Table of Contents
The Performance Schema is a tool to help a DBA do performance tuning by taking real measurements instead of “wild guesses.” This section demonstrates some ways to use the Performance Schema for this purpose. The discussion here relies on the use of event filtering, which is described in Section 3.3.2, “Performance Schema Event Filtering”.
The following example provides one methodology that you can use to analyze a repeatable problem, such as investigating a performance bottleneck. To begin, you should have a repeatable use case where performance is deemed “too slow” and needs optimization, and you should enable all instrumentation (no pre-filtering at all).
Run the use case.
Using the Performance Schema tables, analyze the root cause of the performance problem. This analysis will rely heavily on post-filtering.
For problem areas that are ruled out, disable the corresponding instruments. For example, if analysis shows that the issue is not related to file I/O in a particular storage engine, disable the file I/O instruments for that engine. Then truncate the history and summary tables to remove previously collected events.
Repeat the process at step 1.
At each iteration, the Performance Schema output, particularly
the events_waits_history_long
table, will contain less and less “noise” caused
by nonsignificant instruments, and given that this table has a
fixed size, will contain more and more data relevant to the
analysis of the problem at hand.
At each iteration, investigation should lead closer and closer to the root cause of the problem, as the “signal/noise” ratio will improve, making analysis easier.
Once a root cause of performance bottleneck is identified, take the appropriate corrective action, such as:
Tune the server parameters (cache sizes, memory, and so forth).
Tune a query by writing it differently,
Tune the database schema (tables, indexes, and so forth).
Tune the code (this applies to storage engine or server developers only).
Start again at step 1, to see the effects of the changes on performance.
The mutex_instances.LOCKED_BY_THREAD_ID and
rwlock_instances.WRITE_LOCKED_BY_THREAD_ID
columns are extremely important for investigating performance
bottlenecks or deadlocks. This is made possible by Performance
Schema instrumentation as follows:
Suppose that thread 1 is stuck waiting for a mutex.
You can determine what the thread is waiting for:
SELECT * FROM events_waits_current WHERE THREAD_ID = thread_1;
Say the query result identifies that the thread is waiting for
mutex A, found in
events_waits_current.OBJECT_INSTANCE_BEGIN.
You can determine which thread is holding mutex A:
SELECT * FROM mutex_instances WHERE OBJECT_INSTANCE_BEGIN = mutex_A;
Say the query result identifies that it is thread 2 holding
mutex A, as found in
mutex_instances.LOCKED_BY_THREAD_ID.
You can see what thread 2 is doing:
SELECT * FROM events_waits_current WHERE THREAD_ID = thread_2;
The following example demonstrates how to use Performance Schema
statement events and stage events to retrieve data comparable to
profiling information provided by SHOW
PROFILES and SHOW
PROFILE statements.
As of MySQL 5.7.8, the setup_actors
table can be used to limit the collection of historical events
by host, user, or account to reduce runtime overhead and the
amount of data collected in history tables. The first step of
the example shows how to limit collection of historical events
to a specific user.
Performance Schema displays event timer information in
picoseconds (trillionths of a second) to normalize timing data
to a standard unit. In the following example,
TIMER_WAIT values are divided by
1000000000000 to show data in units of seconds. Values are also
truncated to 6 decimal places to display data in the same format
as SHOW PROFILES and
SHOW PROFILE statements.
