90ms) @ Accel:1024 Loops:499 Thr:1 Vec:8
Speed.#*.........: 10486.4 kH/s

--------------------------------------------------------------------
* Hash-Mode 11300 (Bitcoin/Litecoin wallet.dat) [Iterations: 200459]
--------------------------------------------------------------------

Speed.#1.........:    21274 H/s (82.04ms) @ Accel:32 Loops:128 Thr:1024 Vec:1
Speed.#2.........:      928 H/s (66.35ms) @ Accel:256 Loops:1024 Thr:1 Vec:4
Speed.#*.........:    22202 H/s

Started: Sun Feb  2 16:51:16 2025
Stopped: Sun Feb  2 16:57:07 2025]]>
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
CUDA API (CUDA 12.8)
====================
* Device #1: NVIDIA GeForce RTX 5080, 14867/16302 MB, 84MCU

OpenCL API (OpenCL 3.0 PoCL 6.0+debian  Linux, None+Asserts, RELOC, LLVM 17.0.6, SLEEF, DISTRO, POCL_DEBUG) - Platform #1 [The pocl project]
============================================================================================================================================
* Device #2: cpu-haswell-AMD Ryzen Threadripper 3960X 24-Core Processor, 31061/62187 MB (8192 MB allocatable), 48MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable

-------------------
* Hash-Mode 0 (MD5)
-------------------

Speed.#1.........:  104.8 GH/s (53.38ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  3795.8 MH/s (11.88ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  108.6 GH/s

----------------------
* Hash-Mode 100 (SHA1)
----------------------

Speed.#1.........: 34045.2 MH/s (82.43ms) @ Accel:128 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1698.2 MH/s (28.20ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 35743.4 MH/s

---------------------------
* Hash-Mode 1400 (SHA2-256)
---------------------------

Speed.#1.........: 13567.2 MH/s (51.56ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  605.4 MH/s (81.58ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 14172.6 MH/s

---------------------------
* Hash-Mode 1700 (SHA2-512)
---------------------------

Speed.#1.........:  4933.9 MH/s (71.03ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:  214.7 MH/s (57.19ms) @ Accel:256 Loops:1024 Thr:1 Vec:4
Speed.#*.........:  5148.6 MH/s

-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------

Speed.#1.........:  1627.2 kH/s (51.96ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:    86654 H/s (67.45ms) @ Accel:512 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  1713.9 kH/s

-----------------------
* Hash-Mode 1000 (NTLM)
-----------------------

Speed.#1.........:  164.5 GH/s (33.97ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:  6120.1 MH/s (6.87ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  170.6 GH/s

---------------------
* Hash-Mode 3000 (LM)
---------------------

Speed.#1.........: 88534.5 MH/s (15.15ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  889.5 MH/s (54.49ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 89424.0 MH/s

--------------------------------------------
* Hash-Mode 5500 (NetNTLMv1 / NetNTLMv1+ESS)
--------------------------------------------

Speed.#1.........: 94459.2 MH/s (29.48ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#2.........:  3752.5 MH/s (12.04ms) @ Accel:1024 Loops:1024 Thr:1 Vec:8
Speed.#*.........: 98211.7 MH/s

----------------------------
* Hash-Mode 5600 (NetNTLMv2)
----------------------------

Speed.#1.........:  7446.8 MH/s (46.89ms) @ Accel:64 Loops:256 Thr:256 Vec:1
Speed.#2.........:  257.7 MH/s (47.35ms) @ Accel:1024 Loops:256 Thr:1 Vec:8
Speed.#*.........:  7704.5 MH/s

--------------------------------------------------------
* Hash-Mode 1500 (descrypt, DES (Unix), Traditional DES)
--------------------------------------------------------

Speed.#1.........:  3783.0 MH/s (92.31ms) @ Accel:32 Loops:1024 Thr:128 Vec:1
Speed.#2.........: 31654.6 kH/s (97.14ms) @ Accel:64 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  3814.6 MH/s

------------------------------------------------------------------------------
* Hash-Mode 500 (md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5)) [Iterations: 1000]
------------------------------------------------------------------------------

Speed.#1.........: 43863.7 kH/s (54.37ms) @ Accel:32 Loops:1000 Thr:1024 Vec:1
Speed.#2.........:  334.1 kH/s (68.65ms) @ Accel:1024 Loops:500 Thr:1 Vec:8
Speed.#*.........: 44197.8 kH/s

----------------------------------------------------------------
* Hash-Mode 3200 (bcrypt $2*$, Blowfish (Unix)) [Iterations: 32]
----------------------------------------------------------------

Speed.#1.........:  124.4 kH/s (52.94ms) @ Accel:4 Loops:32 Thr:24 Vec:1
Speed.#2.........:    23277 H/s (42.63ms) @ Accel:48 Loops:16 Thr:1 Vec:1
Speed.#*.........:  147.7 kH/s

--------------------------------------------------------------------
* Hash-Mode 1800 (sha512crypt $6$, SHA512 (Unix)) [Iterations: 5000]
--------------------------------------------------------------------

Speed.#1.........:  775.9 kH/s (66.50ms) @ Accel:8192 Loops:512 Thr:64 Vec:1
Speed.#2.........:    14689 H/s (12.08ms) @ Accel:1024 Loops:1024 Thr:1 Vec:4
Speed.#*.........:  790.6 kH/s

--------------------------------------------------------
* Hash-Mode 7500 (Kerberos 5, etype 23, AS-REQ Pre-Auth)
--------------------------------------------------------

Speed.#1.........:  1948.6 MH/s (89.79ms) @ Accel:512 Loops:128 Thr:32 Vec:1
Speed.#2.........: 28617.4 kH/s (53.55ms) @ Accel:256 Loops:128 Thr:1 Vec:8
Speed.#*.........:  1977.2 MH/s

