Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

textscan

Read formatted data from text file or string

collapse all in page

Syntax

  • C = textscan(fileID,formatSpec)
    example
  • C = textscan(fileID,formatSpec,N)
    example
  • C = textscan(chr,formatSpec)
    example
  • C = textscan(chr,formatSpec,N)
  • C = textscan(___,Name,Value)
    example
  • [C,position] = textscan(___)
    example

Description

example

C = textscan(fileID,formatSpec) reads data from an open text file into a cell array, C. The text file is indicated by the file identifier, fileID. Use fopen to open the file and obtain the fileID value. When you finish reading from a file, close the file by calling fclose(fileID).

textscan attempts to match the data in the file to the conversion specifier in formatSpec. The textscan function reapplies formatSpec throughout the entire file and stops when it cannot match formatSpec to the data.

example

C = textscan(fileID,formatSpec,N) reads file data using the formatSpec N times, where N is a positive integer. To read additional data from the file after N cycles, call textscan again using the original fileID. If you resume a text scan of a file by calling textscan with the same file identifier (fileID), then textscan automatically resumes reading at the point where it terminated the last read.

example

C = textscan(chr,formatSpec) reads the text from character vector chr into cell array C. When reading text from a character vector, repeated calls to textscan restart the scan from the beginning each time. To restart a scan from the last position, request a position output.

textscan attempts to match the data in character vector chr to the format specified in formatSpec.

C = textscan(chr,formatSpec,N) uses the formatSpec N times, where N is a positive integer.

example

C = textscan(___,Name,Value) specifies options using one or more Name,Value pair arguments, in addition to any of the input arguments in the previous syntaxes.

example

[C,position] = textscan(___) returns the position in the file or the character vector at the end of the scan as the second output argument. For a file, this is the value that ftell(fileID) would return after calling textscan. For a character vector, position indicates how many characters textscan read.

Examples

collapse all

Open Script

Read a character vector containing floating-point numbers.

chr = '0.41 8.24 3.57 6.24 9.27';
C = textscan(chr,'%f');

The specifier '%f' in formatSpec tells textscan to match each field in chr to a double-precision floating-point number.

Display the contents of cell array C.

celldisp(C)

 
C{1} =
 
    0.4100
    8.2400
    3.5700
    6.2400
    9.2700

Read the same character vector, and truncate each value to one decimal digit.

C = textscan(chr,'%3.1f %*1d');

The specifier %3.1f indicates a field width of 3 digits and a precision of 1. The textscan function reads a total of 3 digits, including the decimal point and the 1 digit after the decimal point. The specifier, %*1d, tells textscan to skip the remaining digit.

Display the contents of cell array C.

celldisp(C)

 
C{1} =
 
    0.4000
    8.2000
    3.5000
    6.2000
    9.2000

Using a text editor, create a file scan1.dat that contains data in the following form:

09/12/2005 Level1 12.34 45 1.23e10 inf Nan Yes 5.1+3i
10/12/2005 Level2 23.54 60 9e19 -inf  0.001 No 2.2-.5i
11/12/2005 Level3 34.90 12 2e5   10  100   No 3.1+.1i

Open the file, and read each column with the appropriate conversion specifier.

fileID = fopen('scan1.dat');
C = textscan(fileID,'%s %s %f32 %d8 %u %f %f %s %f');
fclose(fileID);
celldisp(C)
C{1}{1} =
 
09/12/2005
 
 
C{1}{2} =
 
10/12/2005
 
 
C{1}{3} =
 
11/12/2005
 
 
C{2}{1} =
 
Level1
 
 
C{2}{2} =
 
Level2
 
 
C{2}{3} =
 
Level3
 
 
C{3} =
 
   12.3400
   23.5400
   34.9000

 
 
C{4} =
 
   45
   60
   12

 
 
C{5} =
 
  4294967295
  4294967295
      200000

 
 
C{6} =
 
   Inf
  -Inf
    10

 
 
C{7} =
 
       NaN
    0.0010
  100.0000

 
 
C{8}{1} =
 
Yes
 
 
C{8}{2} =
 
No
 
 
C{8}{3} =
 
No
 
 
C{9} =
 
   5.1000 + 3.0000i
   2.2000 - 0.5000i
   3.1000 + 0.1000i

textscan returns a 1-by-9 cell array C.

