This article provides syntax and options for Azure command-line interface (CLI) commands you'd commonly use to create and manage Azure resources in the Azure Resource Manager deployment model. You access these commands by running the CLI in Resource Manager (arm) mode. This is not a complete reference, and your CLI version may show slightly different commands or parameters. For a general overview of Azure resources and resource groups, see Azure Resource Manager Overview.
Note
This article shows Resource Manager mode commands in the Azure CLI, sometimes called Azure CLI 1.0. To work in the Resource Manager model, you can also try the Azure CLI 2.0, our next generation multi-platform CLI. Find out more about the old and new Azure CLIs.
To get started, first install the Azure CLI and connect to your Azure subscription.
For current command syntax and options at the command line in Resource Manager mode, type azure help or, to display help for a specific command, azure help [command]. Also find CLI examples in the documentation for creating and managing specific Azure services.
Optional parameters are shown in square brackets (for example, [parameter]). All other parameters are required.
In addition to command-specific optional parameters documented here, there are three optional parameters that can be used to display detailed output such as request options and status codes. The -v parameter provides verbose output, and the -vv parameter provides even more detailed verbose output. The --json option outputs the result in raw json format.
Setting the Resource Manager mode
Use the following command to enable Azure CLI Resource Manager mode commands.
azure config mode arm
Note
The CLI's Azure Resource Manager mode and Azure Service Management mode are mutually exclusive. That is, resources created in one mode cannot be managed from the other mode.
azure account: Manage your account information
Your Azure subscription information is used by the tool to connect to your account.
List the imported subscriptions
account list [options]
Show details about a subscription
account show [options] [subscriptionNameOrId]
Set the current subscription
account set [options] <subscriptionNameOrId>
Remove a subscription or environment, or clear all of the stored account and environment info
account clear [options]
Commands to manage your account environment
account env list [options]
account env show [options] [environment]
account env add [options] [environment]
account env set [options] [environment]
account env delete [options] [environment]
azure ad: Commands to display Active Directory objects
Commands to display active directory applications
ad app create [options]
ad app delete [options] <object-id>
Commands to display active directory groups
ad group list [options]
ad group show [options]
Commands to provide an active directory sub group or member info
ad group member list [options] [objectId]
Commands to display active directory service principals
ad sp list [options]
ad sp show [options]
ad sp create [options] <application-id>
ad sp delete [options] <object-id>
Commands to display active directory users
ad user list [options]
ad user show [options]
azure availset: commands to manage your availability sets
Creates an availability set within a resource group
availset create [options] <resource-group> <name> <location> [tags]
Lists the availability sets within a resource group
availset list [options] <resource-group>
Gets one availability set within a resource group
availset show [options] <resource-group> <name>
Deletes one availability set within a resource group
availset delete [options] <resource-group> <name>
azure config: commands to manage your local settings
List Azure CLI configuration settings
config list [options]
Delete a config setting
config delete [options] <name>
Update a config setting
config set <name> <value>
Sets the Azure CLI working mode to either arm or asm
config mode [options] <modename>
azure feature: commands to manage account features
List all features available for your subscription
feature list [options]
Shows a feature
feature show [options] <providerName> <featureName>
Registers a previewed feature of a resource provider
feature register [options] <providerName> <featureName>
azure group: Commands to manage your resource groups
Creates a resource group
group create [options] <name> <location>
Set tags to a resource group
group set [options] <name> <tags>
Deletes a resource group
group delete [options] <name>
Lists the resource groups for your subscription
group list [options]
Shows a resource group for your subscription
group show [options] <name>
Commands to manage resource group logs
group log show [options] [name]
Commands to manage your deployment in a resource group
group deployment create [options] [resource-group] [name]
group deployment list [options] <resource-group> [state]
group deployment show [options] <resource-group> [deployment-name]
group deployment stop [options] <resource-group> [deployment-name]
Commands to manage your local or gallery resource group template
group template list [options]
group template show [options] <name>
group template download [options] [name] [file]
group template validate [options] <resource-group>
azure hdinsight: Commands to manage your HDInsight clusters
Commands to create or add to a cluster configuration file
hdinsight config create [options] <configFilePath> <overwrite>
hdinsight config add-config-values [options] <configFilePath>
hdinsight config add-script-action [options] <configFilePath>
Example: Create a configuration file that contains a script action to run when creating a cluster.
hdinsight config create "C:\myFiles\configFile.config"
hdinsight config add-script-action --configFilePath "C:\myFiles\configFile.config" --nodeType HeadNode --uri <scriptActionURI> --name myScriptAction --parameters "-param value"
Command to create a cluster in a resource group
hdinsight cluster create [options] <clusterName>
Example: Create a Storm on Linux cluster
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Storm --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
Example: Create a cluster with a script action
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Hadoop --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 –configurationPath "C:\myFiles\configFile.config" myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
-vv more verbose with debug output
--json use json output
-g --resource-group <resource-group> The name of the resource group
-c, --clusterName <clusterName> HDInsight cluster name
-l, --location <location> Data center location for the cluster
-y, --osType <osType> HDInsight cluster operating system
'Windows' or 'Linux'
--version <version> HDInsight cluster version
--clusterType <clusterType> HDInsight cluster type.