-------------------------------------------------
* Hash-Mode 13100 (Kerberos 5, etype 23, TGS-REP)
-------------------------------------------------

Speed.#1.........:  1964.1 MH/s (89.33ms) @ Accel:512 Loops:128 Thr:32 Vec:1
Speed.#2.........: 29068.8 kH/s (52.64ms) @ Accel:32 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  1993.2 MH/s

---------------------------------------------------------------------------------
* Hash-Mode 15300 (DPAPI masterkey file v1 (context 1 and 2)) [Iterations: 23999]
---------------------------------------------------------------------------------

Speed.#1.........:  274.3 kH/s (51.58ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
Speed.#2.........:    14341 H/s (71.43ms) @ Accel:1024 Loops:512 Thr:1 Vec:8
Speed.#*.........:  288.6 kH/s

---------------------------------------------------------------------------------
* Hash-Mode 15900 (DPAPI masterkey file v2 (context 1 and 2)) [Iterations: 12899]
---------------------------------------------------------------------------------

Speed.#1.........:  152.2 kH/s (86.55ms) @ Accel:128 Loops:512 Thr:32 Vec:1
Speed.#2.........:    7721 H/s (59.80ms) @ Accel:256 Loops:512 Thr:1 Vec:4
Speed.#*.........:  159.9 kH/s

------------------------------------------------------------------
* Hash-Mode 7100 (macOS v10.8+ (PBKDF2-SHA512)) [Iterations: 1023]
------------------------------------------------------------------

Speed.#1.........:  1973.9 kH/s (82.51ms) @ Accel:4 Loops:1023 Thr:512 Vec:1
Speed.#2.........:    96349 H/s (39.70ms) @ Accel:256 Loops:511 Thr:1 Vec:4
Speed.#*.........:  2070.2 kH/s

---------------------------------------------
* Hash-Mode 11600 (7-Zip) [Iterations: 16384]
---------------------------------------------

Speed.#1.........:  1616.8 kH/s (99.25ms) @ Accel:256 Loops:4096 Thr:32 Vec:1
Speed.#2.........:    23107 H/s (62.93ms) @ Accel:128 Loops:4096 Thr:1 Vec:8
Speed.#*.........:  1639.9 kH/s

------------------------------------------------
* Hash-Mode 12500 (RAR3-hp) [Iterations: 262144]
------------------------------------------------

Speed.#1.........:  223.9 kH/s (95.54ms) @ Accel:16 Loops:16384 Thr:256 Vec:1
Speed.#2.........:    1257 H/s (1.89ms) @ Accel:64 Loops:16384 Thr:1 Vec:8
Speed.#*.........:  225.1 kH/s

--------------------------------------------
* Hash-Mode 13000 (RAR5) [Iterations: 32799]
--------------------------------------------

Speed.#1.........:  166.3 kH/s (62.33ms) @ Accel:128 Loops:1024 Thr:32 Vec:1
Speed.#2.........:    7995 H/s (91.92ms) @ Accel:512 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  174.3 kH/s

--------------------------------------------------------------------------------
* Hash-Mode 6211 (TrueCrypt RIPEMD160 + XTS 512 bit (legacy)) [Iterations: 1999]
--------------------------------------------------------------------------------

Speed.#1.........:  1212.7 kH/s (63.28ms) @ Accel:2 Loops:1024 Thr:1024 Vec:1
Speed.#2.........:    57312 H/s (50.69ms) @ Accel:256 Loops:512 Thr:1 Vec:8
Speed.#*.........:  1270.0 kH/s

-----------------------------------------------------------------------------------
* Hash-Mode 13400 (KeePass 1 (AES/Twofish) and KeePass 2 (AES)) [Iterations: 24569]
-----------------------------------------------------------------------------------

Speed.#1.........:  209.1 kH/s (68.23ms) @ Accel:64 Loops:256 Thr:256 Vec:1
Speed.#2.........:    7199 H/s (69.61ms) @ Accel:256 Loops:1024 Thr:1 Vec:8
Speed.#*.........:  216.3 kH/s

----------------------------------------------------------------
* Hash-Mode 6800 (LastPass + LastPass sniffed) [Iterations: 499]
----------------------------------------------------------------

Speed.#1.........:  9990.4 kH/s (63.65ms) @ Accel:256 Loops:499 Thr:32 Vec:1
Speed.#2.........:  496.0 kH/s (88.90ms) @ Accel:1024 Loops:499 Thr:1 Vec:8
Speed.#*.........: 10486.4 kH/s

--------------------------------------------------------------------
* Hash-Mode 11300 (Bitcoin/Litecoin wallet.dat) [Iterations: 200459]
--------------------------------------------------------------------

Speed.#1.........:    21274 H/s (82.04ms) @ Accel:32 Loops:128 Thr:1024 Vec:1
Speed.#2.........:      928 H/s (66.35ms) @ Accel:256 Loops:1024 Thr:1 Vec:4
Speed.#*.........:    22202 H/s

Started: Sun Feb  2 16:51:16 2025
Stopped: Sun Feb  2 16:57:07 2025]]> <![CDATA[Doubts about RAR5 hash]]> https://hashcat.net/forum/thread-12491.html Sun, 02 Feb 2025 17:59:50 +0000 ¡Lebl@nc]]> https://hashcat.net/forum/thread-12491.html

.png   Screenshot 2025-02-02 125251.png (Size: 369.41 KB / Downloads: 9)

I own a Radeon RX 6750 XT.

I got the RAR5 hash through John the ripper.

Any thoughts on what can I do to get this done the right way?]]>

.png   Screenshot 2025-02-02 125251.png (Size: 369.41 KB / Downloads: 9)

I own a Radeon RX 6750 XT.