View the MATLAB® data type of each of the cells in C.

C
C = 

  Columns 1 through 5

    {3x1 cell}    {3x1 cell}    [3x1 single]    [3x1 int8]    [3x1 uint32]

  Columns 6 through 9

    [3x1 double]    [3x1 double]    {3x1 cell}    [3x1 double]

For example, C{1} and C{2} are cell arrays. C{5} is of data type uint32, so the first two elements of C{5} are the maximum values for a 32-bit unsigned integer, or intmax('uint32').

Remove the literal text 'Level' from each field in the second column of the data from the previous example.

Match the literal text in the formatSpec input.

fileID = fopen('scan1.dat');
C = textscan(fileID,'%s Level%d %f32 %d8 %u %f %f %s %f');
fclose(fileID);
C{2}
ans =

           1
           2
           3

View the MATLAB data type of the second cell in C.

class(C{2})
ans =

int32

The second cell of the 1-by-9 cell array, C, is now of data type int32.

Read the first column of the file in the previous example into a cell array, skipping the rest of the line.

fileID = fopen('scan1.dat');
dates = textscan(fileID,'%s %*[^\n]');
fclose(fileID);
dates{1}
ans = 

    '09/12/2005'
    '10/12/2005'
    '11/12/2005'

textscan returns a 1-by-1 cell array dates.

Using a text editor, create a comma-delimited file, data.csv, that contains

1,  2,  3,  4,   ,  6
7,  8,  9,   , 11, 12

Read the file, converting empty cells to -Inf.

fileID = fopen('data.csv');
C = textscan(fileID,'%f %f %f %f %u8 %f',...
'Delimiter',',','EmptyValue',-Inf);
fclose(fileID);
column4 = C{4}, column5 = C{5}
column4 =

     4
  -Inf


column5 =

    0
   11

textscan returns a 1-by-6 cell array, C. The textscan function converts the empty value in C{4} to -Inf, where C{4} is associated with a floating-point format. Because MATLAB represents unsigned integer -Inf as 0, textscan converts the empty value in C{5} to 0, and not -Inf.

Using a text editor, create a comma-delimited file, data2.csv, that contains the lines

abc, 2, NA, 3, 4
// Comment Here
def, na, 5, 6, 7

Designate the input that textscan should treat as comments or empty values.

fileID = fopen('data2.csv');
C = textscan(fileID,'%s %n %n %n %n','Delimiter',',',...
'TreatAsEmpty',{'NA','na'},'CommentStyle','//');
fclose(fileID);
celldisp(C)
C{1}{1} =
abc

C{1}{2} =
def

C{2} =
     2
   NaN

C{3} =
   NaN
     5

C{4} =
     3
     6

C{5} =
     4
     7

Using a text editor, create a file, data3.csv, that contains

1,2,3,,4
5,6,7,,8

To treat the repeated commas as a single delimiter, use the MultipleDelimsAsOne parameter, and set the value to 1 (true).

fileID = fopen('data3.csv');
C = textscan(fileID,'%f %f %f %f','Delimiter',',',...
'MultipleDelimsAsOne',1);
fclose(fileID);
celldisp(C)
C{1} =
     1
     5

C{2} =
     2
     6

C{3} =
     3
     7

C{4} =
     4
     8

Using a text editor, create a file, grades.txt, that contains:

Student_ID  | Test1  | Test2  | Test3
   1           91.5     89.2     77.3
   2           88.0     67.8     91.0
   3           76.3     78.1     92.5
   4           96.4     81.2     84.6

Read the column headers using the format '%s' four times.

fileID = fopen('grades.txt');

formatSpec = '%s';
N = 4;
C_text = textscan(fileID,formatSpec,N,'Delimiter','|');

Read the numeric data in the file.

C_data0 = textscan(fileID,'%d %f %f %f')

C_data0 = 
  [4x1 int32]    [4x1 double]    [4x1 double]    [4x1 double]

The default value for CollectOutput is 0 (false), so textscan returns each column of the numeric data in a separate array.