Hadoop | HBase | Spark | Storm
--defaultStorageAccountName <storageAccountName> Storage account url to use for default HDInsight storage
--defaultStorageAccountKey <storageAccountKey> Key to the storage account to use for default HDInsight storage
--defaultStorageContainer <storageContainer> Container in the storage account to use for HDInsight default storage
--headNodeSize <headNodeSize> (Optional) Head node size for the cluster
--workerNodeCount <workerNodeCount> Number of worker nodes to use for the cluster
--workerNodeSize <workerNodeSize> (Optional) Worker node size for the cluster)
--zookeeperNodeSize <zookeeperNodeSize> (Optional) Zookeeper node size for the cluster
--userName <userName> Cluster username
--password <password> Cluster password
--sshUserName <sshUserName> SSH username (only for Linux clusters)
--sshPassword <sshPassword> SSH password (only for Linux clusters)
--sshPublicKey <sshPublicKey> SSH public key (only for Linux clusters)
--rdpUserName <rdpUserName> RDP username (only for Windows clusters)
--rdpPassword <rdpPassword> RDP password (only for Windows clusters)
--rdpAccessExpiry <rdpAccessExpiry> RDP access expiry.
For example 12/12/2015 (only for Windows clusters)
--virtualNetworkId <virtualNetworkId> (Optional) Virtual network ID for the cluster.
Value is a GUID for Windows cluster and ARM resource ID for Linux cluster)
--subnetName <subnetName> (Optional) Subnet for the cluster
--additionalStorageAccounts <additionalStorageAccounts> (Optional) Additional storage accounts.
Can be multiple.
In the format of 'accountName#accountKey'.
For example, --additionalStorageAccounts "acc1#key1;acc2#key2"
--hiveMetastoreServerName <hiveMetastoreServerName> (Optional) SQL Server name for the external metastore for Hive
--hiveMetastoreDatabaseName <hiveMetastoreDatabaseName> (Optional) Database name for the external metastore for Hive
--hiveMetastoreUserName <hiveMetastoreUserName> (Optional) Database username for the external metastore for Hive
--hiveMetastorePassword <hiveMetastorePassword> (Optional) Database password for the external metastore for Hive
--oozieMetastoreServerName <oozieMetastoreServerName> (Optional) SQL Server name for the external metastore for Oozie
--oozieMetastoreDatabaseName <oozieMetastoreDatabaseName> (Optional) Database name for the external metastore for Oozie
--oozieMetastoreUserName <oozieMetastoreUserName> (Optional) Database username for the external metastore for Oozie
--oozieMetastorePassword <oozieMetastorePassword> (Optional) Database password for the external metastore for Oozie
--configurationPath <configurationPath> (Optional) HDInsight cluster configuration file path
-s, --subscription <id> The subscription id
--tags <tags> Tags to set to the cluster.
Can be multiple.
In the format of 'name=value'.
Name is required and value is optional.
For example, --tags tag1=value1;tag2
Command to delete a cluster
hdinsight cluster delete [options] <clusterName>
Command to show cluster details
hdinsight cluster show [options] <clusterName>
Command to list all clusters (in a specific resource group, if provided)
hdinsight cluster list [options]
Command to resize a cluster
hdinsight cluster resize [options] <clusterName> <targetInstanceCount>
Command to enable HTTP access for a cluster
hdinsight cluster enable-http-access [options] <clusterName> <userName> <password>
Command to disable HTTP access for a cluster
hdinsight cluster disable-http-access [options] <clusterName>
Command to enable RDP access for a cluster
hdinsight cluster enable-rdp-access [options] <clusterName> <rdpUserName> <rdpPassword> <rdpExpiryDate>
Command to disable HTTP access for a cluster
hdinsight cluster disable-rdp-access [options] <clusterName>
azure insights: Commands related to monitoring Insights (events, alert rules, autoscale settings, metrics)
Retrieve operation logs for a subscription, a correlationId, a resource group, resource, or resource provider
insights logs list [options]
azure location: Commands to get the available locations for all resource types
List the available locations
location list [options]
azure network: Commands to manage network resources
Commands to manage virtual networks
network vnet create [options] <resource-group> <name> <location>
Creates a virtual network. In the following example we create a virtual network named newvnet for resource group myresourcegroup in the West US region.
azure network vnet create myresourcegroup newvnet "west us"
info: Executing command network vnet create
+ Looking up virtual network "newvnet"
+ Creating virtual network "newvnet"
Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-l, --location <location> the location
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network
For example -a 10.0.0.0/24,10.0.1.0/24.