I got the RAR5 hash through John the ripper.

Any thoughts on what can I do to get this done the right way?]]> <![CDATA[Separator unmatched error]]> https://hashcat.net/forum/thread-12489.html Sat, 01 Feb 2025 18:15:20 +0000 LeoBarga]]> https://hashcat.net/forum/thread-12489.html
I'm currently following a tutorial of someone doing a "Capture the flag" on a VM and i got completely stuck because of a "Seprator unmatched" error. 
Everything i'm doing is on this site (https://www.cybersecurity360.it/cultura-...-software/), i know the site is not in english but it doesn't really matter, it's just to show the hash since it's public and just for training purpose.

At a certain point of this tutorial you get the hash 000e084XXXXX302eae4559dXXXb520c:0cbb5be2XXX4bed573802eXXXXX9965 (this is masked with the Xs because of forum rules but on the site there is full one). He then proceeds to put it inside a txt file and run this on windows:  
Code:
hashcat-cli64.exe -m 20 -a 0 c:toolsHlegacyHASH_NORTH.txt c:toolswlistrockyou.txt
wich works and returns password "stark". 

I tried to replicate this on linux by running 
Code:
hashcat -m 20 -a 0 myhash.txt common.txt
but i get the separator unmatched error. 

The post about this error that i previously mentioned suggested to:
  • check again for syntax, wich i did (hopefully correctly);
  • making sure the first file is the one containg the hash (wich i did, that file contains one line with the hash and both that file and common.txt are in my pwd just to make sure);
  • check the example_hashes, wich is the only thing that actually gave me some doubts since in the example after the ":" in the hash there are only numbers, no letters. But i'm not sure if that is the problem since by running it on windows like the tutorial did it works fine with that hash.

I'm a beginner and i've really looked everywhere for a solution but i honestly don't know how to proceed, i really can't see what i'm doing wrong with this and the previous post wasn't of any help.
Thank you all in advance.]]>
I'm currently following a tutorial of someone doing a "Capture the flag" on a VM and i got completely stuck because of a "Seprator unmatched" error. 
Everything i'm doing is on this site (https://www.cybersecurity360.it/cultura-...-software/), i know the site is not in english but it doesn't really matter, it's just to show the hash since it's public and just for training purpose.

At a certain point of this tutorial you get the hash 000e084XXXXX302eae4559dXXXb520c:0cbb5be2XXX4bed573802eXXXXX9965 (this is masked with the Xs because of forum rules but on the site there is full one). He then proceeds to put it inside a txt file and run this on windows:  
Code:
hashcat-cli64.exe -m 20 -a 0 c:toolsHlegacyHASH_NORTH.txt c:toolswlistrockyou.txt
wich works and returns password "stark". 

I tried to replicate this on linux by running 
Code:
hashcat -m 20 -a 0 myhash.txt common.txt
but i get the separator unmatched error. 

The post about this error that i previously mentioned suggested to:
  • check again for syntax, wich i did (hopefully correctly);
  • making sure the first file is the one containg the hash (wich i did, that file contains one line with the hash and both that file and common.txt are in my pwd just to make sure);
  • check the example_hashes, wich is the only thing that actually gave me some doubts since in the example after the ":" in the hash there are only numbers, no letters. But i'm not sure if that is the problem since by running it on windows like the tutorial did it works fine with that hash.

I'm a beginner and i've really looked everywhere for a solution but i honestly don't know how to proceed, i really can't see what i'm doing wrong with this and the previous post wasn't of any help.
Thank you all in advance.]]> <![CDATA[[Benchmark] GeForce RTX 5090]]> https://hashcat.net/forum/thread-12487.html Tue, 28 Jan 2025 07:29:24 +0000 afd]]> https://hashcat.net/forum/thread-12487.html Quote:https://x.com/eTeknix/status/1882477278648840206
Code:
hashcat (v6.2.6) starting in benchmark mode

hiprtcCompileProgram is missing from HIPRTC shared library.

Successfully initialized the NVIDIA main driver CUDA runtime library.

Failed to initialize NVIDIA RTC library.

* Device #1: CUDA SDK Toolkit not installed or incorrectly installed.
            CUDA SDK Toolkit required for proper device support and utilization.
            Falling back to OpenCL runtime.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

OpenCL API (OpenCL 3.0 CUDA 12.8.51) - Platform #1 [NVIDIA Corporation]
=======================================================================
* Device #1: NVIDIA GeForce RTX 5090, 32512/32606 MB (8151 MB allocatable), 170MCU

OpenCL API (OpenCL 2.1 AMD-APP (3628.0)) - Platform #2 [Advanced Micro Devices, Inc.]
=====================================================================================
* Device #2: AMD Radeon(TM) Graphics, 6176/12460 MB (5077 MB allocatable), 1MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable
* --workload-profile=4

-------------------
* Hash-Mode 0 (MD5)
-------------------

Speed.#1.........:  197.4 GH/s (3.51ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1489.2 MH/s (179.58ms) @ Accel:2048 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  198.9 GH/s

----------------------
* Hash-Mode 100 (SHA1)
----------------------

Speed.#1.........: 67033.4 MH/s (10.45ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  563.7 MH/s (474.71ms) @ Accel:1024 Loops:1024 Thr:256 Vec:1
Speed.#*.........: 67597.1 MH/s

---------------------------
* Hash-Mode 1400 (SHA2-256)
---------------------------

Speed.#1.........: 27190.7 MH/s (25.82ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  234.9 MH/s (284.89ms) @ Accel:512 Loops:512 Thr:256 Vec:1
Speed.#*.........: 27425.6 MH/s