Limit the collection of historical events to the user that
will run the query. By default,
setup_actors is configured to
allow monitoring and historical event collection for all
foreground threads:
mysql> SELECT * FROM setup_actors; +------+------+------+---------+---------+ | HOST | USER | ROLE | ENABLED | HISTORY | +------+------+------+---------+---------+ | % | % | % | YES | YES | +------+------+------+---------+---------+
Update the default row in the
setup_actors table to disable
historical event collection and monitoring for all
foreground threads, and insert a new row that enables
monitoring and historical event collection for the user that
will run the query:
mysql> UPDATE performance_schema.setup_actors SET ENABLED = 'NO', HISTORY = 'NO'
-> WHERE HOST = '%' AND USER = '%';
mysql> INSERT INTO performance_schema.setup_actors (HOST,USER,ROLE,ENABLED,HISTORY)
-> VALUES('localhost','test_user','%','YES','YES');
Data in the setup_actors table
should now appear similar to the following:
mysql> SELECT * FROM performance_schema.setup_actors; +-----------+-----------+------+---------+---------+ | HOST | USER | ROLE | ENABLED | HISTORY | +-----------+-----------+------+---------+---------+ | % | % | % | NO | NO | | localhost | test_user | % | YES | YES | +-----------+-----------+------+---------+---------+
Ensure that statement and stage instrumentation is enabled
by updating the
setup_instruments table. Some
instruments may already be enabled by default.
mysql> UPDATE performance_schema.setup_instruments SET ENABLED = 'YES', TIMED = 'YES'
-> WHERE NAME LIKE '%statement/%';
mysql> UPDATE performance_schema.setup_instruments SET ENABLED = 'YES', TIMED = 'YES'
-> WHERE NAME LIKE '%stage/%';
Ensure that events_statements_* and
events_stages_* consumers are enabled.
Some consumers may already be enabled by default.
mysql> UPDATE performance_schema.setup_consumers SET ENABLED = 'YES'
-> WHERE NAME LIKE '%events_statements_%';
mysql> UPDATE performance_schema.setup_consumers SET ENABLED = 'YES'
-> WHERE NAME LIKE '%events_stages_%';Under the user account you are monitoring, run the statement that you want to profile. For example:
mysql> SELECT * FROM employees.employees WHERE emp_no = 10001; +--------+------------+------------+-----------+--------+------------+ | emp_no | birth_date | first_name | last_name | gender | hire_date | +--------+------------+------------+-----------+--------+------------+ | 10001 | 1953-09-02 | Georgi | Facello | M | 1986-06-26 | +--------+------------+------------+-----------+--------+------------+
Identify the EVENT_ID of the statement by
querying the
events_statements_history_long
table. This step is similar to running
SHOW PROFILES to identify the
Query_ID. The following query produces
output similar to SHOW
PROFILES:
mysql> SELECT EVENT_ID, TRUNCATE(TIMER_WAIT/1000000000000,6) as Duration, SQL_TEXT
-> FROM performance_schema.events_statements_history_long WHERE SQL_TEXT like '%10001%';
+----------+----------+--------------------------------------------------------+
| event_id | duration | sql_text |
+----------+----------+--------------------------------------------------------+
| 31 | 0.028310 | SELECT * FROM employees.employees WHERE emp_no = 10001 |
+----------+----------+--------------------------------------------------------+
Query the
events_stages_history_long
table to retrieve the statement's stage events. Stages are
linked to statements using event nesting. Each stage event
record has a NESTING_EVENT_ID column that
contains the EVENT_ID of the parent
statement.
mysql> SELECT event_name AS Stage, TRUNCATE(TIMER_WAIT/1000000000000,6) AS Duration
-> FROM performance_schema.events_stages_history_long WHERE NESTING_EVENT_ID=31;
+--------------------------------+----------+
| Stage | Duration |
+--------------------------------+----------+
| stage/sql/starting | 0.000080 |
| stage/sql/checking permissions | 0.000005 |
| stage/sql/Opening tables | 0.027759 |
| stage/sql/init | 0.000052 |
| stage/sql/System lock | 0.000009 |
| stage/sql/optimizing | 0.000006 |
| stage/sql/statistics | 0.000082 |
| stage/sql/preparing | 0.000008 |
| stage/sql/executing | 0.000000 |
| stage/sql/Sending data | 0.000017 |
| stage/sql/end | 0.000001 |
| stage/sql/query end | 0.000004 |
| stage/sql/closing tables | 0.000006 |
| stage/sql/freeing items | 0.000272 |
| stage/sql/cleaning up | 0.000001 |
+--------------------------------+----------+
15 rows in set (0.00 sec)