Default value is 10.0.0.0/8
-d, --dns-servers <dns-servers> the comma separated list of DNS servers IP addresses
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network vnet set [options] <resource-group> <name>
Updates a virtual network configuration within a resource group.
azure network vnet set myresourcegroup newvnet
info: Executing command network vnet set
+ Looking up virtual network "newvnet"
+ Updating virtual network "newvnet"
+ Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet set command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network.
For example -a 10.0.0.0/24,10.0.1.0/24.
This list will be appended to the current list of address prefixes.
The address prefixes in this list should not overlap between them.
The address prefixes in this list should not overlap with existing address prefixes in the vnet.
-d, --dns-servers [dns-servers] the comma separated list of DNS servers IP addresses.
This list will be appended to the current list of DNS server IP addresses.
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2.
This list will be appended to the current list of tags
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network vnet list [options] <resource-group>
The command lists all virtual networks in a resource group.
C:\>azure network vnet list myresourcegroup
info: Executing command network vnet list
+ Listing virtual networks
data: ID
Name Location Address prefixes DNS servers
data: -------------------------------------------------------------------
------ -------- -------- ---------------- -----------
data: /subscriptions/###############################/resourceGroups/
wvnet newvnet westus 10.0.0.0/8
info: network vnet list command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network vnet show [options] <resource-group> <name>
The command shows the virtual network properties in a resource group.
azure network vnet show -g myresourcegroup -n newvnet
info: Executing command network vnet show
+ Looking up virtual network "newvnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet show command OK
network vnet delete [options] <resource-group> <name>
The command removes a virtual network.
azure network vnet delete myresourcegroup newvnetX
info: Executing command network vnet delete
+ Looking up virtual network "newvnetX"
Delete virtual network newvnetX? [y/n] y
+ Deleting virtual network "newvnetX"
info: network vnet delete command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Commands to manage virtual network subnets
network vnet subnet create [options] <resource-group> <vnet-name> <name>
Adds another subnet to an existing virtual network.
azure network vnet subnet create -g myresourcegroup --vnet-name newvnet -n subnet --address-prefix 10.0.1.0/24
info: Executing command network vnet subnet create
+ Looking up the subnet "subnet"
+ Creating subnet "subnet"
+ Looking up the subnet "subnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Name: subnet
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-a, --address-prefix <address-prefix> the address prefix
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name
-s, --subscription <subscription> the subscription identifier
network vnet subnet set [options] <resource-group> <vnet-name> <name>
Sets a specific virtual network subnet within a resource group.
C:\>azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet list [options] <resource-group> <vnet-name>
Lists all the virtual network subnets for a specific virtual network within a resource group.
azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet show [options] <resource-group> <vnet-name> <name>
Displays virtual network subnet properties
azure network vnet subnet show -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet show
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft
.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet show command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-s, --subscription <subscription> the subscription identifier
network vnet subnet delete [options] <resource-group> <vnet-name> <subnet-name>
Removes a subnet from an existing virtual network.
azure network vnet subnet delete -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet delete
+ Looking up the subnet "subnet1"
Delete subnet "subnet1"? [y/n] y
+ Deleting subnet "subnet1"
info: network vnet subnet delete command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the subnet name
-s, --subscription <subscription> the subscription identifier
-q, --quiet quiet mode, do not ask for delete confirmation
Commands to manage load balancers
network lb create [options] <resource-group> <name> <location>
Creates a load balancer set.
azure network lb create -g myresourcegroup -n mylb -l westus
info: Executing command network lb create
+ Looking up the load balancer "mylb"
+ Creating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-l, --location <location> the location
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network lb list [options] <resource-group>
Lists Load balancer resources within a resource group.
azure network lb list myresourcegroup
info: Executing command network lb list
+ Getting the load balancers
data: Name Location
data: ---- --------
data: mylb westus
info: network lb list command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network lb show [options] <resource-group> <name>
Displays load balancer information of a specific load balancer within a resource group
azure network lb show myresourcegroup mylb -v
info: Executing command network lb show
verbose: Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb show command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb delete [options] <resource-group> <name>
Delete load balancer resources.