---------------------------
* Hash-Mode 1700 (SHA2-512)
---------------------------

Speed.#1.........:  8829.2 MH/s (80.19ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........: 55152.2 kH/s (303.54ms) @ Accel:128 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  8884.4 MH/s

-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------

Speed.#1.........:  3173.3 kH/s (51.00ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    28559 H/s (284.31ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  3201.8 kH/s

-----------------------
* Hash-Mode 1000 (NTLM)
-----------------------

Speed.#1.........:  300.0 GH/s (2.26ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  2722.5 MH/s (97.95ms) @ Accel:1024 Loops:1024 Thr:256 Vec:1
Speed.#*.........:  302.7 GH/s

---------------------
* Hash-Mode 3000 (LM)
---------------------

Speed.#1.........:  210.3 GH/s (3.24ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1433.4 MH/s (186.43ms) @ Accel:4096 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  211.7 GH/s

--------------------------------------------
* Hash-Mode 5500 (NetNTLMv1 / NetNTLMv1+ESS)
--------------------------------------------

Speed.#1.........:  171.2 GH/s (3.89ms) @ Accel:32 Loops:1024 Thr:128 Vec:1
Speed.#2.........:  1725.7 MH/s (154.70ms) @ Accel:4096 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  173.0 GH/s

----------------------------
* Hash-Mode 5600 (NetNTLMv2)
----------------------------

Speed.#1.........: 15916.6 MH/s (44.36ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  103.0 MH/s (324.72ms) @ Accel:2048 Loops:256 Thr:64 Vec:1
Speed.#*.........: 16019.7 MH/s

--------------------------------------------------------
* Hash-Mode 1500 (descrypt, DES (Unix), Traditional DES)
--------------------------------------------------------

Speed.#1.........:  8762.1 MH/s (80.67ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........: 37928.3 kH/s (441.33ms) @ Accel:256 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  8800.0 MH/s

------------------------------------------------------------------------------
* Hash-Mode 500 (md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5)) [Iterations: 1000]
------------------------------------------------------------------------------

Speed.#1.........: 22865.5 kH/s (12.37ms) @ Accel:16 Loops:1000 Thr:256 Vec:1
Speed.#2.........:  635.5 kH/s (396.08ms) @ Accel:8192 Loops:1000 Thr:32 Vec:1
Speed.#*.........: 23501.0 kH/s

----------------------------------------------------------------
* Hash-Mode 3200 (bcrypt $2*$, Blowfish (Unix)) [Iterations: 32]
----------------------------------------------------------------

Speed.#1.........:  307.8 kH/s (375.36ms) @ Accel:64 Loops:32 Thr:11 Vec:1
Speed.#2.........:    1624 H/s (306.24ms) @ Accel:32 Loops:32 Thr:16 Vec:1
Speed.#*.........:  309.5 kH/s

--------------------------------------------------------------------
* Hash-Mode 1800 (sha512crypt $6$, SHA512 (Unix)) [Iterations: 5000]
--------------------------------------------------------------------

Speed.#1.........:  859.9 kH/s (57.05ms) @ Accel:2048 Loops:1024 Thr:128 Vec:1
Speed.#2.........:    10560 H/s (306.48ms) @ Accel:256 Loops:512 Thr:128 Vec:1
Speed.#*.........:  870.5 kH/s

--------------------------------------------------------
* Hash-Mode 7500 (Kerberos 5, etype 23, AS-REQ Pre-Auth)
--------------------------------------------------------

Speed.#1.........:  4136.6 MH/s (344.53ms) @ Accel:256 Loops:1024 Thr:32 Vec:1
Speed.#2.........: 27303.3 kH/s (306.88ms) @ Accel:1024 Loops:256 Thr:32 Vec:1
Speed.#*.........:  4163.9 MH/s

-------------------------------------------------
* Hash-Mode 13100 (Kerberos 5, etype 23, TGS-REP)
-------------------------------------------------

Speed.#1.........:  4133.6 MH/s (344.71ms) @ Accel:512 Loops:512 Thr:32 Vec:1
Speed.#2.........: 26408.4 kH/s (317.23ms) @ Accel:1024 Loops:256 Thr:32 Vec:1
Speed.#*.........:  4160.0 MH/s

---------------------------------------------------------------------------------
* Hash-Mode 15300 (DPAPI masterkey file v1 (context 1 and 2)) [Iterations: 23999]
---------------------------------------------------------------------------------

Speed.#1.........:  564.2 kH/s (50.48ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    4902 H/s (284.27ms) @ Accel:512 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  569.1 kH/s

---------------------------------------------------------------------------------
* Hash-Mode 15900 (DPAPI masterkey file v2 (context 1 and 2)) [Iterations: 12899]
---------------------------------------------------------------------------------

Speed.#1.........:  343.0 kH/s (154.32ms) @ Accel:128 Loops:1024 Thr:32 Vec:1
Speed.#2.........:    2111 H/s (306.44ms) @ Accel:128 Loops:256 Thr:256 Vec:1
Speed.#*.........:  345.1 kH/s

------------------------------------------------------------------
* Hash-Mode 7100 (macOS v10.8+ (PBKDF2-SHA512)) [Iterations: 1023]
------------------------------------------------------------------

Speed.#1.........:  3817.9 kH/s (163.09ms) @ Accel:16 Loops:1023 Thr:256 Vec:1
Speed.#2.........:    26512 H/s (272.13ms) @ Accel:256 Loops:127 Thr:256 Vec:1
Speed.#*.........:  3844.4 kH/s

---------------------------------------------
* Hash-Mode 11600 (7-Zip) [Iterations: 16384]
---------------------------------------------