Set the file position indicator to the beginning of the file.

frewind(fileID);

Reread the file and set CollectOutput to 1 (true) to collect the consecutive columns of the same class into a single array. You can use the repmat function to indicate that the %f conversion specifier should appear three times. This technique is useful when a format repeats many times.

C_text = textscan(fileID,'%s',N,'Delimiter','|');

C_data1 = textscan(fileID,['%d',repmat('%f',[1,3])],'CollectOutput',1)

C_data1 = 
    [4x1 int32]    [4x3 double]

The test scores, which are all double, are collected into a single 4-by-3 array.

Close the file, grades.txt.

fclose(fileID);

Read the first and last columns of data from a text file. Skip a column of text and a column of integer data.

In a text editor, create a comma-delimited text file called names.txt that contains:

"Smith, J.","M",38,71.1
"Bates, G.","F",43,69.3
"Curie, M.","F",38,64.1
"Murray, G.","F",40,133.0
"Brown, K.","M",49,64.9

Read the first and last columns of data in the file. Use the conversion specifier, %q to read the text enclosed by double quotation marks ("). %*q skips the quoted text, %*d skips the integer field, and %f reads the floating-point number. Specify the comma delimiter using the 'Delimiter' name-value pair argument.

fileID = fopen('names.txt','r');
C = textscan(fileID,'%q %*q %*d %f','Delimiter',',');
fclose(fileID);
celldisp(C)
C{1}{1} =
 
Smith, J.
 
 
C{1}{2} =
 
Bates, G.
 
 
C{1}{3} =
 
Curie, M.
 
 
C{1}{4} =
 
Murray, G.
 
 
C{1}{5} =
 
Brown, K.
 
 
C{2} =
 
   71.1000
   69.3000
   64.1000
  133.0000
   64.9000

textscan returns a 1-by-2 cell array, C. Double quotation marks enclosing the text are removed.

Create a sample file named myfile.txt that contains comma-separated values. The first column of values contains dates in German and the second and third columns are numeric values.

fileID = fopen('myfile.txt','w','n','ISO-8859-15');
fprintf(fileID,'1 Januar 2014, 20.2, 100.5 \n');
fprintf(fileID,'1 Februar 2014, 21.6, 102.7 \n');
fprintf(fileID,'1 März 2014, 20.7, 99.8 \n');
fclose(fileID);

The sample file looks like this:

1 Januar 2014, 20.2, 100.5
1 Februar 2014, 21.6, 102.7
1 März 2014, 20.7, 99.8

Open the file. Specify the character encoding scheme associated with the file as the last input to fopen.

fileID = fopen('myfile.txt','r','n','ISO-8859-15');

Read the file. Specify the format of the dates in the file using the %{dd % MMMM yyyy}D specifier. Specify the locale of the dates using the DateLocale name-value pair argument.

C = textscan(fileID,'%{dd MMMM yyyy}D %f %f',...
    'DateLocale','de_DE','Delimiter',',');
fclose(fileID);

View the contents of the first cell in C.

C{1}
ans = 

   01 January 2014 
   01 February 2014
   01 March 2014

The dates display in the language MATLAB uses depending on your system locale.

Open Script

Use sprintf to convert nondefault escape sequences in your data.

Create text that includes a form feed character, \f. Then, to read the text using textscan, call sprintf to explicitly convert the form feed.

lyric = sprintf('Blackbird\fsinging\fin\fthe\fdead\fof\fnight');
C = textscan(lyric,'%s','delimiter',sprintf('\f'));
C{1}

ans =

  7×1 cell array

    'Blackbird'
    'singing'
    'in'
    'the'
    'dead'
    'of'
    'night'

textscan returns a 1-by-1 cell array, C.

Open Script

Resume scanning from a position other than the beginning.

If you resume a scan of the text, textscan reads from the beginning each time. To resume a scan from any other position, use the two-output argument syntax in your initial call to textscan.

For example, create a character vector called lyric. Read the first word of the character vector, and then resume the scan.

lyric = 'Blackbird singing in the dead of night';
[firstword,pos] = textscan(lyric,'%9c',1);
lastpart = textscan(lyric(pos+1:end),'%s');

Related Examples

Input Arguments

collapse all

File identifier of an open text file, specified as a number. Before reading a file with textscan, you must use fopen to open the file and obtain the fileID.