azure network lb delete myresourcegroup mylb
info: Executing command network lb delete
+ Looking up the load balancer "mylb"
Delete load balancer "mylb"? [y/n] y
+ Deleting load balancer "mylb"
info: network lb delete command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Commands to manage probes of a load balancer
network lb probe create [options] <resource-group> <lb-name> <name>
Create the probe configuration for health status in the load balancer. Keep in mind to run this command, your load balancer requires a frontend-ip resource (Check out command "azure network frontend-ip" to assign an ip address to load balancer).
azure network lb probe create -g myresourcegroup --lb-name mylb -n mylbprobe --protocol tcp --port 80 -i 300
info: Executing command network lb probe create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-p, --protocol <protocol> the probe protocol
-o, --port <port> the probe port
-f, --path <path> the probe path
-i, --interval <interval> the probe interval in seconds
-c, --count <count> the number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe set [options] <resource-group> <lb-name> <name>
Updates an existing load balancer probe with new values for it.
azure network lb probe set -g myresourcegroup -l mylb -n mylbprobe -p mylbprobe1 -p TCP -o 443 -i 300
info: Executing command network lb probe set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe set command OK
Parameter options
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-e, --new-probe-name <new-probe-name> the new name of the probe
-p, --protocol <protocol> the new value for probe protocol
-o, --port <port> the new value for probe port
-f, --path <path> the new value for probe path
-i, --interval <interval> the new value for probe interval in seconds
-c, --count <count> the new value for number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe list [options] <resource-group> <lb-name>
List the probe properties for a load balancer set.
C:\>azure network lb probe list -g myresourcegroup -l mylb
info: Executing command network lb probe list
+ Looking up the load balancer "mylb"
data: Name Protocol Port Path Interval Count
data: --------- -------- ---- ---- -------- -----
data: mylbprobe Tcp 443 300 2
info: network lb probe list command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb probe delete [options] <resource-group> <lb-name> <name>
Removes the probe created for the load balancer.
azure network lb probe delete -g myresourcegroup -l mylb -n mylbprobe
info: Executing command network lb probe delete
+ Looking up the load balancer "mylb"
Delete a probe "mylbprobe?" [y/n] y
+ Updating load balancer "mylb"
info: network lb probe delete command OK
Commands to manage frontend ip configurations of a load balancer
network lb frontend-ip create [options] <resource-group> <lb-name> <name>
Creates a frontend IP configuration to an existing load balancer set.
azure network lb frontend-ip create -g myresourcegroup --lb-name mylb -n myfrontendip -o Dynamic -e subnet -m newvnet
info: Executing command network lb frontend-ip create
+ Looking up the load balancer "mylb"
+ Looking up the subnet "subnet"
+ Creating frontend IP configuration "myfrontendip"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/Myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address: 10.0.1.4
data: Subnet: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Public IP address:
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip create command OK
network lb frontend-ip set [options] <resource-group> <lb-name> <name>
Updates an existing configuration of a frontend IP.The command below adds a public IP called mypubip5 to an existing load balancer frontend IP named myfrontendip.
azure network lb frontend-ip set -g myresourcegroup --lb-name mylb -n myfrontendip -i mypubip5
info: Executing command network lb frontend-ip set
+ Looking up the load balancer "mylb"
+ Looking up the public ip "mypubip5"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address:
data: Subnet:
data: Public IP address: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mypubip5
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip set command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-a, --private-ip-address <private-ip-address> the private ip address
-o, --private-ip-allocation-method <private-ip-allocation-method> the private ip allocation method [Static, Dynamic]
-u, --public-ip-id <public-ip-id> the public ip identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-i, --public-ip-name <public-ip-name> the public ip name.
This public ip must exist in the same resource group as the lb.
Please use public-ip-id if that is not the case.
-b, --subnet-id <subnet-id> the subnet id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/VirtualNetworks/<vnet-name>/subnets/<subnet-name>
-e, --subnet-name <subnet-name> the subnet name
-m, --vnet-name <vnet-name> the virtual network name.
This virtual network must exist in the same resource group as the lb.
Please use subnet-id if that is not the case.