Speed.#1.........:  2957.7 kH/s (52.63ms) @ Accel:16 Loops:4096 Thr:256 Vec:1
Speed.#2.........:    32076 H/s (252.41ms) @ Accel:256 Loops:4096 Thr:128 Vec:1
Speed.#*.........:  2989.8 kH/s

------------------------------------------------
* Hash-Mode 12500 (RAR3-hp) [Iterations: 262144]
------------------------------------------------

Speed.#1.........:  219.8 kH/s (31.96ms) @ Accel:16 Loops:16384 Thr:256 Vec:1
Speed.#2.........:    1493 H/s (6.18ms) @ Accel:512 Loops:16384 Thr:64 Vec:1
Speed.#*.........:  221.3 kH/s

--------------------------------------------
* Hash-Mode 13000 (RAR5) [Iterations: 32799]
--------------------------------------------

Speed.#1.........:  339.7 kH/s (60.78ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    2833 H/s (359.75ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  342.5 kH/s

--------------------------------------------------------------------------------
* Hash-Mode 6211 (TrueCrypt RIPEMD160 + XTS 512 bit (legacy)) [Iterations: 1999]
--------------------------------------------------------------------------------

Speed.#1.........:  2043.0 kH/s (139.57ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    18317 H/s (436.16ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#*.........:  2061.3 kH/s

-----------------------------------------------------------------------------------
* Hash-Mode 13400 (KeePass 1 (AES/Twofish) and KeePass 2 (AES)) [Iterations: 24569]
-----------------------------------------------------------------------------------

Speed.#1.........:  435.8 kH/s (65.00ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    3211 H/s (211.98ms) @ Accel:512 Loops:512 Thr:64 Vec:1
Speed.#*.........:  439.1 kH/s

----------------------------------------------------------------
* Hash-Mode 6800 (LastPass + LastPass sniffed) [Iterations: 499]
----------------------------------------------------------------

Speed.#1.........:  8874.7 kH/s (30.00ms) @ Accel:16 Loops:499 Thr:256 Vec:1
Speed.#2.........:  181.2 kH/s (234.22ms) @ Accel:1024 Loops:249 Thr:128 Vec:1
Speed.#*.........:  9055.9 kH/s

--------------------------------------------------------------------
* Hash-Mode 11300 (Bitcoin/Litecoin wallet.dat) [Iterations: 200459]
--------------------------------------------------------------------

Speed.#1.........:    45258 H/s (77.82ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:      274 H/s (304.25ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#*.........:    45532 H/s

Started: Thu Jan 23 17:02:31 2025
Stopped: Thu Jan 23 17:09:56 2025
]]> Quote:https://x.com/eTeknix/status/1882477278648840206
Code:
hashcat (v6.2.6) starting in benchmark mode

hiprtcCompileProgram is missing from HIPRTC shared library.

Successfully initialized the NVIDIA main driver CUDA runtime library.

Failed to initialize NVIDIA RTC library.

* Device #1: CUDA SDK Toolkit not installed or incorrectly installed.
            CUDA SDK Toolkit required for proper device support and utilization.
            Falling back to OpenCL runtime.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

ADL2_Overdrive_Caps(): -8

OpenCL API (OpenCL 3.0 CUDA 12.8.51) - Platform #1 [NVIDIA Corporation]
=======================================================================
* Device #1: NVIDIA GeForce RTX 5090, 32512/32606 MB (8151 MB allocatable), 170MCU

OpenCL API (OpenCL 2.1 AMD-APP (3628.0)) - Platform #2 [Advanced Micro Devices, Inc.]
=====================================================================================
* Device #2: AMD Radeon(TM) Graphics, 6176/12460 MB (5077 MB allocatable), 1MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable
* --workload-profile=4

-------------------
* Hash-Mode 0 (MD5)
-------------------

Speed.#1.........:  197.4 GH/s (3.51ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1489.2 MH/s (179.58ms) @ Accel:2048 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  198.9 GH/s

----------------------
* Hash-Mode 100 (SHA1)
----------------------

Speed.#1.........: 67033.4 MH/s (10.45ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  563.7 MH/s (474.71ms) @ Accel:1024 Loops:1024 Thr:256 Vec:1
Speed.#*.........: 67597.1 MH/s

---------------------------
* Hash-Mode 1400 (SHA2-256)
---------------------------

Speed.#1.........: 27190.7 MH/s (25.82ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  234.9 MH/s (284.89ms) @ Accel:512 Loops:512 Thr:256 Vec:1
Speed.#*.........: 27425.6 MH/s

---------------------------
* Hash-Mode 1700 (SHA2-512)
---------------------------

Speed.#1.........:  8829.2 MH/s (80.19ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........: 55152.2 kH/s (303.54ms) @ Accel:128 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  8884.4 MH/s

-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------

Speed.#1.........:  3173.3 kH/s (51.00ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    28559 H/s (284.31ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  3201.8 kH/s

-----------------------
* Hash-Mode 1000 (NTLM)
-----------------------

Speed.#1.........:  300.0 GH/s (2.26ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  2722.5 MH/s (97.95ms) @ Accel:1024 Loops:1024 Thr:256 Vec:1
Speed.#*.........:  302.7 GH/s

---------------------
* Hash-Mode 3000 (LM)
---------------------

Speed.#1.........:  210.3 GH/s (3.24ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  1433.4 MH/s (186.43ms) @ Accel:4096 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  211.7 GH/s

--------------------------------------------
* Hash-Mode 5500 (NetNTLMv1 / NetNTLMv1+ESS)
--------------------------------------------

Speed.#1.........:  171.2 GH/s (3.89ms) @ Accel:32 Loops:1024 Thr:128 Vec:1
Speed.#2.........:  1725.7 MH/s (154.70ms) @ Accel:4096 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  173.0 GH/s