Data Types: double

Format of the data fields, specified as a character vector of one or more conversion specifiers. When textscan reads a file or a character vector, it attempts to match the data to the format specified in formatSpec. If textscan fails to match a data field, it stops reading and returns all fields read before the failure.

The number of conversion specifiers determines the number of cells in output array, C.

Numeric Fields

This table lists available conversion specifiers for numeric inputs.

Numeric Input TypeConversion SpecifierOutput Class
Integer, signed%dint32
%d8int8
%d16int16
%d32int32
%d64int64
Integer, unsigned%uuint32
%u8uint8
%u16uint16
%u32uint32
%u64uint64
Floating-point number%fdouble
%f32single
%f64double
%ndouble

Nonnumeric Fields

This table lists available conversion specifiers for inputs that include nonnumeric characters.

Nonnumeric Input TypeConversion SpecifierDetails
Character%cRead any single character, including a delimiter.
Text Array%sRead as a cell array of character vectors.
%q

Read as a cell array of character vectors. If the text begins with a double quotation mark ("), omit the leading quotation mark and its accompanying closing mark, which is the second instance of a lone double quotation mark. Replace escaped double quotation marks (for example, ""abc"") with lone double quotation marks ("abc"). %q ignores any double quotation marks that appear after the closing double quotation mark.

Example: '%q' reads '"Joe ""Lightning"" Smith, Jr."' as 'Joe "Lightning" Smith, Jr.'.

Dates and time%D

Read the same way as %q above, and then convert to a datetime value.

%{fmt}D

Read the same way as %q above, and then convert it to a datetime value. fmt describes the format of the input text. The fmt input is a character vector of letter identifiers that is a valid value for the Format property of a datetime. textscan converts text that does not match this format to NaT values.

For more information about datetime display formats, see the Format property for datetime arrays.

Example: '%{dd-MMM-yyyy}D' specifies the format of a date such as '01-Jan-2014' .

Category%C

Read the same way as %q, and then convert to a category name in a categorical array. textscan converts <undefined> text to an undefined value in the output categorical array.

Pattern-matching%[...]

Read as a cell array of character vectors, the characters inside the brackets up to the first nonmatching character. To include ] in the set, specify it first: %[]...].

Example: %[mus] reads 'summer ' as 'summ'.

%[^...]

Exclude characters inside the brackets, reading until the first matching character. To exclude ], specify it first: %[^]...].

Example: %[^xrg] reads 'summer ' as 'summe'.

Optional Operators

Conversion specifiers in formatSpec can include optional operators, which appear in the following order (includes spaces for clarity):

Optional operators include:

  • Fields and Characters to Ignore

    textscan reads all characters in your file in sequence, unless you tell it to ignore a particular field or a portion of a field.

    Insert an asterisk character (*) after the percent character (%) to skip a field or a portion of a character field.

    Operator

    Action Taken

    %*k

    Skip the field. k is any conversion specifier identifying the field to skip. textscan does not create an output cell for any such fields.

    Example: '%s %*s %s %s %*s %*s %s' (spaces are optional) converts the text
    'Blackbird singing in the dead of night' into four output cells with
    'Blackbird' 'in' 'the' 'night'

    '%*ns'

    Skip up to n characters, where n is an integer less than or equal to the number of characters in the field.

    Example: '%*3s %s' converts 'abcdefg' to 'defg'. When the delimiter is a comma, the same delimiter converts 'abcde,fghijkl' to a cell array containing 'de';'ijkl'.

    '%*nc'

    Skip n characters, including delimiter characters.

  • Field Width

    textscan reads the number of characters or digits specified by the field width or precision, or up to the first delimiter, whichever comes first. A decimal point, sign (+ or -), exponent character, and digits in the numeric exponent are counted as characters and digits within the field width. For complex numbers, the field width refers to the individual widths of the real part and the imaginary part. For the imaginary part, the field width includes + or − but not i or j. Specify the field width by inserting a number after the percent character (%) in the conversion specifier.