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip list [options] <resource-group> <lb-name>
Lists all the frontend IP resources configured for the load balancer.
azure network lb frontend-ip list -g myresourcegroup -l mylb
info: Executing command network lb frontend-ip list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Private IP allocation method Subnet
data: ----------- ------------------ ---------------------------- ------
data: myprivateip Succeeded Dynamic
info: network lb frontend-ip list command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip delete [options] <resource-group> <lb-name> <name>
Deletes the frontend IP object associated to load balancer
network lb frontend-ip delete -g myresourcegroup -l mylb -n myfrontendip
info: Executing command network lb frontend-ip delete
+ Looking up the load balancer "mylb"
Delete frontend ip configuration "myfrontendip"? [y/n] y
+ Updating load balancer "mylb"
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Commands to manage backend address pools of a load balancer
network lb address-pool create [options] <resource-group> <lb-name> <name>
Create a backend address pool for a load balancer.
azure network lb address-pool create -g myresourcegroup --lb-name mylb -n myaddresspool
info: Executing command network lb address-pool create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourgroup/providers/Microso.Network/loadBalancers/mylb/backendAddressPools/myaddresspool
data: Name: myaddresspool
data: Type: Microsoft.Network/loadBalancers/backendAddressPools
data: Provisioning state: Succeeded
data: Backend IP configurations:
data: Load balancing rules:
data:
info: network lb address-pool create command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-s, --subscription <subscription> the subscription identifier
network lb address-pool list [options] <resource-group> <lb-name>
List backend IP address pool range for a specific resource group
azure network lb address-pool list -g myresourcegroup -l mylb
info: Executing command network lb address-pool list
+ Looking up the load balancer "mylb"
data: Name Provisioning state
data: ------------- ------------------
data: mybackendpool Succeeded
info: network lb address-pool list command OK
Parameter options:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
Removes the backend IP pool range resource from load balancer. Parameter options: Commands to manage load balancer rules Create load balancer rules. You can create a load balancer rule configuring the frontend endpoint for the load balancer and the backend address pool range to receive the incoming network traffic. Settings also include the ports for frontend IP endpoint and ports for the backend address pool range. The following example shows how to create a load balancer rule, the frontend endpoint listening to port 80 TCP and load balancing network traffic sending to port 8080 for the backend address pool range. Updates an existing load balancer rule set in a specific resource group. In the following example, we changed the rule name from mylbrule to mynewlbrule. Parameter options: Lists all load balancer rules configured for a load balancer in a specific resource group. Parameter options: Deletes a load balancer rule. Parameter options: Commands to manage load balancer inbound NAT rules Creates an inbound NAT rule for load balancer. In the following example we created a NAT rule from frontend IP (which was previously defined using the "azure network frontend-ip" command) with an inbound listening port and outbound port that the load balancer uses to send the network traffic. Parameter options: Updates an existing inbound nat rule. In the following example, we changed the inbound listening port from 80 to 81. Parameter options: Lists all inbound nat rules for load balancer. Parameter options: Deletes NAT rule for the load balancer in a specific resource group. Parameter options: Commands to manage public ip addresses Creates a public ip resource. You will create the public ip resource and associate to a domain name. Parameter options: Updates the properties of an existing public ip resource. In the following example we changed the public IP address from Dynamic to Static. Parameter options:
Parameter options:
Displays public ip properties for a public ip resource within a resource group. Parameter options: Deletes public ip resource. Parameter options: Commands to manage network interfaces Creates a resource called network interface (NIC) which can be used for load balancers or associate to a Virtual Machine. Parameter options: Commands to manage network security groups Commands to manage network security group rules Commands to manage traffic manager profile Commands to manage traffic manager endpoints Commands to manage virtual network gateways List currently registered providers in Resource Manager Show details about the requested provider namespace Register provider with the subscription Unregister provider with the subscription Creates a resource in a resource group Updates a resource in a resource group without any templates or parameters Lists the resources Gets one resource within a resource group or subscription Deletes a resource in a resource group Get all available role definitions Get an available role definition Commands to manage your role assignment Commands to manage your Storage accounts Commands to manage your Storage account keys Commands to show your Storage connection string Commands to manage your Storage containers Commands to manage shared access signatures of your Storage container Commands to manage