----------------------------
* Hash-Mode 5600 (NetNTLMv2)
----------------------------

Speed.#1.........: 15916.6 MH/s (44.36ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:  103.0 MH/s (324.72ms) @ Accel:2048 Loops:256 Thr:64 Vec:1
Speed.#*.........: 16019.7 MH/s

--------------------------------------------------------
* Hash-Mode 1500 (descrypt, DES (Unix), Traditional DES)
--------------------------------------------------------

Speed.#1.........:  8762.1 MH/s (80.67ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........: 37928.3 kH/s (441.33ms) @ Accel:256 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  8800.0 MH/s

------------------------------------------------------------------------------
* Hash-Mode 500 (md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5)) [Iterations: 1000]
------------------------------------------------------------------------------

Speed.#1.........: 22865.5 kH/s (12.37ms) @ Accel:16 Loops:1000 Thr:256 Vec:1
Speed.#2.........:  635.5 kH/s (396.08ms) @ Accel:8192 Loops:1000 Thr:32 Vec:1
Speed.#*.........: 23501.0 kH/s

----------------------------------------------------------------
* Hash-Mode 3200 (bcrypt $2*$, Blowfish (Unix)) [Iterations: 32]
----------------------------------------------------------------

Speed.#1.........:  307.8 kH/s (375.36ms) @ Accel:64 Loops:32 Thr:11 Vec:1
Speed.#2.........:    1624 H/s (306.24ms) @ Accel:32 Loops:32 Thr:16 Vec:1
Speed.#*.........:  309.5 kH/s

--------------------------------------------------------------------
* Hash-Mode 1800 (sha512crypt $6$, SHA512 (Unix)) [Iterations: 5000]
--------------------------------------------------------------------

Speed.#1.........:  859.9 kH/s (57.05ms) @ Accel:2048 Loops:1024 Thr:128 Vec:1
Speed.#2.........:    10560 H/s (306.48ms) @ Accel:256 Loops:512 Thr:128 Vec:1
Speed.#*.........:  870.5 kH/s

--------------------------------------------------------
* Hash-Mode 7500 (Kerberos 5, etype 23, AS-REQ Pre-Auth)
--------------------------------------------------------

Speed.#1.........:  4136.6 MH/s (344.53ms) @ Accel:256 Loops:1024 Thr:32 Vec:1
Speed.#2.........: 27303.3 kH/s (306.88ms) @ Accel:1024 Loops:256 Thr:32 Vec:1
Speed.#*.........:  4163.9 MH/s

-------------------------------------------------
* Hash-Mode 13100 (Kerberos 5, etype 23, TGS-REP)
-------------------------------------------------

Speed.#1.........:  4133.6 MH/s (344.71ms) @ Accel:512 Loops:512 Thr:32 Vec:1
Speed.#2.........: 26408.4 kH/s (317.23ms) @ Accel:1024 Loops:256 Thr:32 Vec:1
Speed.#*.........:  4160.0 MH/s

---------------------------------------------------------------------------------
* Hash-Mode 15300 (DPAPI masterkey file v1 (context 1 and 2)) [Iterations: 23999]
---------------------------------------------------------------------------------

Speed.#1.........:  564.2 kH/s (50.48ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    4902 H/s (284.27ms) @ Accel:512 Loops:1024 Thr:64 Vec:1
Speed.#*.........:  569.1 kH/s

---------------------------------------------------------------------------------
* Hash-Mode 15900 (DPAPI masterkey file v2 (context 1 and 2)) [Iterations: 12899]
---------------------------------------------------------------------------------

Speed.#1.........:  343.0 kH/s (154.32ms) @ Accel:128 Loops:1024 Thr:32 Vec:1
Speed.#2.........:    2111 H/s (306.44ms) @ Accel:128 Loops:256 Thr:256 Vec:1
Speed.#*.........:  345.1 kH/s

------------------------------------------------------------------
* Hash-Mode 7100 (macOS v10.8+ (PBKDF2-SHA512)) [Iterations: 1023]
------------------------------------------------------------------

Speed.#1.........:  3817.9 kH/s (163.09ms) @ Accel:16 Loops:1023 Thr:256 Vec:1
Speed.#2.........:    26512 H/s (272.13ms) @ Accel:256 Loops:127 Thr:256 Vec:1
Speed.#*.........:  3844.4 kH/s

---------------------------------------------
* Hash-Mode 11600 (7-Zip) [Iterations: 16384]
---------------------------------------------

Speed.#1.........:  2957.7 kH/s (52.63ms) @ Accel:16 Loops:4096 Thr:256 Vec:1
Speed.#2.........:    32076 H/s (252.41ms) @ Accel:256 Loops:4096 Thr:128 Vec:1
Speed.#*.........:  2989.8 kH/s

------------------------------------------------
* Hash-Mode 12500 (RAR3-hp) [Iterations: 262144]
------------------------------------------------

Speed.#1.........:  219.8 kH/s (31.96ms) @ Accel:16 Loops:16384 Thr:256 Vec:1
Speed.#2.........:    1493 H/s (6.18ms) @ Accel:512 Loops:16384 Thr:64 Vec:1
Speed.#*.........:  221.3 kH/s

--------------------------------------------
* Hash-Mode 13000 (RAR5) [Iterations: 32799]
--------------------------------------------

Speed.#1.........:  339.7 kH/s (60.78ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    2833 H/s (359.75ms) @ Accel:256 Loops:1024 Thr:128 Vec:1
Speed.#*.........:  342.5 kH/s

--------------------------------------------------------------------------------
* Hash-Mode 6211 (TrueCrypt RIPEMD160 + XTS 512 bit (legacy)) [Iterations: 1999]
--------------------------------------------------------------------------------