    Example: %5f reads '123.456' as 123.4.

    Example: %5c reads 'abcdefg' as 'abcde'.

    When the field width operator is used with single characters (%c), textscan also reads delimiter, white-space, and end-of-line characters.
    Example: %7c reads 7 characters, including white-space, so'Day and night' reads as 'Day and'.

  • Precision

    For floating-point numbers (%n, %f, %f32, %f64), you can specify the number of decimal digits to read.

    Example: %7.2f reads '123.456' as 123.45.

  • Literal Text to Ignore

    textscan ignores the text appended to the formatSpec conversion specifier.

    Example: Level%u8 reads 'Level1' as 1.

    Example: %u8Step reads '2Step' as 2.

Number of times to apply formatSpec, specified as a positive integer.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Input text to read.

Name-Value Pair Arguments

Specify optional comma-separated pairs of Name,Value arguments. Name is the argument name and Value is the corresponding value. Name must appear inside single quotes (' '). You can specify several name and value pair arguments in any order as Name1,Value1,...,NameN,ValueN.

Example: C = textscan(fileID,formatSpec,'HeaderLines',3,'Delimiter',',') skips the first three lines of the data, and then reads the remaining data, treating commas as a delimiter.

Names are not case sensitive.

collapse all

Logical indicator determining data concatenation, specified as the comma-separated pair consisting of 'CollectOutput' and either true or false. If true, then textscan concatenates consecutive output cells of the same fundamental MATLAB class into a single array.

Symbols designating text to ignore, specified as the comma-separated pair consisting of 'CommentStyle' and a character vector or a cell array of character vectors.

For example, specify a character such as '%' to ignore text following the symbol on the same line. Specify a cell array of two character vectors, such as {'/*', '*/'}, to ignore any text between those sequences.

textscan checks for comments only at the start of each field, not within a field.

Example: 'CommentStyle',{'/*', '*/'}

Locale for reading dates, specified as the comma-separated pair consisting of 'DateLocale' and a character vector in the form xx_YY, where xx is a lowercase ISO 639-1 two-letter code that specifies a language, and YY is an uppercase ISO 3166-1 alpha-2 code that specifies a country. For a list of common values for the locale, see the Locale name-value pair argument for the datetime function.

Use DateLocale to specify the locale in which textscan should interpret month and day of week names and abbreviations when reading text as dates using the %D format specifier.

Example: 'DateLocale','ja_JP'

Field delimiter characters, specified as the comma-separated pair consisting of 'Delimiter' and a character vector or a cell array of character vectors. Specify multiple delimiters in a cell array of character vectors.

Example: 'Delimiter',{';','*'}

textscan interprets repeated delimiter characters as separate delimiters, and returns an empty value to the output cell.

Within each row of data, the default field delimiter is white-space. White-space can be any combination of space (' '), backspace ('\b'), or tab ('\t') characters. If you do not specify a delimiter, then:

  • the delimiter characters are the same as the white-space characters. The default white-space characters are ' ', '\b', and '\t'. Use the 'Whitespace' name-value pair argument to specify alternate white-space characters.

  • textscan interprets repeated white-space characters as a single delimiter.

When you specify one of the following escape sequences as a delimiter, textscan converts that sequence to the corresponding control character:

\bBackspace
\nNewline
\rCarriage return
\tTab
\\Backslash (\)

Returned value for empty numeric fields in delimited text files, specified as the comma-separated pair consisting of 'EmptyValue' and a scalar.

End-of-line characters, specified as the comma-separated pair consisting of 'EndOfLine' and a character vector. The character vector must be '\r\n' or it must specify a single character. Common end-of-line characters are a newline character ('\n') or a carriage return ('\r'). If you specify '\r\n', then textscan treats any of \r, \n, and the combination of the two (\r\n) as end-of-line characters.

The default end-of-line sequence is \n, \r, or \r\n, depending on the contents of your file.

If there are missing values and an end-of-line sequence at the end of the last line in a file, then textscan returns empty values for those fields. This ensures that individual cells in output cell array, C, are the same size.

Example: 'EndOfLine',':'

Exponent characters, specified as the comma-separated pair consisting of 'ExpChars' and a character vector. The default exponent characters are e, E, d, and D.