stored access policies of your Storage container Commands to manage your Storage blobs Commands to manage your blob copy operations Commands to manage shared access signature of your Storage blob Commands to manage your Storage file shares Commands to manage your Storage files Commands to manage your Storage file directory Commands to manage your Storage queues Commands to manage shared access signatures of your Storage queue Commands to manage stored access policies of your Storage queue Commands to manage your Storage logging properties Commands to manage your Storage metrics properties Commands to manage your Storage tables Commands to manage shared access signatures of your Storage table Commands to manage stored access policies of your Storage table Add a tag Remove an entire tag or a tag value Lists the tag information Get a tag Create a VM Create a VM with default resources Starting with CLI version 0.10, you can provide a short alias such as "UbuntuLTS" or "Win2012R2Datacenter" as the List the virtual machines within an account Get one virtual machine within a resource group Delete one virtual machine within a resource group Shutdown one virtual machine within a resource group Restart one virtual machine within a resource group Start one virtual machine within a resource group Shutdown one virtual machine within a resource group and releases the compute resources List available virtual machine sizes Capture the VM as OS Image or VM Image Set the state of the VM to Generalized Get instance view of the VM Enable you to reset Remote Desktop Access or SSH settings on a Virtual Machine and to reset the password for the account that has administrator or sudo authority Update VM with new data Commands to manage your Virtual Machine data disks Commands to manage VM resource extensions Commands to manage your Docker Virtual Machine Commands to manage VM images
network lb address-pool delete [options] azure network lb address-pool delete -g myresourcegroup -l mylb -n mybackendpool
info: Executing command network lb address-pool delete
+ Looking up the load balancer "mylb"
Delete backend address pool "mybackendpool"? [y/n] y
+ Updating load balancer "mylb"
info: network lb address-pool delete command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
network lb rule create [options] <resource-group> <lb-name> <name>
azure network lb rule create -g myresourcegroup -l mylb -n mylbrule -p tcp -f 80 -b 8080 -i 10
info: Executing command network lb rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mylbrule
data: Name: mylbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule create command OK
network lb rule set [options] <resource-group> <lb-name> <name>
azure network lb rule set -g myresourcegroup -l mylb -n mylbrule -r mynewlbrule -p tcp -f 80 -b 8080 -i 10 -t myfrontendip -o mybackendpool
info: Executing command network lb rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mynewlbrule
data: Name: mynewlbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule set command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-r, --new-rule-name <new-rule-name> new rule name
-p, --protocol <protocol> the rule protocol
-f, --frontend-port <frontend-port> the frontend port
-b, --backend-port <backend-port> the backend port
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip
-i, --idle-timeout <idle-timeout> the idle timeout in minutes
-a, --probe-name [probe-name] the name of the probe defined in the same load balancer
-t, --frontend-ip-name <frontend-ip-name> the name of the frontend ip configuration in the same load balancer
-o, --backend-address-pool <backend-address-pool> name of the backend address pool defined in the same load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule list [options] <resource-group> <lb-name>
azure network lb rule list -g myresourcegroup -l mylb
info: Executing command network lb rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend address pool Probe data
data: mynewlbrule Succeeded Tcp 80 8080 false 10 /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
info: network lb rule list command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule delete [options] <resource-group> <lb-name> <name>
azure network lb rule delete -g myresourcegroup -l mylb -n mynewlbrule
info: Executing command network lb rule delete
+ Looking up the load balancer "mylb"
Delete load balancing rule mynewlbrule? [y/n] y
+ Updating load balancer "mylb"
info: network lb rule delete command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule create [options] <resource-group> <lb-name> <name>
azure network lb inbound-nat-rule create -g myresourcegroup -l mylb -n myinboundnat -p tcp -f 80 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 80
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule create command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id <vm-id> the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.This VM must exist in the same resource group as the lb.
Please use vm-id if that is not the case.
this parameter will be ignored if --vm-id is specified
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule set [options] <resource-group> <lb-name> <name>
azure network lb inbound-nat-rule set -g group-1 -l mylb -n myinboundnat -p tcp -f 81 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 81
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule set command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id [vm-id] the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.
This virtual machine must exist in the same resource group as the lb.