Speed.#1.........:  2043.0 kH/s (139.57ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    18317 H/s (436.16ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#*.........:  2061.3 kH/s

-----------------------------------------------------------------------------------
* Hash-Mode 13400 (KeePass 1 (AES/Twofish) and KeePass 2 (AES)) [Iterations: 24569]
-----------------------------------------------------------------------------------

Speed.#1.........:  435.8 kH/s (65.00ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:    3211 H/s (211.98ms) @ Accel:512 Loops:512 Thr:64 Vec:1
Speed.#*.........:  439.1 kH/s

----------------------------------------------------------------
* Hash-Mode 6800 (LastPass + LastPass sniffed) [Iterations: 499]
----------------------------------------------------------------

Speed.#1.........:  8874.7 kH/s (30.00ms) @ Accel:16 Loops:499 Thr:256 Vec:1
Speed.#2.........:  181.2 kH/s (234.22ms) @ Accel:1024 Loops:249 Thr:128 Vec:1
Speed.#*.........:  9055.9 kH/s

--------------------------------------------------------------------
* Hash-Mode 11300 (Bitcoin/Litecoin wallet.dat) [Iterations: 200459]
--------------------------------------------------------------------

Speed.#1.........:    45258 H/s (77.82ms) @ Accel:16 Loops:1024 Thr:256 Vec:1
Speed.#2.........:      274 H/s (304.25ms) @ Accel:64 Loops:1024 Thr:256 Vec:1
Speed.#*.........:    45532 H/s

Started: Thu Jan 23 17:02:31 2025
Stopped: Thu Jan 23 17:09:56 2025
]]> <![CDATA[is it possible to generate passwords using python]]> https://hashcat.net/forum/thread-12486.html Sun, 26 Jan 2025 16:32:01 +0000 bretget]]> https://hashcat.net/forum/thread-12486.html
import os
import subprocess
# Функция для установки переменной среды OpenCL
def set_opencl_environment():
    # Укажите путь к библиотеке OpenCL на вашей системе
    # Пример пути для Windows (замените на актуальный путь)
    os.environ['OPENCL_ICD_VENDORS'] = r'C:\Windows\System32\OpenCL.dll'  # Путь к OpenCL на Windows
    # Если у вас другая операционная система, путь будет отличаться

# Функция для запуска hashcat с использованием только CPU или указанной платформы OpenCL
def run_hashcat(hc22000_file, mask):
    # Установим переменную среды для OpenCL
    set_opencl_environment()
    # Указываем путь к hashcat
    hashcat_dir = r"B:\maraduer\hashcat-6.2.6"  # Путь к папке, где находится hashcat

    # Добавляем путь к hashcat в системную переменную PATH
    os.environ["PATH"] += os.pathsep + hashcat_dir
    # Формируем команду для запуска hashcat
    command = [
        "hashcat",
        "-D", "1",  # Принудительно используем только CPU (если GPU не настроено)
        "-m", "22000",  # Режим WPA2
        hc22000_file,  # Путь к файлу .hc22000
        mask  # Маска пароля
    ]
    try:
        # Запуск hashcat
        result = subprocess.run(command, capture_output=True, text=True)
        print(result.stdout)  # Печать вывода
        print(result.stderr)  # Печать ошибок (если есть)
    except Exception as e:
        print(f"[ERROR] Ошибка при запуске hashcat: {e}")
# Генерация паролей и запуск подбора
def generate_passwords_and_crack(hc22000_file):
    """
    Генерация паролей с помощью mask attack и подбора пароля.

    :param hc22000_file: Путь к файлу .hc22000
    """
    # Пример маски: 6 строчных букв и цифры
    mask = "?l?l?l?l?l?l?d?d"  # Маска для 6 символов (буквы и цифры)

    # Запуск функции подбора пароля
    run_hashcat(hc22000_file, mask)
# Пример использования
if __name__ == "__main__":
    hc22000_file = input("Введите путь к файлу .hc22000: ").strip()  # Путь к .hc22000 файлу
    generate_passwords_and_crack(hc22000_file)]]>
import os
import subprocess
# Функция для установки переменной среды OpenCL
def set_opencl_environment():
    # Укажите путь к библиотеке OpenCL на вашей системе
    # Пример пути для Windows (замените на актуальный путь)
    os.environ['OPENCL_ICD_VENDORS'] = r'C:\Windows\System32\OpenCL.dll'  # Путь к OpenCL на Windows
    # Если у вас другая операционная система, путь будет отличаться

# Функция для запуска hashcat с использованием только CPU или указанной платформы OpenCL
def run_hashcat(hc22000_file, mask):
    # Установим переменную среды для OpenCL
    set_opencl_environment()
    # Указываем путь к hashcat
    hashcat_dir = r"B:\maraduer\hashcat-6.2.6"  # Путь к папке, где находится hashcat

    # Добавляем путь к hashcat в системную переменную PATH
    os.environ["PATH"] += os.pathsep + hashcat_dir
    # Формируем команду для запуска hashcat
    command = [
        "hashcat",
        "-D", "1",  # Принудительно используем только CPU (если GPU не настроено)
        "-m", "22000",  # Режим WPA2
        hc22000_file,  # Путь к файлу .hc22000
        mask  # Маска пароля
    ]
    try:
        # Запуск hashcat
        result = subprocess.run(command, capture_output=True, text=True)
        print(result.stdout)  # Печать вывода
        print(result.stderr)  # Печать ошибок (если есть)
    except Exception as e:
        print(f"[ERROR] Ошибка при запуске hashcat: {e}")
# Генерация паролей и запуск подбора
def generate_passwords_and_crack(hc22000_file):
    """
    Генерация паролей с помощью mask attack и подбора пароля.