Number of header lines, specified as the comma-separated pair consisting of 'HeaderLines' and a positive integer. textscan skips the header lines, including the remainder of the current line.

Multiple delimiter handling, specified as the comma-separated pair consisting of 'MultipleDelimsAsOne' and either true or false. If true, textscan treats consecutive delimiters as a single delimiter. Repeated delimiters separated by white-space are also treated as a single delimiter. You must also specify the Delimiter option.

Example: 'MultipleDelimsAsOne',1

Behavior when textscan fails to read or convert, specified as the comma-separated pair consisting of 'ReturnOnError' and either true or false. If true, textscan terminates without an error and returns all fields read. If false, textscan terminates with an error and does not return an output cell array.

Placeholder text to treat as empty value, specified as the comma-separated pair consisting of 'TreatAsEmpty' and a single character vector or a cell array of character vectors. This option only applies to numeric fields.

White-space characters, specified as the comma-separated pair consisting of 'Whitespace' and a character vector containing one or more characters. textscan adds a space character, char(32), to any specified Whitespace, unless Whitespace is empty ('') and formatSpec includes any conversion specifier.

When you specify one of the following escape sequences as any white-space character, textscan converts that sequence to the corresponding control character:

\bBackspace
\nNewline
\rCarriage return
\tTab
\\Backslash (\)

Output data type of text, specified as the comma-separated pair consisting of 'TextType' and either 'char' or 'string'. If you specify the value 'char', then textscan returns text as a cell array of character vectors. If you specify the value 'string', then textscan returns text as an array of type string.

Output Arguments

collapse all

File or text data, returned as a cell array.

For each numeric conversion specifier in formatSpec, the textscan function returns a K-by-1 MATLAB numeric vector to the output cell array, C, where K is the number of times that textscan finds a field matching the specifier.

For each text conversion specifier (%s, %q, or %[...]) in formatSpec, the textscan function returns a K-by-1 cell array of character vectors, where K is the number of times that textscan finds a field matching the specifier. For each character conversion that includes a field width operator, textscan returns a K-by-M character array, where M is the field width.

For each datetime or categorical conversion specifier in formatSpec, the textscan function returns a K-by-1 datetime or categorical vector to the output cell array, C, where K is the number of times that textscan finds a field matching the specifier.

Position at the end of the scan, in the file or the character vector, returned as an integer of class double. For a file, ftell(fileID) would return the same value after calling textscan. For a character vector, position indicates how many characters textscan read.

More About

collapse all

Algorithms

textscan converts numeric fields to the specified output type according to MATLAB rules regarding overflow, truncation, and the use of NaN, Inf, and -Inf. For example, MATLAB represents an integer NaN as zero. If textscan finds an empty field associated with an integer format specifier (such as %d or %u), it returns the empty value as zero and not NaN.

When matching data to a text conversion specifier, textscan reads until it finds a delimiter or an end-of-line character. When matching data to a numeric conversion specifier, textscan reads until it finds a nonnumeric character. When textscan can no longer match the data to a particular conversion specifier, it attempts to match the data to the next conversion specifier in the formatSpec. Sign (+ or -), exponent characters, and decimal points are considered numeric characters.

SignDigitsDecimal PointDigitsExponent CharacterSignDigits
Read one sign character if it exists.Read one or more digits.Read one decimal point if it exists.If there is a decimal point, read one or more digits that immediately follow it.Read one exponent character if it exists.If there is an exponent character, read one sign character.If there is an exponent character, read one or more digits that follow it.

textscan imports any complex number as a whole into a complex numeric field, converting the real and imaginary parts to the specified numeric type (such as %d or %f). Valid forms for a complex number are:

±<real>±<imag>i|j

Example: 5.7-3.1i

±<imag>i|j

Example: -7j

Do not include embedded white space in a complex number. textscan interprets embedded white space as a field delimiter.

See Also

| | | | | | |

Introduced before R2006a

Was this topic helpful?
MATLAB Documentation
Other Documentation
Support
Tackling Big Data with MATLAB

Tackling Big Data with MATLAB

Watch now