Please use vm-id if that is not the case
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule list [options] <resource-group> <lb-name>
azure network lb inbound-nat-rule list -g myresourcegroup -l mylb
info: Executing command network lb inbound-nat-rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend IP configuration
data: ------------ ------------------ -------- ------------- ------------ ------------------ ----------------------- ---
---------------------
data: myinboundnat Succeeded Tcp 81 8080 false 4
info: network lb inbound-nat-rule list command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule delete [options] <resource-group> <lb-name> <name>
azure network lb inbound-nat-rule delete -g myresourcegroup -l mylb -n myinboundnat
info: Executing command network lb inbound-nat-rule delete
+ Looking up the load balancer "mylb"
Delete inbound NAT rule "myinboundnat?" [y/n] y
+ Updating load balancer "mylb"
info: network lb inbound-nat-rule delete command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
network public-ip create [options] <resource-group> <name> <location>
azure network public-ip create -g myresourcegroup -n mytestpublicip1 -l eastus -d azureclitest -a "Dynamic"
info: Executing command network public-ip create
+ Looking up the public ip "mytestpublicip1"
+ Creating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Dynamic
data: Idle timeout: 4
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip create command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-l, --location <location> the location
-d, --domain-name-label <domain-name-label> the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn <reverse-fqdn> the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network public-ip set [options] <resource-group> <name>
azure network public-ip set -g group-1 -n mytestpublicip1 -d azureclitest -a "Static"
info: Executing command network public-ip set
+ Looking up the public ip "mytestpublicip1"
+ Updating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip set command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-d, --domain-name-label [domain-name-label] the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn [reverse-fqdn] the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network public-ip list [options] azure network public-ip list -g myresourcegroup
info: Executing command network public-ip list
+ Getting the public ip addresses
data: Name Location Allocation IP Address Idle timeout DNS Name
data: --------------- -------- ---------- ------------ ------------ -------------------------------------------
data: mypubip5 westus Dynamic 4 "domain name".westus.cloudapp.azure.com
data: myPublicIP eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip1 eastus Static (Static IP address) 4 azureclitest.eastus.cloudapp.azure.com
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network public-ip show [options] azure network public-ip show -g myresourcegroup -n mytestpublicip
info: Executing command network public-ip show
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip
data: Name: mytestpublicip
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip show command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-s, --subscription <subscription> the subscription identifier
network public-ip delete [options] <resource-group> <name>
azure network public-ip delete -g group-1 -n mypublicipname
info: Executing command network public-ip delete
+ Looking up the public ip "mypublicipname"
Delete public ip address "mypublicipname"? [y/n] y
+ Deleting public ip address "mypublicipname"
info: network public-ip delete command OK
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
network nic create [options] <resource-group> <name> <location>
azure network nic create -g myresourcegroup -l eastus -n testnic1 --subnet-name subnet-1 --subnet-vnet-name myvnet
info: Executing command network nic create
+ Looking up the network interface "testnic1"
+ Looking up the subnet "subnet-1"
+ Creating network interface "testnic1"
+ Looking up the network interface "testnic1"
data: Id: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/networkInterfaces/testnic1
data: Name: testnic1
data: Type: Microsoft.Network/networkInterfaces
data: Location: eastus
data: Provisioning state: Succeeded
data: IP configurations:
data: Name: NIC-config
data: Provisioning state: Succeeded
data: Private IP address: 10.0.0.5
data: Private IP Allocation Method: Dynamic
data: Subnet: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/virtualNetworks/myVNET/subnets/Subnet-1
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the network interface
-l, --location <location> the location
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name.
This network security group must exist in the same resource group as the nic.
Please use network-security-group-id if that is not the case.
-i, --public-ip-id <public-ip-id> the public IP identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-p, --public-ip-name <public-ip-name> the public IP name.
This public ip must exist in the same resource group as the nic.
Please use public-ip-id if that is not the case.
-a, --private-ip-address <private-ip-address> the private IP address
-u, --subnet-id <subnet-id> the subnet identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/virtualNetworks/<vnet-name>/subnets/<subnet-name>
--subnet-name <subnet-name> the subnet name
-m, --subnet-vnet-name <subnet-vnet-name> the vnet name under which subnet-name exists
-t, --tags <tags> the comma seperated list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
data:
info: network nic create command OK
network nic set [options] <resource-group> <name>
network nic list [options] <resource-group>
network nic show [options] <resource-group> <name>
network nic delete [options] <resource-group> <name>
network nsg create [options] <resource-group> <name> <location>
network nsg set [options] <resource-group> <name>
network nsg list [options] <resource-group>
network nsg show [options] <resource-group> <name>
network nsg delete [options] <resource-group> <name>
network nsg rule create [options] <resource-group> <nsg-name> <name>
network nsg rule set [options] <resource-group> <nsg-name> <name>
network nsg rule list [options] <resource-group> <nsg-name>
network nsg rule show [options] <resource-group> <nsg-name> <name>
network nsg rule delete [options] <resource-group> <nsg-name> <name>
network traffic-manager profile create [options] <resource-group> <name>