    :param hc22000_file: Путь к файлу .hc22000
    """
    # Пример маски: 6 строчных букв и цифры
    mask = "?l?l?l?l?l?l?d?d"  # Маска для 6 символов (буквы и цифры)

    # Запуск функции подбора пароля
    run_hashcat(hc22000_file, mask)
# Пример использования
if __name__ == "__main__":
    hc22000_file = input("Введите путь к файлу .hc22000: ").strip()  # Путь к .hc22000 файлу
    generate_passwords_and_crack(hc22000_file)]]> <![CDATA[Prepend words to dict. Why so many time?]]> https://hashcat.net/forum/thread-12483.html Wed, 22 Jan 2025 09:12:48 +0000 hvprvtr]]> https://hashcat.net/forum/thread-12483.html Dict without this word (-a0) processed for 2 mins.
But if i run next modes, time rise to 7 days. Why so long?

(abc.txt contains word "abc" only)

Code:
hashcat.exe -a7 -m22000 lists\wifi.hc22000 abc dict.txt
hashcat.exe -a1 -m22000 lists\wifi.hc22000 abc.txt dict.txt
]]> Dict without this word (-a0) processed for 2 mins.
But if i run next modes, time rise to 7 days. Why so long?

(abc.txt contains word "abc" only)

Code:
hashcat.exe -a7 -m22000 lists\wifi.hc22000 abc dict.txt
hashcat.exe -a1 -m22000 lists\wifi.hc22000 abc.txt dict.txt
]]> <![CDATA[Prepend/Append rules phrase reverse]]> https://hashcat.net/forum/thread-12482.html Wed, 22 Jan 2025 09:11:52 +0000 hvprvtr]]> https://hashcat.net/forum/thread-12482.html
Created next rule list:
Code:
^a^b^c
^A^b^c
$a$b$c
$A$b$c

But in the work status i see this:
Quote:Candidates.#1....: cbApassword

Why cbA? Why it reversed? I dont need this. Only right two phrases.

Running hashcat:
Quote:hashcat.exe -r rules.txt -a0 -m22000 lists\wifi.hc22000 dict.txt
]]>
Created next rule list:
Code:
^a^b^c
^A^b^c
$a$b$c
$A$b$c

But in the work status i see this:
Quote:Candidates.#1....: cbApassword

Why cbA? Why it reversed? I dont need this. Only right two phrases.

Running hashcat:
Quote:hashcat.exe -r rules.txt -a0 -m22000 lists\wifi.hc22000 dict.txt
]]> <![CDATA[How to make masks out of a wordlist?]]> https://hashcat.net/forum/thread-12481.html Tue, 21 Jan 2025 18:57:31 +0000 Atlantis]]> https://hashcat.net/forum/thread-12481.html Say, I found a password 111qqq and it gives me the mask ?d?d?d?l?l?l]]> Say, I found a password 111qqq and it gives me the mask ?d?d?d?l?l?l]]> <![CDATA[SHA1 known pass but HC does not find]]> https://hashcat.net/forum/thread-12480.html Mon, 20 Jan 2025 20:10:52 +0000 TheBogeyman]]> https://hashcat.net/forum/thread-12480.html https://hashes.com/en/generate/hash I have created 3 hashes, 4 characters in lenght:

hash; 4c2e81405006edc6bf1727aada0387f5e49c8012       pass:£íݾ
hash; 65397f57ef46b46a9b41a2941eb34355d6a12261        pass:ù©»Ø
hash; 0b6fab05b46b7f887b089d768ce9bef587e4ff61        pass:ÆÁ¥¸

Is it possible that Hashcat does not known how to use those characters or am I missing something?]]> https://hashes.com/en/generate/hash I have created 3 hashes, 4 characters in lenght:

hash; 4c2e81405006edc6bf1727aada0387f5e49c8012       pass:£íݾ
hash; 65397f57ef46b46a9b41a2941eb34355d6a12261        pass:ù©»Ø
hash; 0b6fab05b46b7f887b089d768ce9bef587e4ff61        pass:ÆÁ¥¸

Is it possible that Hashcat does not known how to use those characters or am I missing something?]]> <![CDATA[the problem with restoring the wifi password]]> https://hashcat.net/forum/thread-12479.html Mon, 20 Jan 2025 19:21:36 +0000 bretget]]> https://hashcat.net/forum/thread-12479.html [Image: S3OJJBX]

.png   {B0876279-E56B-48C4-B53F-B0C9A78F2EEE}.png (Size: 128.38 KB / Downloads: 7) ]]> [Image: S3OJJBX]

.png   {B0876279-E56B-48C4-B53F-B0C9A78F2EEE}.png (Size: 128.38 KB / Downloads: 7) ]]> <![CDATA[hashcat speed when using a text file of NTLM hahes]]> https://hashcat.net/forum/thread-12476.html Sat, 18 Jan 2025 00:05:14 +0000 remoteview]]> https://hashcat.net/forum/thread-12476.html
We built a crackstation. When passing a single NTLM hash to hashcat, I average around 1200 GH/s.  However, when I change the hash to a text file containing two NTLM hashes, the speed drops to around 500 GH/s.  When I change the hash to a text file containing 25,000 NTLM hashes, the speed again drops to 500 GH/s.  This doesn't seem right and I wanted to inquire if anyone has tips or suggestions. 

Thanks!]]>
We built a crackstation. When passing a single NTLM hash to hashcat, I average around 1200 GH/s.  However, when I change the hash to a text file containing two NTLM hashes, the speed drops to around 500 GH/s.  When I change the hash to a text file containing 25,000 NTLM hashes, the speed again drops to 500 GH/s.  This doesn't seem right and I wanted to inquire if anyone has tips or suggestions. 

Thanks!]]>