network traffic-manager profile set [options] <resource-group> <name>
network traffic-manager profile list [options] <resource-group>
network traffic-manager profile show [options] <resource-group> <name>
network traffic-manager profile delete [options] <resource-group> <name>
network traffic-manager profile is-dns-available [options] <resource-group> <relative-dns-name>
network traffic-manager profile endpoint create [options] <resource-group> <profile-name> <name> <endpoint-location>
network traffic-manager profile endpoint set [options] <resource-group> <profile-name> <name>
network traffic-manager profile endpoint delete [options] <resource-group> <profile-name> <name>
network gateway list [options] <resource-group>
azure provider: Commands to manage resource provider registrations
provider list [options]
provider show [options] <namespace>
provider register [options] <namespace>
provider unregister [options] <namespace>
azure resource: Commands to manage your resources
resource create [options] <resource-group> <name> <resource-type> <location> <api-version>
resource set [options] <resource-group> <name> <resource-type> <properties> <api-version>
resource list [options] [resource-group]
resource show [options] <resource-group> <name> <resource-type> <api-version>
resource delete [options] <resource-group> <name> <resource-type> <api-version>
azure role: Commands to manage your Azure roles
role list [options]
role show [options] [name]
role assignment create [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment list [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment delete [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
azure storage: Commands to manage your Storage objects
storage account list [options]
storage account show [options] <name>
storage account create [options] <name>
storage account set [options] <name>
storage account delete [options] <name>
storage account keys list [options] <name>
storage account keys renew [options] <name>
storage account connectionstring show [options] <name>
storage container list [options] [prefix]
storage container show [options] [container]
storage container create [options] [container]
storage container delete [options] [container]
storage container set [options] [container]
storage container sas create [options] [container] [permissions] [expiry]
storage container policy create [options] [container] [name]
storage container policy show [options] [container] [name]
storage container policy list [options] [container]
storage container policy set [options] [container] [name]
storage container policy delete [options] [container] [name]
storage blob list [options] [container] [prefix]
storage blob show [options] [container] [blob]
storage blob delete [options] [container] [blob]
storage blob upload [options] [file] [container] [blob]
storage blob download [options] [container] [blob] [destination]
storage blob copy start [options] [sourceUri] [destContainer]
storage blob copy show [options] [container] [blob]
storage blob copy stop [options] [container] [blob] [copyid]
storage blob sas create [options] [container] [blob] [permissions] [expiry]
storage share create [options] [share]
storage share show [options] [share]
storage share delete [options] [share]
storage share list [options] [prefix]
storage file list [options] [share] [path]
storage file delete [options] [share] [path]
storage file upload [options] [source] [share] [path]
storage file download [options] [share] [path] [destination]
storage directory create [options] [share] [path]
storage directory delete [options] [share] [path]
storage queue create [options] [queue]
storage queue list [options] [prefix]
storage queue show [options] [queue]
storage queue delete [options] [queue]
storage queue sas create [options] [queue] [permissions] [expiry]
storage queue policy create [options] [queue] [name]
storage queue policy show [options] [queue] [name]
storage queue policy list [options] [queue]
storage queue policy set [options] [queue] [name]
storage queue policy delete [options] [queue] [name]
storage logging show [options]
storage logging set [options]
storage metrics show [options]
storage metrics set [options]
storage table create [options] [table]
storage table list [options] [prefix]
storage table show [options] [table]
storage table delete [options] [table]
storage table sas create [options] [table] [permissions] [expiry]
storage table policy create [options] [table] [name]
storage table policy show [options] [table] [name]
storage table policy list [options] [table]
storage table policy set [options] [table] [name]
storage table policy delete [options] [table] [name]
azure tag: Commands to manage your resource manager tag
tag create [options] <name> <value>
tag delete [options] <name> <value>
tag list [options]
tag show [options] [name]
azure vm: Commands to manage your Azure Virtual Machines
vm create [options] <resource-group> <name> <location> <os-type>
vm quick-create [options] <resource-group> <name> <location> <os-type> <image-urn> <admin-username> <admin-password
Tip
image-urn for some popular Marketplace images. Run azure help vm quick-create for options. Additionally, starting with version 0.10, azure vm quick-create uses premium storage by default if it's available in the selected region.vm list [options]
vm show [options] <resource-group> <name>
vm delete [options] <resource-group> <name>
vm stop [options] <resource-group> <name>
vm restart [options] <resource-group> <name>
vm start [options] <resource-group> <name>
vm deallocate [options] <resource-group> <name>
vm sizes [options]
vm capture [options] <resource-group> <name> <vhd-name-prefix>
vm generalize [options] <resource-group> <name>
vm get-instance-view [options] <resource-group> <name>
vm reset-access [options] <resource-group> <name>
vm set [options] <resource-group> <name>
vm disk attach-new [options] <resource-group> <vm-name> <size-in-gb> [vhd-name]
vm disk detach [options] <resource-group> <vm-name> <lun>
vm disk attach [options] <resource-group> <vm-name> [vhd-url]
vm extension set [options] <resource-group> <vm-name> <name> <publisher-name> <version>
vm extension get [options] <resource-group> <vm-name>
vm docker create [options] <resource-group> <name> <location> <os-type>
vm image list-publishers [options] <location>
vm image list-offers [options] <location> <publisher>
vm image list-skus [options] <location> <publisher> <offer>
vm image list [options] <location> <publisher> [offer] [sku]